在Swift中，枚举类型可以像EnumType一样访问。案例:

let tableView = UITableView(frame: self.view. view)UITableViewStyle.Plain)

大多数情况下，只有当您有几个选项可以使用，并且确切地知道在每个选项上要做什么时，才会使用枚举类型。

在处理枚举类型时，使用for-in结构没有太大意义。

你可以这样做，例如:

func sumNumbers(numbers : Int...) -> Int {
    var sum = 0

    for number in numbers{
        sum += number
    }

    return sum
}

枚举有toRaw()和fromRaw()方法。所以如果你的原始值是Int，你可以从第一个枚举迭代到最后一个枚举:

enum Suit: Int {
    case Spades = 1
    case Hearts, Diamonds, Clubs
    func simpleDescription() -> String {
        switch self {
        case .Spades:
            return "spades"
        case .Hearts:
            return "hearts"
        case .Diamonds:
            return "diamonds"
        case .Clubs:
            return "clubs"
        }
    }
}

for i in Suit.Spades.toRaw()...Suit.Clubs.toRaw() {
    if let covertedSuit = Suit.fromRaw(i) {
        let description = covertedSuit.simpleDescription()
    }
}

一个问题是在运行simpleDescription方法之前需要测试可选值，因此我们首先将convertedSuit设置为我们的值，然后将常量设置为convertedSuit.simpleDescription()

原则上，如果你不为enum的大小写使用原始值赋值，这样做是可能的:

enum RankEnum: Int {
  case Ace
  case One
  case Two
}

class RankEnumGenerator: Generator {
    var i = 0
    typealias Element = RankEnum
    func next() -> Element? {
        let r = RankEnum.fromRaw(i)
        i += 1
        return r
    }
}

extension RankEnum {
    static func enumerate() -> SequenceOf<RankEnum> {
        return SequenceOf<RankEnum>({ RankEnumGenerator() })
    }
}

for r in RankEnum.enumerate() {
    println("\(r.toRaw())")
}

这看起来像一个黑客，但如果你使用原始值，你可以这样做

enum Suit: Int {  
    case Spades = 0, Hearts, Diamonds, Clubs  
 ...  
}  

var suitIndex = 0  
while var suit = Suit.fromRaw(suitIndex++) {  
   ...  
}  

它花了我一点，而不仅仅是一个方法在结构像swift书调用，但我在枚举中设置了下一个函数。我会使用一个协议，我不知道为什么，但有秩设置为int混乱。

enum Rank: Int {
    case Ace = 1
    case Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten
    case Jack, Queen, King
    func simpleDescription() -> String {
        switch self {
        case .Ace:
            return "ace"
        case .Jack:
            return "jack"
        case .Queen:
            return "Queen"
        case .King:
            return "King"
        default:
            return String(self.toRaw())
        }
    }
    mutating func next() -> Rank {
        var rank = self
        var rawrank = rank.toRaw()
        var nrank: Rank = self
        rawrank = rawrank + 1
        if let newRank = Rank.fromRaw(rawrank) {
            println("\(newRank.simpleDescription())")
            nrank = newRank
        } else {
            return self
        }
        return nrank
    }
}

enum Suit {
    case Spades, Hearts, Diamonds, Clubs
    func color() -> String {
        switch self {
        case .Spades, .Clubs:
            return "black"
        default:
            return "red"
        }
    }
    func simpleDescription() -> String {
        switch self {
        case .Spades:
            return "spades"
        case .Hearts:
            return "hearts"
        case .Diamonds:
            return "diamonds"
        case .Clubs:
            return "clubs"
        }
    }
    mutating func next() -> Suit {
        switch self {
        case .Spades:
            return Hearts
        case .Hearts:
            return Diamonds
        case .Diamonds:
            return Clubs
        case .Clubs:
            return Spades
        }
    }
}

struct Card {
    var rank: Rank
    var suit: Suit
    func deck() -> Card[] {
        var tRank = self.rank
        var tSuit = self.suit
        let tcards = 52 // we start from 0
        var cards: Card[] = []
        for i in 0..tcards {
            var card = Card(rank: tRank, suit: tSuit)
            cards.append(card)
            tRank = tRank.next()
            tSuit = tSuit.next()
        }
        return cards
    }
    func simpleDescription() -> String {
        return "The \(rank.simpleDescription()) of \(suit.simpleDescription())"
    }
}

var card = Card(rank: .Ace, suit: .Spades)
var deck = card.deck()

我使用了一些常识，但这可以通过将花色乘以等级来轻松纠正(如果你没有使用标准的桥牌，你必须相应地改变枚举，如果基本上只是通过不同的枚举进行步骤)。为了节省时间，我使用了ranks rawValues，如果你愿意，你也可以为西装做同样的事情。然而，这个例子没有它，所以我决定在不改变suit rawValue的情况下找出它

我使用了下面的方法，假设我知道哪个是Rank enum中的最后一个值，所有的Rank在Ace之后都有增量值

我喜欢这种方式，因为它干净，小，容易理解

 func cardDeck() -> Card[] {
     var cards: Card[] = []
     let minRank = Rank.Ace.toRaw()
     let maxRank = Rank.King.toRaw()

     for rank in minRank...maxRank {
         if var convertedRank: Rank = Rank.fromRaw(rank) {
             cards.append(Card(rank: convertedRank, suite: Suite.Clubs))
             cards.append(Card(rank: convertedRank, suite: Suite.Diamonds))
             cards.append(Card(rank: convertedRank, suite: Suite.Hearts))
             cards.append(Card(rank: convertedRank, suite: Suite.Spades))
         }
    }

    return cards
}

有一种聪明的方法，尽管令人沮丧，但它说明了两种不同类型的枚举之间的区别。

试试这个:

    func makeDeck() -> Card[] {
      var deck: Card[] = []
      var suits: Suit[] = [.Hearts, .Diamonds, .Clubs, .Spades]
      for i in 1...13 {
        for suit in suits {
          deck += Card(rank: Rank.fromRaw(i)!, suit: suit)
        }
      }
      return deck
    }

交易是，一个由数字(原始值)支持的枚举是隐式显式有序的，而一个没有数字支持的枚举是显式隐式无序的。

例如，当我们给枚举值数字时，语言足够狡猾，可以找出数字的顺序。 另一方面，如果我们不给它任何顺序，当我们尝试迭代这些值时，语言就会举起双手说:“是的，但你想先执行哪个??”

其他可以做到这一点(迭代无序枚举)的语言可能是相同的语言，其中所有内容实际上都是一个地图或字典，你可以迭代地图的键，无论是否有任何逻辑顺序。

诀窍是给它提供一些显式排序的东西，在这个例子中，suit的实例在数组中按照我们想要的顺序。一旦你这么说，霉霉就会说“你为什么不一开始就这么说呢?”

另一个简写技巧是在fromRaw函数上使用强制操作符。这说明了关于枚举的另一个“陷阱”，即可能传入的值的范围通常大于枚举的范围。例如，如果我们说Rank.fromRaw(60)，就不会返回值，所以我们使用了语言的可选特性，在我们开始使用可选特性的地方，很快就会出现强制。(或者交替if let结构，这对我来说仍然有点奇怪)

enum Rank: Int
{
    case Ace = 0
    case Two, Three, Four, Five, Six, Seve, Eight, Nine, Ten
    case Jack, Queen, King
    case Count
}

enum Suit : Int
{
    case Spades = 0
    case Hearts, Diamonds, Clubs
    case Count
}

struct Card
{
    var rank:Rank
    var suit:Suit
}

class Test
{
    func makeDeck() -> Card[]
    {
        let suitsCount:Int = Suit.Count.toRaw()
        let rankCount:Int = Rank.Count.toRaw()
        let repeatedCard:Card = Card(rank:Rank.Ace, suit:Suit.Spades)
        let deck:Card[] = Card[](count:suitsCount*rankCount, repeatedValue:repeatedCard)

        for i:Int in 0..rankCount
        {
            for j:Int in 0..suitsCount
            {
                deck[i*suitsCount+j] = Card(rank: Rank.fromRaw(i)!, suit: Suit.fromRaw(j)!)
            }
        }
        return deck
    }
}

根据Rick的回答:这要快5倍

该解决方案在可读性和可维护性之间取得了适当的平衡。

struct Card {

    // ...

    static func deck() -> Card[] {
        var deck = Card[]()
        for rank in Rank.Ace.toRaw()...Rank.King.toRaw() {
            for suit in [Suit.Spades, .Hearts, .Clubs, .Diamonds] {
                let card = Card(rank: Rank.fromRaw(rank)!, suit: suit)
                deck.append(card)
            }
        }
    return deck
    }
}

let deck = Card.deck()

如果您仍然想为Rank和Suit使用枚举，这里有一个不那么神秘的例子。如果您想使用for-in循环遍历每个对象，只需将它们收集到一个Array中。

标准52张牌的例子:

enum Rank: Int {
    case Ace = 1, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King
    func name() -> String {
        switch self {
        case .Ace:
            return "ace"
        case .Jack:
            return "jack"
        case .Queen:
            return "queen"
        case .King:
            return "king"
        default:
            return String(self.toRaw())
        }
    }
}

enum Suit: Int {
    case Diamonds = 1, Clubs, Hearts, Spades
    func name() -> String {
        switch self {
        case .Diamonds:
            return "diamonds"
        case .Clubs:
            return "clubs"
        case .Hearts:
            return "hearts"
        case .Spades:
            return "spades"
        default:
            return "NOT A VALID SUIT"
        }
    }
}

let Ranks = [
    Rank.Ace,
    Rank.Two,
    Rank.Three,
    Rank.Four,
    Rank.Five,
    Rank.Six,
    Rank.Seven,
    Rank.Eight,
    Rank.Nine,
    Rank.Ten,
    Rank.Jack,
    Rank.Queen,
    Rank.King
]

let Suits = [
    Suit.Diamonds,
    Suit.Clubs,
    Suit.Hearts,
    Suit.Spades
]


class Card {
    var rank: Rank
    var suit: Suit

    init(rank: Rank, suit: Suit) {
        self.rank = rank
        self.suit = suit
    }
}

class Deck {
    var cards = Card[]()

    init() {
        for rank in Ranks {
            for suit in Suits {
                cards.append(Card(rank: rank, suit: suit))
            }
        }
    }
}

var myDeck = Deck()
myDeck.cards.count  // => 52

这篇文章是相关的https://www.swift-studies.com/blog/2014/6/10/enumerating-enums-in-swift

基本上，提议的解决方案是

enum ProductCategory : String {
     case Washers = "washers", Dryers = "dryers", Toasters = "toasters"

     static let allValues = [Washers, Dryers, Toasters]
}

for category in ProductCategory.allValues{
     //Do something
}

其他的解决方法都是可行的，但它们都假设了可能的等级和花色的数量，或者第一和最后的等级是什么。的确，在可预见的未来，一副纸牌的布局可能不会有太大变化。然而，一般来说，编写尽可能少假设的代码会更简洁。我的解决方案:

我已经在Suit枚举中添加了一个原始类型，所以我可以使用Suit(rawValue:)来访问Suit案例:

enum Suit: Int {
    case Spades = 1
    case Hearts, Diamonds, Clubs
    func simpleDescription() -> String {
        switch self {
            case .Spades:
                return "spades"
            case .Hearts:
                return "hearts"
            case .Diamonds:
                return "diamonds"
            case .Clubs:
                return "clubs"
        }
    }
    func color() -> String {
        switch self {
        case .Spades:
            return "black"
        case .Clubs:
            return "black"
        case .Diamonds:
            return "red"
        case .Hearts:
            return "red"
        }
    }
}

enum Rank: Int {
    case Ace = 1
    case Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten
    case Jack, Queen, King
    func simpleDescription() -> String {
        switch self {
            case .Ace:
                return "ace"
            case .Jack:
                return "jack"
            case .Queen:
                return "queen"
            case .King:
                return "king"
            default:
                return String(self.rawValue)
        }
    }
}

在Card的createDeck()方法实现的下面。init(rawValue:)是一个可失败的初始化式，返回一个可选值。通过在两个while语句中展开并检查它的值，不需要假设Rank或Suit情况的数量:

struct Card {
    var rank: Rank
    var suit: Suit
    func simpleDescription() -> String {
        return "The \(rank.simpleDescription()) of \(suit.simpleDescription())"
    }
    func createDeck() -> [Card] {
        var n = 1
        var deck = [Card]()
        while let rank = Rank(rawValue: n) {
            var m = 1
            while let suit = Suit(rawValue: m) {
                deck.append(Card(rank: rank, suit: suit))
                m += 1
            }
            n += 1
        }
        return deck
    }
}

下面是如何调用createDeck方法:

let card = Card(rank: Rank.Ace, suit: Suit.Clubs)
let deck = card.createDeck()

您可以通过实现ForwardIndexType协议来迭代枚举。

ForwardIndexType协议要求您定义一个继任者()函数来逐级遍历元素。

enum Rank: Int, ForwardIndexType {
    case Ace = 1
    case Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten
    case Jack, Queen, King

    // ... other functions

    // Option 1 - Figure it out by hand
    func successor() -> Rank {
        switch self {
            case .Ace:
              return .Two
            case .Two:
              return .Three

            // ... etc.

            default:
              return .King
        }
    }

    // Option 2 - Define an operator!
    func successor() -> Rank {
        return self + 1
    }
}

// NOTE: The operator is defined OUTSIDE the class
func + (left: Rank, right: Int) -> Rank {
    // I'm using to/from raw here, but again, you can use a case statement
    // or whatever else you can think of

    return left == .King ? .King : Rank(rawValue: left.rawValue + right)!
}

在开或闭范围内迭代(..<或…)将在内部调用继任者()函数，允许你这样写:

// Under the covers, successor(Rank.King) and successor(Rank.Ace) are called to establish limits
for r in Rank.Ace...Rank.King {
    // Do something useful
}

enum Rank: Int {
    case Ace = 1
    case Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten
    case Jack, Queen, King

    func simpleDescription() -> String {
        switch self {
        case .Ace: return "ace"
        case .Jack: return "jack"
        case .Queen: return "queen"
        case .King: return "king"
        default: return String(self.toRaw())
        }
    }
}

enum Suit: Int {
    case Spades = 1
    case Hearts, Diamonds, Clubs

    func simpleDescription() -> String {
        switch self {
        case .Spades: return "spades"
        case .Hearts: return "hearts"
        case .Diamonds: return "diamonds"
        case .Clubs: return "clubs"
        }
    }

    func color() -> String {
        switch self {
        case .Spades, .Clubs: return "black"
        case .Hearts, .Diamonds: return "red"
        }
    }
}

struct Card {
    var rank: Rank
    var suit: Suit
    func simpleDescription() -> String {
        return "The \(rank.simpleDescription()) of \(suit.simpleDescription())"
    }

    static func createPokers() -> Card[] {
        let ranks = Array(Rank.Ace.toRaw()...Rank.King.toRaw())
        let suits = Array(Suit.Spades.toRaw()...Suit.Clubs.toRaw())
        let cards = suits.reduce(Card[]()) { (tempCards, suit) in
            tempCards + ranks.map { rank in
                Card(rank: Rank.fromRaw(rank)!, suit: Suit.fromRaw(suit)!)
            }
        }
        return cards
    }
}

以下是我的建议。这不是完全令人满意的(我对Swift和OOP很陌生!)，但也许有人可以改进它。这个想法是让每个枚举提供自己的范围信息作为.first和.last属性。它只向每个枚举添加了两行代码:仍然有点硬编码，但至少它没有复制整个集合。它确实需要将Suit enum修改为Int类型，就像Rank enum一样，而不是无类型的。

而不是重复整个解决方案，下面是我添加到。在case语句之后的某个地方(Suit enum类似):

var first: Int { return Ace.toRaw() }
var last: Int { return King.toRaw() }

以及我用来将deck构建为String数组的循环。(问题定义没有说明牌组是如何构造的。)

func createDeck() -> [String] {
    var deck: [String] = []
    var card: String
    for r in Rank.Ace.first...Rank.Ace.last {
        for s in Suit.Hearts.first...Suit.Hearts.last {
            card = Rank.simpleDescription( Rank.fromRaw(r)!)() + " of " + Suit.simpleDescription( Suit.fromRaw(s)!)()
           deck.append( card)
       }
    }
    return deck
}

这并不令人满意，因为属性与元素而不是enum相关联。但它确实为“for”循环增加了清晰度。我希望它是Rank。而不是Rank.Ace.first。它适用于任何元素，但很难看。有人能演示一下如何将其提升到enum级别吗?

为了使它工作，我从Card结构中提取了createDeck方法。我不知道如何从该结构返回一个[String]数组，这似乎是一个糟糕的地方，把这样的方法无论如何。

有时，您可能会处理具有底层原始整数类型的枚举类型，这种类型在整个软件开发生命周期中都会发生变化。下面是一个很适合这种情况的例子:

public class MyClassThatLoadsTexturesEtc
{
    //...

    // Colors used for gems and sectors.
    public enum Color: Int
    {
        // Colors arranged in order of the spectrum.
        case First = 0
        case Red, Orange, Yellow, Green, Blue, Purple, Pink
        // --> Add more colors here, between the first and last markers.
        case Last
    }

    //...

    public func preloadGems()
    {
        // Preload all gems.
        for i in (Color.First.toRaw() + 1) ..< (Color.Last.toRaw())
        {
            let color = Color.fromRaw(i)!
            loadColoredTextures(forKey: color)
        }
    }

    //...
}

我使用计算属性，它返回所有值的数组(感谢这篇文章http://natecook.com/blog/2014/10/loopy-random-enum-ideas/)。但是，它也使用int原始值，但我不需要在单独的属性中重复枚举的所有成员。

Xcode 6.1在如何使用rawValue获取enum成员方面做了一点改变，所以我修正了listing。还修复了第一个rawValue错误的小错误。

enum ValidSuits: Int {
    case Clubs = 0, Spades, Hearts, Diamonds
    func description() -> String {
        switch self {
        case .Clubs:
            return "♣︎"
        case .Spades:
            return "♠︎"
        case .Diamonds:
            return "♦︎"
        case .Hearts:
            return "♥︎"
        }
    }

    static var allSuits: [ValidSuits] {
        return Array(
            SequenceOf {
                () -> GeneratorOf<ValidSuits> in
                var i=0
                return GeneratorOf<ValidSuits> {
                    return ValidSuits(rawValue: i++)
                }
            }
        )
    }
}

实验内容是: 实验

在Card中添加一个方法，用于创建一副完整的牌，每一副牌都是rank和花色的组合。

因此，除了添加方法之外，没有修改或增强给定的代码(并且没有使用还没有教过的东西)，我想出了这个解决方案:

struct Card {
    var rank: Rank
    var suit: Suit

    func simpleDescription() -> String {
        return "The \(rank.simpleDescription()) of \(suit.simpleDescription())"
    }

    func createDeck() -> [Card] {
        var deck: [Card] = []
        for rank in Rank.Ace.rawValue...Rank.King.rawValue {
            for suit in Suit.Spades.rawValue...Suit.Clubs.rawValue {
                let card = Card(rank: Rank(rawValue: rank)!, suit: Suit(rawValue: suit)!)
                //println(card.simpleDescription())
                deck += [card]
            }
        }
        return deck
    }
}
let threeOfSpades = Card(rank: .Three, suit: .Spades)
let threeOfSpadesDescription = threeOfSpades.simpleDescription()
let deck = threeOfSpades.createDeck()

我创建了一个实用函数iterateEnum()，用于迭代任意枚举类型的情况。

下面是示例用法:

enum Suit: String {
    case Spades = "♠"
    case Hearts = "♥"
    case Diamonds = "♦"
    case Clubs = "♣"
}

for f in iterateEnum(Suit) {
    println(f.rawValue)
}

输出:

♠
♥
♦
♣

但是，这仅用于调试或测试目的:这依赖于几个未记录的Swift1.1编译器行为，因此，使用它的风险由您自己承担。

代码如下:

func iterateEnum<T: Hashable>(_: T.Type) -> GeneratorOf<T> {
    var cast: (Int -> T)!
    switch sizeof(T) {
        case 0: return GeneratorOf(GeneratorOfOne(unsafeBitCast((), T.self)))
        case 1: cast = { unsafeBitCast(UInt8(truncatingBitPattern: $0), T.self) }
        case 2: cast = { unsafeBitCast(UInt16(truncatingBitPattern: $0), T.self) }
        case 4: cast = { unsafeBitCast(UInt32(truncatingBitPattern: $0), T.self) }
        case 8: cast = { unsafeBitCast(UInt64($0), T.self) }
        default: fatalError("cannot be here")
    }

    var i = 0
    return GeneratorOf {
        let next = cast(i)
        return next.hashValue == i++ ? next : nil
    }
}

其基本思想是:

枚举的内存表示，不包括有关联类型的枚举，只是一个案例的索引，当案例的计数是2…256，它和UInt8是一样的，当257…65536，它是UInt16等等。因此，它可以是unsafeBitcast对应的无符号整数类型。 枚举值的. hashvalue与case的索引相同。 从无效索引位转换的枚举值的. hashvalue为0。

为Swift2修改，并从@Kametrixom的回答中实现了选角想法:

func iterateEnum<T: Hashable>(_: T.Type) -> AnyGenerator<T> {
    var i = 0
    return anyGenerator {
        let next = withUnsafePointer(&i) { UnsafePointer<T>($0).memory }
        return next.hashValue == i++ ? next : nil
    }
}

对Swift3的修订:

func iterateEnum<T: Hashable>(_: T.Type) -> AnyIterator<T> {
    var i = 0
    return AnyIterator {
        let next = withUnsafePointer(to: &i) {
            $0.withMemoryRebound(to: T.self, capacity: 1) { $0.pointee }
        }
        if next.hashValue != i { return nil }
        i += 1
        return next
    }
}

针对Swift3.0.1修订:

func iterateEnum<T: Hashable>(_: T.Type) -> AnyIterator<T> {
    var i = 0
    return AnyIterator {
        let next = withUnsafeBytes(of: &i) { $0.load(as: T.self) }
        if next.hashValue != i { return nil }
        i += 1
        return next
    }
}

我的解决方案是声明一个包含所有枚举可能性的数组。所以for循环可以遍历所有这些。

//Function inside struct Card
static func generateFullDeck() -> [Card] {
    let allRanks = [Rank.Ace, Rank.Two, Rank.Three, Rank.Four, Rank.Five, Rank.Six, Rank.Seven, Rank.Eight, Rank.Nine, Rank.Ten, Rank.Jack, Rank.Queen, Rank.King]
    let allSuits = [Suit.Hearts, Suit.Diamonds, Suit.Clubs, Suit.Spades]
    var myFullDeck: [Card] = []

    for myRank in allRanks {
        for mySuit in allSuits {
            myFullDeck.append(Card(rank: myRank, suit: mySuit))
        }
    }
    return myFullDeck
}

//actual use:
let aFullDeck = Card.generateFullDeck()    //Generate the desired full deck

var allDesc: [String] = []
for aCard in aFullDeck {
    println(aCard.simpleDescription())    //You'll see all the results in playground
}

enum Rank: Int {
    ...
    static let ranks = (Rank.Ace.rawValue ... Rank.King.rawValue).map{Rank(rawValue: $0)! }

}
enum Suit {
    ...
    static let suits = [Spades, Hearts, Diamonds, Clubs]
}

struct Card {
    ...
    static func fullDesk() -> [Card] {
        var desk: [Card] = []
        for suit in Suit.suits {
            for rank in Rank.ranks {
                desk.append(Card(rank: rank,suit: suit))
            }
        }
        return desk
    }
}

这个怎么样?

在处理Swift 2.0时，以下是我的建议:

我已经将原始类型添加到Suit enum

enum Suit: Int {

然后:

struct Card {
    var rank: Rank
    var suit: Suit


    func fullDeck()-> [Card] {

        var deck = [Card]()

        for i in Rank.Ace.rawValue...Rank.King.rawValue {

            for j in Suit.Spades.rawValue...Suit.Clubs.rawValue {

                deck.append(Card(rank:Rank(rawValue: i)! , suit: Suit(rawValue: j)!))
            }
        }

        return deck
    }
}

对不起，我的回答是具体到我如何在我需要做的事情中使用这篇文章。对于那些无意中遇到这个问题的人，寻找一种方法在枚举中找到一个case，这是一种方法(Swift 2新增):

编辑:小写驼峰现在是Swift 3 enum值的标准

// From apple docs: If the raw-value type is specified as String and you don’t assign values to the cases explicitly, each unassigned case is implicitly assigned a string with the same text as the name of that case.

enum Theme: String
    {
    case white, blue, green, lavender, grey
    }

func loadTheme(theme: String)
    {
    // this checks the string against the raw value of each enum case (note that the check could result in a nil value, since it's an optional, which is why we introduce the if/let block
    if let testTheme = Theme(rawValue: theme)
        {
        // testTheme is guaranteed to have an enum value at this point
        self.someOtherFunction(testTheme)
        }
    }

对于那些对枚举感到疑惑的人来说，本页上给出的答案包括一个包含所有枚举值的数组的静态var/let是正确的。最新的苹果tvOS示例代码包含了完全相同的技术。

也就是说，他们应该在语言中构建一个更方便的机制(苹果，你在听吗?)

如果你给枚举一个原始的Int值，它将使循环更容易。

例如，你可以使用anyGenerator来获得一个可以枚举你的值的生成器:

enum Suit: Int, CustomStringConvertible {
    case Spades, Hearts, Diamonds, Clubs
    var description: String {
        switch self {
        case .Spades:   return "Spades"
        case .Hearts:   return "Hearts"
        case .Diamonds: return "Diamonds"
        case .Clubs:    return "Clubs"
        }
    }
    static func enumerate() -> AnyGenerator<Suit> {
        var nextIndex = Spades.rawValue
        return anyGenerator { Suit(rawValue: nextIndex++) }
    }
}
// You can now use it like this:
for suit in Suit.enumerate() {
    suit.description
}
// or like this:
let allSuits: [Suit] = Array(Suit.enumerate())

然而，这看起来像一个相当常见的模式，如果我们可以通过简单地遵循协议使任何枚举类型可枚举，这不是很好吗?有了Swift 2.0和协议扩展，现在我们可以了!

简单地添加到你的项目:

protocol EnumerableEnum {
    init?(rawValue: Int)
    static func firstValue() -> Int
}
extension EnumerableEnum {
    static func enumerate() -> AnyGenerator<Self> {
        var nextIndex = firstRawValue()
        return anyGenerator { Self(rawValue: nextIndex++) }
    }
    static func firstRawValue() -> Int { return 0 }
}

现在，任何时候你创建一个枚举(只要它有一个Int原始值)，你可以通过遵循协议使它可枚举:

enum Rank: Int, EnumerableEnum {
    case Ace, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King
}
// ...
for rank in Rank.enumerate() { ... }

如果你的枚举值不以0开头(默认值)，重写firstRawValue方法:

enum DeckColor: Int, EnumerableEnum {
    case Red = 10, Blue, Black
    static func firstRawValue() -> Int { return Red.rawValue }
}
// ...
let colors = Array(DeckColor.enumerate())

最后一个Suit类，包括用更标准的CustomStringConvertible协议替换simpleDescription，看起来像这样:

enum Suit: Int, CustomStringConvertible, EnumerableEnum {
    case Spades, Hearts, Diamonds, Clubs
    var description: String {
        switch self {
        case .Spades:   return "Spades"
        case .Hearts:   return "Hearts"
        case .Diamonds: return "Diamonds"
        case .Clubs:    return "Clubs"
        }
    }
}
// ...
for suit in Suit.enumerate() {
    print(suit.description)
}

Swift 3语法:

protocol EnumerableEnum {
    init?(rawValue: Int)
    static func firstRawValue() -> Int
}

extension EnumerableEnum {
    static func enumerate() -> AnyIterator<Self> {
        var nextIndex = firstRawValue()

        let iterator: AnyIterator<Self> = AnyIterator {
            defer { nextIndex = nextIndex + 1 }
            return Self(rawValue: nextIndex)
        }

        return iterator
    }

    static func firstRawValue() -> Int {
        return 0
    }
}

我在比特和字节中跌跌撞撞，创建了一个扩展，后来我发现它与@rintaro的答案非常相似。它是这样使用的:

enum E : EnumCollection {
    case A, B, C
}

Array(E.cases())    // [A, B, C]

值得注意的是，它可以在任何没有关联值的enum上使用。注意，这对于没有大小写的枚举不起作用。

与@rintaro的答案一样，这段代码使用枚举的底层表示。这种表示没有文档化，将来可能会改变，这会破坏它。我不建议在生产中使用这种方法。

代码(Swift 2.2, Xcode 7.3.1，不工作在Xcode 10):

protocol EnumCollection : Hashable {}
extension EnumCollection {
    static func cases() -> AnySequence<Self> {
        typealias S = Self
        return AnySequence { () -> AnyGenerator<S> in
            var raw = 0
            return AnyGenerator {
                let current : Self = withUnsafePointer(&raw) { UnsafePointer($0).memory }
                guard current.hashValue == raw else { return nil }
                raw += 1
                return current
            }
        }
    }
}

代码(Swift 3, Xcode 8.1，不工作在Xcode 10):

protocol EnumCollection : Hashable {}
extension EnumCollection {
    static func cases() -> AnySequence<Self> {
        typealias S = Self
        return AnySequence { () -> AnyIterator<S> in
            var raw = 0
            return AnyIterator {
                let current : Self = withUnsafePointer(to: &raw) { $0.withMemoryRebound(to: S.self, capacity: 1) { $0.pointee } }
                guard current.hashValue == raw else { return nil }
                raw += 1
                return current
            }
        }
    }
}

我不知道为什么我需要typealias，但编译器抱怨没有它。

这个问题现在简单多了。以下是我的Swift 4.2解决方案:

enum Suit: Int, CaseIterable {
  case None
  case Spade, Heart, Diamond, Club

  static let allNonNullCases = Suit.allCases[Spade.rawValue...]
}

enum Rank: Int, CaseIterable {
  case Joker
  case Two, Three, Four, Five, Six, Seven, Eight
  case Nine, Ten, Jack, Queen, King, Ace

  static let allNonNullCases = Rank.allCases[Two.rawValue...]
}

func makeDeck(withJoker: Bool = false) -> [Card] {
  var deck = [Card]()
  for suit in Suit.allNonNullCases {
    for rank in Rank.allNonNullCases {
      deck.append(Card(suit: suit, rank: rank))
    }
  }
  if withJoker {
    deck.append(Card(suit: .None, rank: .Joker))
  }
  return deck
}

4。2:

我喜欢这个解决方案，我把找到“列表理解在Swift”。

它使用Int rawws而不是string，但它避免了键入两次，它允许自定义范围，并且不硬编码原始值。

这是我最初解决方案的Swift 4版本，但请参阅上面的4.2改进:

enum Suit: Int {
  case None
  case Spade, Heart, Diamond, Club

  static let allRawValues = Suit.Spade.rawValue...Suit.Club.rawValue
  static let allCases = Array(allRawValues.map{ Suit(rawValue: $0)! })
}
enum Rank: Int {
  case Joker
  case Two, Three, Four, Five, Six
  case Seven, Eight, Nine, Ten
  case Jack, Queen, King, Ace

  static let allRawValues = Rank.Two.rawValue...Rank.Ace.rawValue
  static let allCases = Array(allRawValues.map{ Rank(rawValue: $0)! })
}
func makeDeck(withJoker: Bool = false) -> [Card] {
  var deck = [Card]()
  for suit in Suit.allCases {
    for rank in Rank.allCases {
      deck.append(Card(suit: suit, rank: rank))
    }
  }
  if withJoker {
    deck.append(Card(suit: .None, rank: .Joker))
  }
  return deck
}

更新到Swift 2.2+

func iterateEnum<T: Hashable>(_: T.Type) -> AnyGenerator<T> {
    var i = 0
    return AnyGenerator {
        let next = withUnsafePointer(&i) {
            UnsafePointer<T>($0).memory
        }
        if next.hashValue == i {
            i += 1
            return next
        } else {
            return nil
        }
    }
}

它更新了Swift 2.2表单@Kametrixom的答案

Swift 3.0+(非常感谢@Philip)

func iterateEnum<T: Hashable>(_: T.Type) -> AnyIterator<T> {
    var i = 0
    return AnyIterator {
        let next = withUnsafePointer(&i) {
            UnsafePointer<T>($0).pointee
        }
        if next.hashValue == i {
            i += 1
            return next
        } else {
            return nil
        }
    }
}

这是一个相当老的帖子，来自Swift 2.0。现在有一些更好的解决方案，使用了swift 3.0的新特性: 在Swift 3.0中迭代一个Enum

关于这个问题，有一个解决方案，它使用了Swift 4.2的一个新功能(在我写这篇编辑时还没有发布): 我如何得到一个Swift枚举的计数?

在这个帖子中有很多好的解决方案，但其中一些非常复杂。我喜欢尽可能地简化。这里有一个解决方案，可能适用于不同的需求，但我认为它在大多数情况下都很好:

enum Number: String {
    case One
    case Two
    case Three
    case Four
    case EndIndex

    func nextCase () -> Number
    {
        switch self {
        case .One:
            return .Two
        case .Two:
            return .Three
        case .Three:
            return .Four
        case .Four:
            return .EndIndex

        /* 
        Add all additional cases above
        */
        case .EndIndex:
            return .EndIndex
        }
    }

    static var allValues: [String] {
        var array: [String] = Array()
        var number = Number.One

        while number != Number.EndIndex {
            array.append(number.rawValue)
            number = number.nextCase()
        }
        return array
    }
}

迭代:

for item in Number.allValues {
    print("number is: \(item)")
}

与@Kametrixom的答案在这里，我相信返回一个数组将比返回AnySequence更好，因为你可以访问所有数组的好东西，如计数等。

以下是改写后的内容:

public protocol EnumCollection : Hashable {}
extension EnumCollection {
    public static func allValues() -> [Self] {
        typealias S = Self
        let retVal = AnySequence { () -> AnyGenerator<S> in
            var raw = 0
            return AnyGenerator {
                let current : Self = withUnsafePointer(&raw) { UnsafePointer($0).memory }
                guard current.hashValue == raw else { return nil }
                raw += 1
                return current
            }
        }

        return [S](retVal)
    }
}

我发现自己在代码中经常使用. allvalues。我终于找到了一种方法来简单地遵循Iteratable协议并拥有一个rawValues()方法。

protocol Iteratable {}
extension RawRepresentable where Self: RawRepresentable {

    static func iterateEnum<T: Hashable>(_: T.Type) -> AnyIterator<T> {
        var i = 0
        return AnyIterator {
            let next = withUnsafePointer(to: &i) {
                $0.withMemoryRebound(to: T.self, capacity: 1) { $0.pointee }
            }
            if next.hashValue != i { return nil }
            i += 1
            return next
        }
    }
}

extension Iteratable where Self: RawRepresentable, Self: Hashable {
    static func hashValues() -> AnyIterator<Self> {
        return iterateEnum(self)
    }

    static func rawValues() -> [Self.RawValue] {
        return hashValues().map({$0.rawValue})
    }
}


// Example
enum Grocery: String, Iteratable {
    case Kroger = "kroger"
    case HEB = "h.e.b."
    case Randalls = "randalls"
}

let groceryHashes = Grocery.hashValues() // AnyIterator<Grocery>
let groceryRawValues = Grocery.rawValues() // ["kroger", "h.e.b.", "randalls"]

Xcode 10与Swift 4.2

enum Filter: String, CaseIterable {

    case salary = "Salary"
    case experience = "Experience"
    case technology = "Technology"
    case unutilized = "Unutilized"
    case unutilizedHV = "Unutilized High Value"

    static let allValues = Filter.allCases.map { $0.rawValue }
}

叫它

print(Filter.allValues)

打印:

[“薪酬”、“经验”、“技术”、“未利用”、“未利用的高价值”]

旧版本

对于表示Int的enum

enum Filter: Int {
    case salary
    case experience
    case technology
    case unutilized
    case unutilizedHV
    
    static let allRawValues = salary.rawValue...unutilizedHV.rawValue  // First to last case
    static let allValues = allRawValues.map { Filter(rawValue: $0)!.rawValue }
}

这样叫它:

print(Filter.allValues)

打印:

[0, 1, 2, 3, 4]

用于表示字符串的enum

enum Filter: Int {
    case salary
    case experience
    case technology
    case unutilized
    case unutilizedHV
    
    static let allRawValues = salary.rawValue...unutilizedHV.rawValue  // First to last case
    static let allValues = allRawValues.map { Filter(rawValue: $0)!.description }
}

extension Filter: CustomStringConvertible {
    var description: String {
        switch self {
        case .salary: return "Salary"
        case .experience: return "Experience"
        case .technology: return "Technology"
        case .unutilized: return "Unutilized"
        case .unutilizedHV: return "Unutilized High Value"
        }
    }
}

叫它

print(Filter.allValues)

打印:

[“薪酬”、“经验”、“技术”、“未利用”、“未利用的高价值”]

在Swift 3中，当底层枚举有rawValue时，你可以实现Strideable协议。优点是不像其他建议那样创建值数组，并且标准的Swift“for in”循环工作，这是一个很好的语法。

// "Int" to get rawValue, and Strideable so we can iterate
enum MyColorEnum: Int, Strideable {
    case Red
    case Green
    case Blue
    case Black

    // required by Strideable
    typealias Stride = Int

    func advanced(by n:Stride) -> MyColorEnum {
        var next = self.rawValue + n
        if next > MyColorEnum.Black.rawValue {
            next = MyColorEnum.Black.rawValue
        }
        return MyColorEnum(rawValue: next)!
    }

    func distance(to other: MyColorEnum) -> Int {
        return other.rawValue - self.rawValue
    }

    // just for printing
    func simpleDescription() -> String {
        switch self {
        case .Red: return "Red"
        case .Green: return "Green"
        case .Blue: return "Blue"
        case .Black: return "Black"
        }
    }
}

// this is how you use it:
for i in MyColorEnum.Red ... MyColorEnum.Black {
    print("ENUM: \(i)")
}

编辑: 快速进化提案SE-0194枚举案例派生集合为这个问题提出了一个水平的解决方案。我们在Swift 4.2和更新版本中看到了它。该提案还指出了一些变通方法，这些方法与这里已经提到的一些方法类似，但可能会很有趣。

为了完整起见，我也会保留我原来的职位。

这是基于@Peymmankh的回答的另一种方法，适用于Swift 3。

public protocol EnumCollection: Hashable {}

extension EnumCollection {

public static func allValues() -> [Self] {
    typealias S = Self

    let retVal = AnySequence { () -> AnyIterator<S> in
        var raw = 0
        return AnyIterator {
            let current = withUnsafePointer(to: &raw) {
                 $0.withMemoryRebound(to: S.self, capacity: 1) { $0.pointee }
            }
            guard current.hashValue == raw else { return nil }
            raw += 1
            return current
        }
    }

    return [S](retVal)
}

我添加了函数count()，并迭代值:

public enum MetricType: Int {
    case mvps = 0
    case allNBA = 1
    case championshipRings = 2
    case finalAppearances = 3
    case gamesPlayed = 4
    case ppg = 5

    static func count() -> Int {
        return (ppg.rawValue) + 1
    }

    static var allValues: [MetricType] {
        var array: [MetricType] = Array()
        var item : MetricType = MetricType.mvps
        while item.rawValue < MetricType.count() {
            array.append(item)
            item = MetricType(rawValue: (item.rawValue + 1))!
        }
    return array
    }
}

另一个解决方案:

enum Suit: String {
    case spades = "♠"
    case hearts = "♥"
    case diamonds = "♦"
    case clubs = "♣"

    static var count: Int {
        return 4   
    }

    init(index: Int) {
        switch index {
            case 0: self = .spades
            case 1: self = .hearts
            case 2: self = .diamonds
            default: self = .clubs
        }
    }
}

for i in 0..<Suit.count {
    print(Suit(index: i).rawValue)
}

我发现了一种有点俗气但更安全的方法，它不需要键入两次值或引用枚举值的内存，因此不太可能损坏。

基本上，与其使用枚举，不如创建一个具有单个实例的结构体，并将所有enum-values设置为常量。然后可以使用Mirror查询变量

public struct Suit{

    // the values
    let spades = "♠"
    let hearts = "♥"
    let diamonds = "♦"
    let clubs = "♣"

    // make a single instance of the Suit struct, Suit.instance
    struct SStruct{static var instance: Suit = Suit()}
    static var instance : Suit{
        get{return SStruct.instance}
        set{SStruct.instance = newValue}
    }

    // an array with all of the raw values
    static var allValues: [String]{
        var values = [String]()

        let mirror = Mirror(reflecting: Suit.instance)
        for (_, v) in mirror.children{
            guard let suit = v as? String else{continue}
            values.append(suit)
        }

        return values
    }
}

如果使用此方法，则需要使用Suit.instance.clubs或Suit.instance.spades来获取单个值

但所有这些都太无聊了……让我们做一些事情，使它更像一个真正的enum!

public struct SuitType{

    // store multiple things for each suit
    let spades = Suit("♠", order: 4)
    let hearts = Suit("♥", order: 3)
    let diamonds = Suit("♦", order: 2)
    let clubs = Suit("♣", order: 1)

    struct SStruct{static var instance: SuitType = SuitType()}
    static var instance : SuitType{
        get{return SStruct.instance}
        set{SStruct.instance = newValue}
    }

    // a dictionary mapping the raw values to the values
    static var allValuesDictionary: [String : Suit]{
        var values = [String : Suit]()

        let mirror = Mirror(reflecting: SuitType.instance)
        for (_, v) in mirror.children{
            guard let suit = v as? Suit else{continue}
            values[suit.rawValue] = suit
        }

        return values
    }
}

public struct Suit: RawRepresentable, Hashable{
    public var rawValue: String
    public typealias RawValue = String

    public var hashValue: Int{
        // find some integer that can be used to uniquely identify
        // each value. In this case, we could have used the order
        // variable because it is a unique value, yet to make this
        // apply to more cases, the hash table address of rawValue
        // will be returned, which should work in almost all cases
        // 
        // you could also add a hashValue parameter to init() and
        // give each suit a different hash value
        return rawValue.hash
    }

    public var order: Int
    public init(_ value: String, order: Int){
        self.rawValue = value
        self.order = order
    }

    // an array of all of the Suit values
    static var allValues: [Suit]{
        var values = [Suit]()

        let mirror = Mirror(reflecting: SuitType.instance)
        for (_, v) in mirror.children{
            guard let suit = v as? Suit else{continue}
            values.append(suit)
        }

        return values
    }

    // allows for using Suit(rawValue: "♦"), like a normal enum
    public init?(rawValue: String){
        // get the Suit from allValuesDictionary in SuitType, or return nil if that raw value doesn't exist
        guard let suit = SuitType.allValuesDictionary[rawValue] else{return nil}
        // initialize a new Suit with the same properties as that with the same raw value
        self.init(suit.rawValue, order: suit.order)
    }
}

你现在可以做

let allSuits: [Suit] = Suit.allValues

or

for suit in Suit.allValues{
   print("The suit \(suit.rawValue) has the order \(suit.order)")
}

然而，要获得一个单一，你仍然需要使用SuitType.instance.spades或SuitType.instance.hearts。为了更加直观，您可以向Suit添加一些允许您使用Suit.type的代码。*而不是SuitType.instance.*

public struct Suit: RawRepresentable, Hashable{
   // ...your code...

   static var type = SuitType.instance

   // ...more of your code...
}

您现在可以使用Suit.type.diamonds而不是SuitType.instance。diamonds，或者Suit.type.clubs而不是SuitType.instance.clubs

你可以试着像这样列举

enum Planet: String {
    case Mercury
    case Venus
    case Earth
    case Mars

    static var enumerate: [Planet] {
        var a: [Planet] = []
        switch Planet.Mercury {
            case .Mercury: a.append(.Mercury); fallthrough
            case .Venus: a.append(.Venus); fallthrough
            case .Earth: a.append(.Earth); fallthrough
            case .Mars: a.append(.Mars)
        }
    return a
    }
}

Planet.enumerate // [Mercury, Venus, Earth, Mars]

下面是我用来迭代枚举和从一个枚举提供多个值类型的方法

enum IterateEnum: Int {
    case Zero
    case One
    case Two
    case Three
    case Four
    case Five
    case Six
    case Seven

    //tuple allows multiple values to be derived from the enum case, and
    //since it is using a switch with no default, if a new case is added,
    //a compiler error will be returned if it doesn't have a value tuple set
    var value: (french: String, spanish: String, japanese: String) {
        switch self {
        case .Zero: return (french: "zéro", spanish: "cero", japanese: "nuru")
        case .One: return (french: "un", spanish: "uno", japanese: "ichi")
        case .Two: return (french: "deux", spanish: "dos", japanese: "ni")
        case .Three: return (french: "trois", spanish: "tres", japanese: "san")
        case .Four: return (french: "quatre", spanish: "cuatro", japanese: "shi")
        case .Five: return (french: "cinq", spanish: "cinco", japanese: "go")
        case .Six: return (french: "six", spanish: "seis", japanese: "roku")
        case .Seven: return (french: "sept", spanish: "siete", japanese: "shichi")
        }
    }

    //Used to iterate enum or otherwise access enum case by index order.
    //Iterate by looping until it returns nil
    static func item(index: Int) -> IterateEnum? {
        return IterateEnum.init(rawValue: index)
    }

    static func numberFromSpanish(number: String) -> IterateEnum? {
        return findItem { $0.value.spanish == number }
    }

    //use block to test value property to retrieve the enum case        
    static func findItem(predicate: ((_: IterateEnum) -> Bool)) -> IterateEnum? {

        var enumIndex: Int = -1
        var enumCase: IterateEnum?

        //Iterate until item returns nil
        repeat {
            enumIndex += 1
            enumCase = IterateEnum.item(index: enumIndex)

            if let eCase = enumCase {

                if predicate(eCase) {
                    return eCase
                }
            }
        } while enumCase != nil
        return nil
    }
}

var enumIndex: Int = -1
var enumCase: IterateEnum?

// Iterate until item returns nil
repeat {
    enumIndex += 1
    enumCase = IterateEnum.item(index: enumIndex)
    if let eCase = enumCase {
        print("The number \(eCase) in french: \(eCase.value.french), spanish: \(eCase.value.spanish), japanese: \(eCase.value.japanese)")
    }
} while enumCase != nil

print("Total of \(enumIndex) cases")

let number = IterateEnum.numberFromSpanish(number: "siete")

print("siete in japanese: \((number?.value.japanese ?? "Unknown"))")

输出如下:

法语中的数字Zero: zéro，西班牙语中的数字cero，日语中的数字nuru 数字一在法语中是un，西班牙语中是uno，日语中是ichi 法语中的数字2是deux，西班牙语中的数字2是dos，日语中的数字2是ni 法语中的“三”是“trois”，西班牙语中的“tres”，日语中的“san” 法语中的“四”是quatre，西班牙语中的“四”是cuatro，日语中的“四”是shi 数字五在法语中是cinq，西班牙语中是cinco，日语中是go 数字6在法语中是Six，西班牙语是seis，日语是roku 法语中的数字“七”是“sept”，西班牙语中的“siete”，日语中的“shichi”

共8例

Siete在日语中的意思是:shichi

更新

我最近创建了一个协议来处理枚举。该协议需要一个Int原始值的enum:

protocol EnumIteration {

    //Used to iterate enum or otherwise access enum case by index order. Iterate by looping until it returns nil

    static func item(index:Int) -> Self?
    static func iterate(item:((index:Int, enumCase:Self)->()), completion:(()->())?) {
    static func findItem(predicate:((enumCase:Self)->Bool)) -> Self?
    static func count() -> Int
}

extension EnumIteration where Self: RawRepresentable, Self.RawValue == Int {

    //Used to iterate enum or otherwise access enum case by index order. Iterate by looping until it returns nil
    static func item(index:Int) -> Self? {
        return Self.init(rawValue: index)
    }

    static func iterate(item:((index:Int, enumCase:Self)->()), completion:(()->())?) {

        var enumIndex:Int = -1
        var enumCase:Self?

        //Iterate until item returns nil
        repeat {
            enumIndex += 1
            enumCase = Self.item(enumIndex)

            if let eCase = enumCase {
                item(index: enumIndex, enumCase: eCase)
            }
        } while enumCase != nil
        completion?()
    }

    static func findItem(predicate:((enumCase:Self)->Bool)) -> Self? {

        var enumIndex:Int = -1
        var enumCase:Self?

        //Iterate until item returns nil
        repeat {
            enumIndex += 1
            enumCase = Self.item(enumIndex)

            if let eCase = enumCase {

                if predicate(enumCase:eCase) {
                    return eCase
                }
            }
        } while enumCase != nil
        return nil
    }

    static func count() -> Int {
        var enumIndex:Int = -1
        var enumCase:Self?

        //Iterate until item returns nil
        repeat {
            enumIndex += 1
            enumCase = Self.item(enumIndex)
        } while enumCase != nil

        //last enumIndex (when enumCase == nil) is equal to the enum count
        return enumIndex
    }
}

Swift 4 + 2。

从Swift 4.2 (Xcode 10)开始，只需将协议一致性添加到CaseIterable中，就可以从allCases中受益。要添加这个协议一致性，你只需要在某个地方写:

extension Suit: CaseIterable {}

如果枚举是你自己的，你可以直接在声明中指定一致性:

enum Suit: String, CaseIterable { case spades = "♠"; case hearts = "♥"; case diamonds = "♦"; case clubs = "♣" }

然后下面的代码将打印所有可能的值:

Suit.allCases.forEach {
    print($0.rawValue)
}

与早期Swift版本的兼容性(3。X和4.x)

如果您需要支持Swift 3。x或4.0，你可以通过添加以下代码来模仿Swift 4.2的实现:

#if !swift(>=4.2)
public protocol CaseIterable {
    associatedtype AllCases: Collection where AllCases.Element == Self
    static var allCases: AllCases { get }
}
extension CaseIterable where Self: Hashable {
    static var allCases: [Self] {
        return [Self](AnySequence { () -> AnyIterator<Self> in
            var raw = 0
            var first: Self?
            return AnyIterator {
                let current = withUnsafeBytes(of: &raw) { $0.load(as: Self.self) }
                if raw == 0 {
                    first = current
                } else if current == first {
                    return nil
                }
                raw += 1
                return current
            }
        })
    }
}
#endif

(改进Karthik Kumar的回答)

这个解决方案是使用编译器来保证你不会错过一个case。

enum Suit: String {
    case spades = "♠"
    case hearts = "♥"
    case diamonds = "♦"
    case clubs = "♣"

    static var enumerate: [Suit] {
        switch Suit.spades {
        // make sure the two lines are identical ^_^
        case        .spades, .hearts, .diamonds, .clubs:
            return [.spades, .hearts, .diamonds, .clubs]
        }
    }
}

Swift 5解决方案:

enum Suit: String, CaseIterable {
    case spades = "♠"
    case hearts = "♥"
    case diamonds = "♦"
    case clubs = "♣"
}

// access cases like this:

for suitKey in Suit.allCases {
    print(suitKey)
}

更新代码:Swift 4.2/Swift 5

enum Suit: String, CaseIterable {
   case spades = "♠"
   case hearts = "♥"
   case diamonds = "♦"
   case clubs = "♣"
}

按问题访问输出:

for suitKey in Suit.allCases {
    print(suitKey.rawValue)
}

输出:

♠
♥
♦
♣

CaseIterable:提供其所有值的集合。 符合CaseIterable协议的类型通常是没有关联值的枚举。当使用CaseIterable类型时，您可以通过使用该类型的allCases属性访问该类型的所有案例的集合。

对于访问case，我们使用。allcases。更多信息请点击https://developer.apple.com/documentation/swift/caseiterable