你需要像这样在while循环中封装try-catch: -

int count = 0;
int maxTries = 3;
while(true) {
    try {
        // Some Code
        // break out of loop, or return, on success
    } catch (SomeException e) {
        // handle exception
        if (++count == maxTries) throw e;
    }
}

我已经采取了count和maxTries，以避免运行到一个无限循环，以防异常继续发生在你的try块。

使用带有本地状态标志的while循环。初始化标志为false，并在操作成功时将其设置为true，如下所示:

  boolean success  = false;
  while(!success){
     try{ 
         some_instruction(); 
         success = true;
     } catch (NearlyUnexpectedException e){
       fix_the_problem();
     }
  }

这将不断重试，直到成功。

如果你只想重试一定次数，那么也可以使用计数器:

  boolean success  = false;
  int count = 0, MAX_TRIES = 10;
  while(!success && count++ < MAX_TRIES){
     try{ 
         some_instruction(); 
         success = true;
     } catch (NearlyUnexpectedException e){
       fix_the_problem();
     }
  }
  if(!success){
    //It wasn't successful after 10 retries
  }

这将尝试最多10次，如果不成功，直到那时将退出，如果它成功之前。

通常，最好的设计取决于特定的环境。通常我会这样写:

for (int retries = 0;; retries++) {
    try {
        return doSomething();
    } catch (SomeException e) {
        if (retries < 6) {
            continue;
        } else {
            throw e;
        }
    }
}

解决这个问题的一个简单方法是在while循环中包装try/catch并维护一个计数。通过这种方式，您可以根据其他变量检查计数，同时维护故障日志，从而防止出现无限循环。这不是最精致的解决方案，但它是可行的。

Try-Catch所做的就是允许程序优雅地失败。在catch语句中，通常尝试记录错误，如果需要，可能还会回滚更改。

bool finished = false;

while(finished == false)
{
    try
    {
        //your code here
        finished = true
    }
    catch(exception ex)
    {
        log.error("there was an error, ex");
    }
}

虽然try/catch into while是众所周知的好策略，我想建议你递归调用:

void retry(int i, int limit) {
    try {

    } catch (SomeException e) {
        // handle exception
        if (i >= limit) {
            throw e;  // variant: wrap the exception, e.g. throw new RuntimeException(e);
        }
        retry(i++, limit);
    }
}

这些答案基本上都是一样的。我的也是，但我喜欢这种形式

boolean completed = false;
Throwable lastException = null;
for (int tryCount=0; tryCount < config.MAX_SOME_OPERATION_RETRIES; tryCount++)
{
    try {
        completed = some_operation();
        break;
    }
    catch (UnlikelyException e) {
        lastException = e;
        fix_the_problem();
    }
}
if (!completed) {
    reportError(lastException);
}

强制性的“企业级”解决方案:

public abstract class Operation {
    abstract public void doIt();
    public void handleException(Exception cause) {
        //default impl: do nothing, log the exception, etc.
    }
}

public class OperationHelper {
    public static void doWithRetry(int maxAttempts, Operation operation) {
        for (int count = 0; count < maxAttempts; count++) {
            try {
                operation.doIt();
                count = maxAttempts; //don't retry
            } catch (Exception e) {
                operation.handleException(e);
            }
        }
    }
}

并呼吁:

OperationHelper.doWithRetry(5, new Operation() {
    @Override public void doIt() {
        //do some stuff
    }
    @Override public void handleException(Exception cause) {
        //recover from the Exception
    }
});

你可以从jcabi-aspect(我是一名开发人员)使用AOP和Java注释:

@RetryOnFailure(attempts = 3, delay = 5)
public String load(URL url) {
  return url.openConnection().getContent();
}

您还可以使用@Loggable和@LogException注释。

使用do-while设计重试块。

boolean successful = false;
int maxTries = 3;
do{
  try {
    something();
    success = true;
  } catch(Me ifUCan) {
    maxTries--;
  }
} while (!successful || maxTries > 0)

我知道这里已经有很多类似的答案，我的答案也没有太大不同，但我还是会把它贴出来，因为它涉及一个具体的案例/问题。

当你在PHP中处理facebook Graph API时，你有时会得到一个错误，但立即重新尝试同样的事情会得到一个积极的结果(由于各种神奇的互联网原因，超出了这个问题的范围)。在这种情况下，不需要修复任何错误，而是简单地再试一次，因为有某种“facebook错误”。

这段代码在创建facebook会话后立即使用:

//try more than once because sometimes "facebook error"
$attempt = 3;
while($attempt-- > 0)
{
    // To validate the session:
    try 
    {
        $facebook_session->validate();
        $attempt = 0;
    } 
    catch (Facebook\FacebookRequestException $ex)
    {
        // Session not valid, Graph API returned an exception with the reason.
        if($attempt <= 0){ echo $ex->getMessage(); }
    } 
    catch (\Exception $ex) 
    {
        // Graph API returned info, but it may mismatch the current app or have expired.
        if($attempt <= 0){ echo $ex->getMessage(); }
    }
}

此外，通过让for循环计数为零($attempt——)，可以很容易地改变将来的尝试次数。

以下是我的解决方案，非常简单的方法!

               while (true) {
                    try {
                        /// Statement what may cause an error;
                        break;
                    } catch (Exception e) {

                    }
                }

如果它是有用的，可以考虑更多的选项，所有放在一起(停止文件而不是重试，睡眠，继续更大的循环)都可能有帮助。

 bigLoop:
 while(!stopFileExists()) {
    try {
      // do work
      break;
    }
    catch (ExpectedExceptionType e) {

       // could sleep in here, too.

       // another option would be to "restart" some bigger loop, like
       continue bigLoop;
    }
    // ... more work
}

我不确定这是否是“专业”的方式来做这件事，我不完全确定它是否适用于所有事情。

boolean gotError = false;

do {
    try {
        // Code You're Trying
    } catch ( FileNotFoundException ex ) {
        // Exception
        gotError = true;
    }
} while ( gotError = true );

https://github.com/tusharmndr/retry-function-wrapper/tree/master/src/main/java/io

int MAX_RETRY = 3; 
RetryUtil.<Boolean>retry(MAX_RETRY,() -> {
    //Function to retry
    return true;
});

下面是Java 8+的可重用和更通用的方法，不需要外部库:

public interface IUnreliable<T extends Exception>
{
    void tryRun ( ) throws T;
}

public static <T extends Exception> void retry (int retryCount, IUnreliable<T> runnable) throws T {
    for (int retries = 0;; retries++) {
        try {
            runnable.tryRun();
            return;
        } catch (Exception e) {
            if (retries < retryCount) {
                continue;
            } else {
                throw e;
            }
        }
    }
}

用法:

@Test
public void demo() throws IOException {
    retry(3, () -> {
        new File("/tmp/test.txt").createNewFile();
    });
}

你可以使用https://github.com/bnsd55/RetryCatch

例子:

RetryCatch retryCatchSyncRunnable = new RetryCatch();
        retryCatchSyncRunnable
                // For infinite retry times, just remove this row
                .retryCount(3)
                // For retrying on all exceptions, just remove this row
                .retryOn(ArithmeticException.class, IndexOutOfBoundsException.class)
                .onSuccess(() -> System.out.println("Success, There is no result because this is a runnable."))
                .onRetry((retryCount, e) -> System.out.println("Retry count: " + retryCount + ", Exception message: " + e.getMessage()))
                .onFailure(e -> System.out.println("Failure: Exception message: " + e.getMessage()))
                .run(new ExampleRunnable());

你可以传递自己的匿名函数，而不是新的ExampleRunnable()。

其余解决方案的问题是，对应的函数在没有时间间隔的情况下连续尝试，从而溢出堆栈。

为什么不一刻不停地尝试呢?

这里有一个使用setTimeout和递归函数的解决方案:

(function(){ try{ Run(); //tries for the 1st time, but Run() as function is not yet defined } catch(e){ (function retry(){ setTimeout(function(){ try{ console.log("trying..."); Run(); console.log("success!"); } catch(e){ retry(); //calls recursively } }, 1000); //tries every second }()); } })(); //after 5 seconds, defines Run as a global function var Run; setTimeout(function(){ Run = function(){}; }, 5000);

将函数Run()替换为希望每秒重试的函数或代码。

Spring AOP和基于注释的解决方案:

用法(@RetryOperation是作业的自定义注释):

@RetryOperation(retryCount = 1, waitSeconds = 10)
boolean someMethod() throws Exception {
}

要做到这一点，我们需要做两件事:1。注释接口;一个春天的方面。下面是实现这些的一种方法:

标注接口:

import java.lang.annotation.*;

@Target(ElementType.METHOD)
@Retention(RetentionPolicy.RUNTIME)
public @interface RetryOperation {
    int retryCount();
    int waitSeconds();
}

春季相位:

import org.aspectj.lang.ProceedingJoinPoint;
import org.aspectj.lang.annotation.Around;
import org.aspectj.lang.annotation.Aspect;
import org.aspectj.lang.reflect.MethodSignature;
import org.slf4j.Logger;
import org.slf4j.LoggerFactory;
import org.springframework.stereotype.Component;
import java.lang.reflect.Method;

@Aspect @Component 
public class RetryAspect {

    private static final Logger LOGGER = LoggerFactory.getLogger(RetryAspect.class);

    @Around(value = "@annotation(RetryOperation)")
    public Object retryOperation(ProceedingJoinPoint joinPoint) throws Throwable {

        Object response = null;
        Method method = ((MethodSignature) joinPoint.getSignature()).getMethod();
        RetryOperation annotation = method.getAnnotation(RetryOperation.class);
        int retryCount = annotation.retryCount();
        int waitSeconds = annotation.waitSeconds();
        boolean successful = false;

        do {
            try {
                response = joinPoint.proceed();
                successful = true;
            } catch (Exception ex) {
                LOGGER.info("Operation failed, retries remaining: {}", retryCount);
                retryCount--;
                if (retryCount < 0) {
                    throw ex;
                }
                if (waitSeconds > 0) {
                    LOGGER.info("Waiting for {} second(s) before next retry", waitSeconds);
                    Thread.sleep(waitSeconds * 1000l);
                }
            }
        } while (!successful);

        return response;
    }
}

这是一个老问题，但解决方案仍然重要。以下是我在Java 8中不使用任何第三方库的通用解决方案:

public interface RetryConsumer<T> {
    T evaluate() throws Throwable;
}
public interface RetryPredicate<T> {
    boolean shouldRetry(T t);
}
public class RetryOperation<T> {
    private RetryConsumer<T> retryConsumer;
    private int noOfRetry;
    private int delayInterval;
    private TimeUnit timeUnit;
    private RetryPredicate<T> retryPredicate;
    private List<Class<? extends Throwable>> exceptionList;

    public static class OperationBuilder<T> {
        private RetryConsumer<T> iRetryConsumer;
        private int iNoOfRetry;
        private int iDelayInterval;
        private TimeUnit iTimeUnit;
        private RetryPredicate<T> iRetryPredicate;
        private Class<? extends Throwable>[] exceptionClasses;

        private OperationBuilder() {
        }

        public OperationBuilder<T> retryConsumer(final RetryConsumer<T> retryConsumer) {
            this.iRetryConsumer = retryConsumer;
            return this;
        }

        public OperationBuilder<T> noOfRetry(final int noOfRetry) {
            this.iNoOfRetry = noOfRetry;
            return this;
        }

        public OperationBuilder<T> delayInterval(final int delayInterval, final TimeUnit timeUnit) {
            this.iDelayInterval = delayInterval;
            this.iTimeUnit = timeUnit;
            return this;
        }

        public OperationBuilder<T> retryPredicate(final RetryPredicate<T> retryPredicate) {
            this.iRetryPredicate = retryPredicate;
            return this;
        }

        @SafeVarargs
        public final OperationBuilder<T> retryOn(final Class<? extends Throwable>... exceptionClasses) {
            this.exceptionClasses = exceptionClasses;
            return this;
        }

        public RetryOperation<T> build() {
            if (Objects.isNull(iRetryConsumer)) {
                throw new RuntimeException("'#retryConsumer:RetryConsumer<T>' not set");
            }

            List<Class<? extends Throwable>> exceptionList = new ArrayList<>();
            if (Objects.nonNull(exceptionClasses) && exceptionClasses.length > 0) {
                exceptionList = Arrays.asList(exceptionClasses);
            }
            iNoOfRetry = iNoOfRetry == 0 ? 1 : 0;
            iTimeUnit = Objects.isNull(iTimeUnit) ? TimeUnit.MILLISECONDS : iTimeUnit;
            return new RetryOperation<>(iRetryConsumer, iNoOfRetry, iDelayInterval, iTimeUnit, iRetryPredicate, exceptionList);
        }
    }

    public static <T> OperationBuilder<T> newBuilder() {
        return new OperationBuilder<>();
    }

    private RetryOperation(RetryConsumer<T> retryConsumer, int noOfRetry, int delayInterval, TimeUnit timeUnit,
                           RetryPredicate<T> retryPredicate, List<Class<? extends Throwable>> exceptionList) {
        this.retryConsumer = retryConsumer;
        this.noOfRetry = noOfRetry;
        this.delayInterval = delayInterval;
        this.timeUnit = timeUnit;
        this.retryPredicate = retryPredicate;
        this.exceptionList = exceptionList;
    }

    public T retry() throws Throwable {
        T result = null;
        int retries = 0;
        while (retries < noOfRetry) {
            try {
                result = retryConsumer.evaluate();
                if (Objects.nonNull(retryPredicate)) {
                    boolean shouldItRetry = retryPredicate.shouldRetry(result);
                    if (shouldItRetry) {
                        retries = increaseRetryCountAndSleep(retries);
                    } else {
                        return result;
                    }
                } else {
                    // no retry condition defined, no exception thrown. This is the desired result.
                    return result;
                }
            } catch (Throwable e) {
                retries = handleException(retries, e);
            }
        }
        return result;
    }

    private int handleException(int retries, Throwable e) throws Throwable {
        if (exceptionList.contains(e.getClass()) || (exceptionList.isEmpty())) {
            // exception is excepted, continue retry.
            retries = increaseRetryCountAndSleep(retries);
            if (retries == noOfRetry) {
                // evaluation is throwing exception, no more retry left. Throw it.
                throw e;
            }
        } else {
            // unexpected exception, no retry required. Throw it.
            throw e;
        }
        return retries;
    }

    private int increaseRetryCountAndSleep(int retries) {
        retries++;
        if (retries < noOfRetry && delayInterval > 0) {
            try {
                timeUnit.sleep(delayInterval);
            } catch (InterruptedException ignore) {
                Thread.currentThread().interrupt();
            }
        }
        return retries;
    }
}

让我们有一个这样的测试用例:

@Test
public void withPredicateAndException() {
    AtomicInteger integer = new AtomicInteger();
    try {
        Integer result = RetryOperation.<Integer>newBuilder()
                .retryConsumer(() -> {
                    int i = integer.incrementAndGet();
                    if (i % 2 == 1) {
                        throw new NumberFormatException("Very odd exception");
                    } else {
                        return i;
                    }
                })
                .noOfRetry(10)
                .delayInterval(10, TimeUnit.MILLISECONDS)
                .retryPredicate(value -> value <= 6)
                .retryOn(NumberFormatException.class, EOFException.class)
                .build()
                .retry();
        Assert.assertEquals(8, result.intValue());
    } catch (Throwable throwable) {
        Assert.fail();
    }
}

如果不是所有异常都需要重试，那么只有一些例外。如果至少要尝试一次，这里有一个替代的实用方法:

void runWithRetry(Runnable runnable, Class<Exception> exClass, int maxRetries) {
        Exception err = null;
        do {
            maxRetries--;
            try {
                runnable.run();
                err = null;
            } catch (Exception e) {
                if(exClass.isAssignableFrom(e.getClass())){
                    err = e;
                }else {
                    throw e;
                }
            }
        } while (err != null && maxRetries > 0);

        if (err != null) {
            throw err;
        }
    }

用法:

    runWithRetry(() -> {
       // do something
    }, TimeoutException.class, 5)

尝试使用spring @Retryable注解，当RuntimeException发生时，下面的方法将重试3次

@Retryable(maxAttempts=3,value= {RuntimeException.class},backoff = @Backoff(delay = 500))
public void checkSpringRetry(String str) {
    if(StringUtils.equalsIgnoreCase(str, "R")) {
        LOGGER.info("Inside retry.....!!");
        throw new RuntimeException();
    }
}

下面的代码段执行一些代码段。如果在执行代码段时出现任何错误，请休眠M毫秒并重试。参考链接。

public void retryAndExecuteErrorProneCode(int noOfTimesToRetry, CodeSnippet codeSnippet, int sleepTimeInMillis)
  throws InterruptedException {

 int currentExecutionCount = 0;
 boolean codeExecuted = false;

 while (currentExecutionCount < noOfTimesToRetry) {
  try {
   codeSnippet.errorProneCode();
   System.out.println("Code executed successfully!!!!");
   codeExecuted = true;
   break;
  } catch (Exception e) {
   // Retry after 100 milliseconds
   TimeUnit.MILLISECONDS.sleep(sleepTimeInMillis);
   System.out.println(e.getMessage());
  } finally {
   currentExecutionCount++;
  }
 }

 if (!codeExecuted)
  throw new RuntimeException("Can't execute the code within given retries : " + noOfTimesToRetry);
}

这里是我的解决方案类似于其他人可以包装一个函数，但允许您获得函数返回值，如果它成功。

    /**
     * Wraps a function with retry logic allowing exceptions to be caught and retires made.
     *
     * @param function the function to retry
     * @param maxRetries maximum number of retires before failing
     * @param delay time to wait between each retry
     * @param allowedExceptionTypes exception types where if caught a retry will be performed
     * @param <V> return type of the function
     * @return the value returned by the function if successful
     * @throws Exception Either an unexpected exception from the function or a {@link RuntimeException} if maxRetries is exceeded
     */
    @SafeVarargs
    public static <V> V runWithRetriesAndDelay(Callable<V> function, int maxRetries, Duration delay, Class<? extends Exception>... allowedExceptionTypes) throws Exception {
        final Set<Class<? extends Exception>> exceptions = new HashSet<>(Arrays.asList(allowedExceptionTypes));
        for(int i = 1; i <= maxRetries; i++) {
            try {
                return function.call();
            } catch (Exception e) {
                if(exceptions.contains(e.getClass())){
                    // An exception of an expected type
                    System.out.println("Attempt [" + i + "/" + maxRetries + "] Caught exception [" + e.getClass() + "]");
                    // Pause for the delay time
                    Thread.sleep(delay.toMillis());
                }else {
                    // An unexpected exception type
                    throw e;
                }
            }
        }
        throw new RuntimeException(maxRetries + " retries exceeded");
    }

将@ach之前的解决方案简化为一个文件，并使用功能接口。

public class OperationHelper {

    public static void doWithRetry(int maxAttempts, Runnable operation, Consumer<Exception> handle) {
        for (int count = 0; count < maxAttempts; count++) {
            try {
                operation.run();
                count = maxAttempts; //don't retry
            } catch (Exception e) {
                handle.accept(e);
            }
        }
    }
}

简单的

int MAX = 3;

int count = 0;
while (true) {
    try {
        ...

        break;
    } catch (Exception e) {
        if (count++ < MAX) {
            continue;
        }

        ...
        
        break;
    }
}

https://onlinegdb.com/a-7RsL1Gh

    public void doSomething() throws Exception{
      final int MAX_TRIES = 10;
      int count = 0;
      
      while(count++ < MAX_TRIES){
         try{ 
            System.out.println("trying");
            causeIssue(count); // throws error/exception till count 2
            System.out.println("trying successful");
            break; // break on success
         } catch (Exception e){
           System.out.println("caught, logging Exception:" + count);
         } catch (Error e){
           System.out.println("caught, logging Error:" + count);
         }
      }
    }

输出:

trying
caught, logging Error:1
trying
caught, logging Error:2
trying
trying successful

此解决方案允许您配置一个可重用的功能，以便在不使用任何外部库的情况下基于特定异常进行重试

//创建一个适合你需要的函数。

@FunctionalInterface
public interface ThrowableBiFunction<U,T,R> {
    R apply(U u ,T t) throws Exception;
}

//这是解决方案的关键

public interface ExceptionRetryable<T, U, R> {
    
 int getRetries();
   
 List<Class<? extends Exception>> getRetryableExceptions();

    default R execute(ThrowableBiFunction<T, U, R> function, T t, U u) throws Exception {
        int numberOfRetries = getRetries();
        return execute(function, t, u, numberOfRetries);
    }

    default R execute(ThrowableBiFunction<T, U, R> function, T t, U u, int retryCount) throws Exception {
        try {
            log.info(" Attempting to execute ExceptionRetryable#execute ,Number of remaining retries {} ",retryCount);
            return function.apply(t, u);
        } catch (Exception e) {

           log.info(" error occurred in ExceptionRetryable#execute",e);
            if (retryCount == 0)
                throw e;
            for (Class exp : getRetryableExceptions()) {
                if (e.getClass() == exp) {
                   return execute(function, t, u, retryCount - 1);
                }
            }
            throw e;
        }

    }
}

//创建一个异常可重执行的实现

public class TestRetryable implements ExceptionRetryable<String, String, List<String>> {
    @Override
    public int getRetries() {
        return 10;
    }

    @Override
    public List<Class<? extends Exception>> getRetryableExceptions() {
        return Arrays.asList(new Exception1().getClass(), new Exception2().getClass());
        ;
    }
}

//最后创建一个throwablebiffunction，它封装了需要在exception上重试的代码段和ExceptionRetryable实例

 TestRetryable retryable = new TestRetryable();
    ThrowableBiFunction<Integer,Long, String> testRetrablefcn = { i, l ->
           // your code goes here
};
    Integer i = 0;
    Long l = 1l;
      String output = testRetrablefcn.execute(testRetrablefcn,i,l); 

生产就绪代码:

@FunctionalInterface
public interface Operation {

    void doCall() throws IOException;

    default void handleException(Exception e) {
      //Your custom default implementation     
    }


public class OperationHelper {
    public static void doWithRetry(int maxAttempts, Operation operation) {

        for (int count = 0; count <= maxAttempts; count++) {
            try {
                operation.doCall();
                return;
            } catch (Exception e) {
                if (count == maxAttempts) {
                    e.printStackTrace();
                    return;
                } else {
                    operation.handleException(e);
                }
            }
        }
    }
}

在代码中使用默认实现:

OperationHelper.doWithRetry(10,
() -> //do your job );

当需要自定义异常句柄时使用:

OperationHelper.doWithRetry(10, new Operation() {
    @Override public void doIt() {
        //do some stuff
    }
    @Override public void handleException(Exception cause) {
        //recover from the Exception
    }
});