维基百科上关于HSL和HSV的文章包含了一些公式。计算有点棘手，所以看一下现有的实现可能会有用。

找到了最简单的方法，蟒蛇来拯救:D

colorsys。Hls_to_rgb (h, l, s) 将颜色从HLS坐标转换为RGB坐标。

Garry Tan在他的博客上发布了一个Javascript解决方案(他把它归为现已不存在的mjijackson.com，但存档在这里，原作者有一个要点——感谢user2441511)。

代码重新发布如下:

HSL到RGB:

/**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes h, s, and l are contained in the set [0, 1] and
 * returns r, g, and b in the set [0, 255].
 *
 * @param   {number}  h       The hue
 * @param   {number}  s       The saturation
 * @param   {number}  l       The lightness
 * @return  {Array}           The RGB representation
 */
function hslToRgb(h, s, l){
    var r, g, b;

    if(s == 0){
        r = g = b = l; // achromatic
    }else{
        var hue2rgb = function hue2rgb(p, q, t){
            if(t < 0) t += 1;
            if(t > 1) t -= 1;
            if(t < 1/6) return p + (q - p) * 6 * t;
            if(t < 1/2) return q;
            if(t < 2/3) return p + (q - p) * (2/3 - t) * 6;
            return p;
        }

        var q = l < 0.5 ? l * (1 + s) : l + s - l * s;
        var p = 2 * l - q;
        r = hue2rgb(p, q, h + 1/3);
        g = hue2rgb(p, q, h);
        b = hue2rgb(p, q, h - 1/3);
    }

    return [Math.round(r * 255), Math.round(g * 255), Math.round(b * 255)];
}

RGB转HSL:

/**
 * Converts an RGB color value to HSL. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes r, g, and b are contained in the set [0, 255] and
 * returns h, s, and l in the set [0, 1].
 *
 * @param   {number}  r       The red color value
 * @param   {number}  g       The green color value
 * @param   {number}  b       The blue color value
 * @return  {Array}           The HSL representation
 */
function rgbToHsl(r, g, b){
    r /= 255, g /= 255, b /= 255;
    var max = Math.max(r, g, b), min = Math.min(r, g, b);
    var h, s, l = (max + min) / 2;

    if(max == min){
        h = s = 0; // achromatic
    }else{
        var d = max - min;
        s = l > 0.5 ? d / (2 - max - min) : d / (max + min);
        switch(max){
            case r: h = (g - b) / d + (g < b ? 6 : 0); break;
            case g: h = (b - r) / d + 2; break;
            case b: h = (r - g) / d + 4; break;
        }
        h /= 6;
    }

    return [h, s, l];
}

H, S, L在[0,1]范围内:

ConvertHslToRgb: function (iHsl)
{
    var min, sv, sextant, fract, vsf;

    var v = (iHsl.l <= 0.5) ? (iHsl.l * (1 + iHsl.s)) : (iHsl.l + iHsl.s - iHsl.l * iHsl.s);
    if (v === 0)
        return { Red: 0, Green: 0, Blue: 0 };

    min = 2 * iHsl.l - v;
    sv = (v - min) / v;
    var h = (6 * iHsl.h) % 6;
    sextant = Math.floor(h);
    fract = h - sextant;
    vsf = v * sv * fract;

    switch (sextant)
    {
        case 0: return { r: v, g: min + vsf, b: min };
        case 1: return { r: v - vsf, g: v, b: min };
        case 2: return { r: min, g: v, b: min + vsf };
        case 3: return { r: min, g: v - vsf, b: v };
        case 4: return { r: min + vsf, g: min, b: v };
        case 5: return { r: v, g: min, b: v - vsf };
    }
}

如果你正在寻找一些完全符合HSL和RGB的CSS语义的东西，你可以使用css3规范中指定的算法，它如下:

HOW TO RETURN hsl.to.rgb(h, s, l): 
   SELECT: 
      l<=0.5: PUT l*(s+1) IN m2
      ELSE: PUT l+s-l*s IN m2
   PUT l*2-m2 IN m1
   PUT hue.to.rgb(m1, m2, h+1/3) IN r
   PUT hue.to.rgb(m1, m2, h    ) IN g
   PUT hue.to.rgb(m1, m2, h-1/3) IN b
   RETURN (r, g, b)

HOW TO RETURN hue.to.rgb(m1, m2, h): 
   IF h<0: PUT h+1 IN h
   IF h>1: PUT h-1 IN h
   IF h*6<1: RETURN m1+(m2-m1)*h*6
   IF h*2<1: RETURN m2
   IF h*3<2: RETURN m1+(m2-m1)*(2/3-h)*6
   RETURN m1

我相信这是这里其他一些答案的来源。

来自Mohsen回答的c#代码。

下面是Mohsen用c#编写的答案代码，如果有人想要的话。注意:Color是自定义类，Vector4来自OpenTK。两者都很容易被你选择的其他东西取代。

Hsl到Rgba

/// <summary>
/// Converts an HSL color value to RGB.
/// Input: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )
/// Output: Color ( R: [0, 255], G: [0, 255], B: [0, 255], A: [0, 255] )
/// </summary>
/// <param name="hsl">Vector4 defining X = h, Y = s, Z = l, W = a. Ranges [0, 1.0]</param>
/// <returns>RGBA Color. Ranges [0, 255]</returns>
public static Color HslToRgba(Vector4 hsl)
{
    float r, g, b;

    if (hsl.Y == 0.0f)
        r = g = b = hsl.Z;

    else
    {
        var q = hsl.Z < 0.5f ? hsl.Z * (1.0f + hsl.Y) : hsl.Z + hsl.Y - hsl.Z * hsl.Y;
        var p = 2.0f * hsl.Z - q;
        r = HueToRgb(p, q, hsl.X + 1.0f / 3.0f);
        g = HueToRgb(p, q, hsl.X);
        b = HueToRgb(p, q, hsl.X - 1.0f / 3.0f);
    }

    return new Color((int)(r * 255), (int)(g * 255), (int)(b * 255), (int)(hsl.W * 255));
}

// Helper for HslToRgba
private static float HueToRgb(float p, float q, float t)
{
    if (t < 0.0f) t += 1.0f;
    if (t > 1.0f) t -= 1.0f;
    if (t < 1.0f / 6.0f) return p + (q - p) * 6.0f * t;
    if (t < 1.0f / 2.0f) return q;
    if (t < 2.0f / 3.0f) return p + (q - p) * (2.0f / 3.0f - t) * 6.0f;
    return p;
}

Rgba到Hsl

/// <summary>
/// Converts an RGB color value to HSL.
/// Input: Color ( R: [0, 255], G: [0, 255], B: [0, 255], A: [0, 255] )
/// Output: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )
/// </summary>
/// <param name="rgba"></param>
/// <returns></returns>
public static Vector4 RgbaToHsl(Color rgba)
{
    float r = rgba.R / 255.0f;
    float g = rgba.G / 255.0f;
    float b = rgba.B / 255.0f;

    float max = (r > g && r > b) ? r : (g > b) ? g : b;
    float min = (r < g && r < b) ? r : (g < b) ? g : b;

    float h, s, l;
    h = s = l = (max + min) / 2.0f;

    if (max == min)
        h = s = 0.0f;

    else
    {
        float d = max - min;
        s = (l > 0.5f) ? d / (2.0f - max - min) : d / (max + min);

        if (r > g && r > b)
            h = (g - b) / d + (g < b ? 6.0f : 0.0f);

        else if (g > b)
            h = (b - r) / d + 2.0f;

        else
            h = (r - g) / d + 4.0f;

        h /= 6.0f;
    }

    return new Vector4(h, s, l, rgba.A / 255.0f);
}

当你需要RGB到HSV，反之亦然:

function rgbToHsv(r, g, b)
{
    r /= 255, g /= 255, b /= 255;

    var min = Math.min(r, g, b),
    max = Math.max(r, g, b),
    delta = max - min,
    h = 0, s = 0, v = max;

    if (min != max)
    {
        s = (delta / max);

        switch (max)
        {
            case r: h = (g - b) / delta + (g < b ? 6 : 0); break;
            case g: h = (b - r) / delta + 2; break;
            case b: h = (r - g) / delta + 4; break;
        }

        h /= 6;
    }

    return [h, s, v];
}

function hsvToRgb(h, s, v)
{
    var step = h / (1 / 6),
    pos = step - Math.floor(step), // the hue position within the current step
    m = (Math.floor(step) % 2) ? (1 - pos) * v : pos * v, // mix color value adjusted to the brightness(v)
    max = 1 * v,
    min = (1 - s) * v,
    med = m + ((1 - s) * (v - m)),
    r, g, b;

    switch (Math.floor(step))
    {
        case 0:
            r = max;
            g = med;
            b = min;
            break;
        case 1:
            r = med;
            g = max;
            b = min;
            break;
        case 2:
            r = min;
            g = max;
            b = med;
            break;
        case 3:
            r = min;
            g = med;
            b = max;
            break;
        case 4:
            r = med;
            g = min;
            b = max;
            break;
        case 5:
            r = max;
            g = min;
            b = med;
            break;
    }

    return [Math.round(r * 255), Math.round(g * 255), Math.round(b * 255)];
}

我是这样做的，这很容易记住，把RGB想象成一个轮子上的三条辐条，相隔120度。

H = hue (0-360)
S = saturation (0-1)
L = luminance (0-1)

R1 = SIN( H ) * L 
G1 = SIN( H + 120 ) * L 
B1 = SIN( H + 240 ) * L 

棘手的部分是饱和度，即缩小到这三者的平均值。

AVERAGE = (R1 + G1 + B1) / 3 

R2 = ((R1 - AVERAGE) * S) + AVERAGE 
G2 = ((G1 - AVERAGE) * S) + AVERAGE 
B2 = ((B1 - AVERAGE) * S) + AVERAGE 

RED = R2 * 255 
GREEN = G2 * 255 
BLUE = B2 * 255 

这里是修改后的javascript函数，它在0-360度集输出Hue。

function rgbToHsl(r, g, b) {
      r /= 255, g /= 255, b /= 255;
      var max = Math.max(r, g, b), min = Math.min(r, g, b);
      var h, s, l = (max + min) / 2;

      if(max == min){
          h = s = 0; // achromatic
      } else {
          var d = max - min;
          s = l > 0.5 ? d / (2 - max - min) : d / (max + min);
          switch(max){
              case r: h = (g - b) / d ; break;
              case g: h = 2 + ( (b - r) / d); break;
              case b: h = 4 + ( (r - g) / d); break;
          }
          h*=60;
          if (h < 0) h +=360;
      }
     return([h, s, l]);
  }  
alert(rgbToHsl(125,115,145));

Mohsen代码的Java实现

注意，所有整数都声明为浮点数(即1f)，必须是浮点数，否则您将选择灰色。

HSL到RGB

 /**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes h, s, and l are contained in the set [0, 1] and
 * returns r, g, and b in the set [0, 255].
 *
 * @param h       The hue
 * @param s       The saturation
 * @param l       The lightness
 * @return int array, the RGB representation
 */
public static int[] hslToRgb(float h, float s, float l){
    float r, g, b;

    if (s == 0f) {
        r = g = b = l; // achromatic
    } else {
        float q = l < 0.5f ? l * (1 + s) : l + s - l * s;
        float p = 2 * l - q;
        r = hueToRgb(p, q, h + 1f/3f);
        g = hueToRgb(p, q, h);
        b = hueToRgb(p, q, h - 1f/3f);
    }
    int[] rgb = {to255(r), to255(g), to255(b)};
    return rgb;
}
public static int to255(float v) { return (int)Math.min(255,256*v); }

/** Helper method that converts hue to rgb */
public static float hueToRgb(float p, float q, float t) {
    if (t < 0f)
        t += 1f;
    if (t > 1f)
        t -= 1f;
    if (t < 1f/6f)
        return p + (q - p) * 6f * t;
    if (t < 1f/2f)
        return q;
    if (t < 2f/3f)
        return p + (q - p) * (2f/3f - t) * 6f;
    return p;
}

RGB到HSL

/**
 * Converts an RGB color value to HSL. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes pR, pG, and bpBare contained in the set [0, 255] and
 * returns h, s, and l in the set [0, 1].
 *
 * @param pR       The red color value
 * @param pG       The green color value
 * @param pB       The blue color value
 * @return float array, the HSL representation
 */
public static float[] rgbToHsl(int pR, int pG, int pB) {
    float r = pR / 255f;
    float g = pG / 255f;
    float b = pB / 255f;

    float max = (r > g && r > b) ? r : (g > b) ? g : b;
    float min = (r < g && r < b) ? r : (g < b) ? g : b;

    float h, s, l;
    l = (max + min) / 2.0f;

    if (max == min) {
        h = s = 0.0f;
    } else {
        float d = max - min;
        s = (l > 0.5f) ? d / (2.0f - max - min) : d / (max + min);

        if (r > g && r > b)
            h = (g - b) / d + (g < b ? 6.0f : 0.0f);

        else if (g > b)
            h = (b - r) / d + 2.0f;

        else
            h = (r - g) / d + 4.0f;

        h /= 6.0f;
    }

    float[] hsl = {h, s, l};
    return hsl;
}

Unity3D c#代码来自Mohsen的回答。

以下是Mohsen用c#编写的针对Unity3D的回答。它改编自上面Alec Thilenius给出的c#答案。

using UnityEngine;
using System.Collections;

public class ColorTools {

    /// <summary>
    /// Converts an HSL color value to RGB.
    /// Input: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )**strong text**
    /// Output: Color ( R: [0.0, 1.0], G: [0.0, 1.0], B: [0.0, 1.0], A: [0.0, 1.0] )
    /// </summary>
    /// <param name="hsl">Vector4 defining X = h, Y = s, Z = l, W = a. Ranges [0, 1.0]</param>
    /// <returns>RGBA Color. Ranges [0.0, 1.0]</returns>
    public static Color HslToRgba(Vector4 hsl)
    {
        float r, g, b;

        if (hsl.y == 0.0f)
            r = g = b = hsl.z;
        else
        {
            var q = hsl.z < 0.5f ? hsl.z * (1.0f + hsl.y) : hsl.z + hsl.y - hsl.z * hsl.y;
            var p = 2.0f * hsl.z - q;
            r = HueToRgb(p, q, hsl.x + 1.0f / 3.0f);
            g = HueToRgb(p, q, hsl.x);
            b = HueToRgb(p, q, hsl.x - 1.0f / 3.0f);
        }

        return new Color(r, g, b, hsl.w);
    }

    // Helper for HslToRgba
    private static float HueToRgb(float p, float q, float t)
    {
        if (t < 0.0f) t += 1.0f;
        if (t > 1.0f) t -= 1.0f;
        if (t < 1.0f / 6.0f) return p + (q - p) * 6.0f * t;
        if (t < 1.0f / 2.0f) return q;
        if (t < 2.0f / 3.0f) return p + (q - p) * (2.0f / 3.0f - t) * 6.0f;
        return p;
    }

    /// <summary>
    /// Converts an RGB color value to HSL.
    /// Input: Color ( R: [0.0, 1.0], G: [0.0, 1.0], B: [0.0, 1.0], A: [0.0, 1.0] )
    /// Output: Vector4 ( X: [0.0, 1.0], Y: [0.0, 1.0], Z: [0.0, 1.0], W: [0.0, 1.0] )
    /// </summary>
    /// <param name="rgba"></param>
    /// <returns></returns>
    public static Vector4 RgbaToHsl(Color rgba)
    {

        float max = (rgba.r > rgba.g && rgba.r > rgba.b) ? rgba.r : 
            (rgba.g > rgba.b) ? rgba.g : rgba.b;
        float min = (rgba.r < rgba.g && rgba.r < rgba.b) ? rgba.r : 
            (rgba.g < rgba.b) ? rgba.g : rgba.b;

        float h, s, l;
        h = s = l = (max + min) / 2.0f;

        if (max == min)
            h = s = 0.0f;
        else
        {
            float d = max - min;
            s = (l > 0.5f) ? d / (2.0f - max - min) : d / (max + min);

            if (rgba.r > rgba.g && rgba.r > rgba.b)
                h = (rgba.g - rgba.b) / d + (rgba.g < rgba.b ? 6.0f : 0.0f);

            else if (rgba.g > rgba.b)
                h = (rgba.b - rgba.r) / d + 2.0f;

            else
                h = (rgba.r - rgba.g) / d + 4.0f;

            h /= 6.0f;
        }

        return new Vector4(h, s, l, rgba.a);
    }

}

我需要一个非常轻的重量，它不是100%，但它足够接近一些用例。

float3 Hue(float h, float s, float l)
{
    float r = max(cos(h * 2 * UNITY_PI) * 0.5 + 0.5, 0);
    float g = max(cos((h + 0.666666) * 2 * UNITY_PI) * 0.5 + 0.5, 0);
    float b = max(cos((h + 0.333333) * 2 * UNITY_PI) * 0.5 + 0.5, 0);
    float gray = 0.2989 * r + 0.5870 * g + 0.1140 * b;
    return lerp(gray, float3(r, g, b), s) * smoothstep(0, 0.5, l) + 1 * smoothstep(0.5, 1, l);
}

Chris的c#代码的Php实现

也是从这里，这很好地解释了它的数学原理。

这基本上是一堆转换HSL(色相饱和度亮度)的函数

在PHP 5.6.15上测试并使用

TL;DR:完整的代码可以在Pastebin上找到。

##Hex to HSL 输入:十六进制颜色，格式:[#]0f4或[#]00ff44(磅号可选) 输出:HSL的程度，百分比，百分比

/**
* Input: hex color
* Output: hsl(in ranges from 0-1)
* 
* Takes the hex, converts it to RGB, and sends
* it to RGBToHsl.  Returns the output.
* 
*/
function hexToHsl($hex) {
    $r = "";
    $g = "";
    $b = "";

    $hex = str_replace('#', '', $hex);
    
    if (strlen($hex) == 3) {
        $r = substr($hex, 0, 1);
        $r = $r . $r;
        $g = substr($hex, 1, 1);
        $g = $g . $g;
        $b = substr($hex, 2, 1);
        $b = $b . $b;
    } elseif (strlen($hex) == 6) {
        $r = substr($hex, 0, 2);
        $g = substr($hex, 2, 2);
        $b = substr($hex, 4, 2);
    } else {
        return false;
    }

    $r = hexdec($r);
    $g = hexdec($g);
    $b = hexdec($b);

    $hsl =  rgbToHsl($r,$g,$b);
    return $hsl;
}

RGB到HSL

输入:RGB，范围0-255 输出:HSL的程度，百分比，百分比。

/**
* 
*Credits:
* https://stackoverflow.com/questions/4793729/rgb-to-hsl-and-back-calculation-problems
* http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/
*
* Called by hexToHsl by default.
*
* Converts an RGB color value to HSL. Conversion formula
* adapted from http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/.
* Assumes r, g, and b are contained in the range [0 - 255] and
* returns h, s, and l in the format Degrees, Percent, Percent.
*
* @param   Number  r       The red color value
* @param   Number  g       The green color value
* @param   Number  b       The blue color value
* @return  Array           The HSL representation
*/
function rgbToHsl($r, $g, $b){  
    //For the calculation, rgb needs to be in the range from 0 to 1. To convert, divide by 255 (ff). 
    $r /= 255;
    $g /= 255;
    $b /= 255;
    
    $myMax = max($r, $g, $b);
    $myMin = min($r, $g, $b);
    
    $maxAdd = ($myMax + $myMin);
    $maxSub = ($myMax - $myMin);
    
    //luminence is (max + min)/2
    $h = 0;
    $s = 0;
    $l = ($maxAdd / 2.0);
    
    //if all the numbers are equal, there is no saturation (greyscale).
    if($myMin != $myMax){
        if ($l < 0.5) {
            $s = ($maxSub / $maxAdd);
        } else {
            $s = (2.0 - $myMax - $myMin); //note order of opperations - can't use $maxSub here
            $s = ($maxSub / $s);
        }
        
        //find hue
        switch($myMax){
            case $r: 
                $h = ($g - $b);
                $h = ($h / $maxSub);
                break;
            case $g: 
                $h = ($b - $r); 
                $h = ($h / $maxSub);
                $h = ($h + 2.0);
                break;
            case $b: 
                $h = ($r - $g);
                $h = ($h / $maxSub); 
                $h = ($h + 4.0);
                break;
        } 
    }
    
    $hsl = hslToDegPercPerc($h, $s, $l);
    return $hsl;
}

##HSL(0-1范围)到程度，百分比，百分比格式

对于数学计算，HSL在0-1范围内更容易处理，但对于人类可读性而言，在Degrees, Percent, Percent中更容易处理。该函数接受范围为0-1的HSL，并返回以度、百分比、百分比为单位的HSL。

/**
* Input: HSL in ranges 0-1.
* Output: HSL in format Deg, Perc, Perc.
* 
* Note: rgbToHsl calls this function by default.
* 
* Multiplies $h by 60, and $s and $l by 100.
*/
function hslToDegPercPerc($h, $s, $l) {
    //convert h to degrees
    $h *= 60;
    
    if ($h < 0) {
        $h += 360;
    }
    
    //convert s and l to percentage
    $s *= 100;
    $l *= 100;
    
    $hsl['h'] = $h;
    $hsl['s'] = $s;
    $hsl['l'] = $l;
    return $hsl;
}

##HSL(度，百分比，百分比格式)到范围为0-1的HSL

该函数将格式为Degrees, Percent, Percent的HSL转换为0-1的范围，以便于计算。

/**
* Input: HSL in format Deg, Perc, Perc
* Output: An array containing HSL in ranges 0-1
* 
* Divides $h by 60, and $s and $l by 100.
* 
* hslToRgb calls this by default.
*/
function degPercPercToHsl($h, $s, $l) { 
    //convert h, s, and l back to the 0-1 range
    
    //convert the hue's 360 degrees in a circle to 1
    $h /= 360;
    
    //convert the saturation and lightness to the 0-1 
    //range by multiplying by 100
    $s /= 100;
    $l /= 100;
    
    $hsl['h'] =  $h;
    $hsl['s'] = $s;
    $hsl['l'] = $l;
    
    return $hsl;
}

##HSL到RGB

输入:格式为度，百分比，百分比的HSL 输出:RGB，格式为255,255,255。

/**
* Converts an HSL color value to RGB. Conversion formula
* adapted from http://www.niwa.nu/2013/05/math-behind-colorspace-conversions-rgb-hsl/.
* Assumes h, s, and l are in the format Degrees,
* Percent, Percent, and returns r, g, and b in 
* the range [0 - 255].
*
* Called by hslToHex by default.
*
* Calls: 
*   degPercPercToHsl
*   hueToRgb
*
* @param   Number  h       The hue value
* @param   Number  s       The saturation level
* @param   Number  l       The luminence
* @return  Array           The RGB representation
*/
function hslToRgb($h, $s, $l){
    $hsl = degPercPercToHsl($h, $s, $l);
    $h = $hsl['h'];
    $s = $hsl['s'];
    $l = $hsl['l'];

    //If there's no saturation, the color is a greyscale,
    //so all three RGB values can be set to the lightness.
    //(Hue doesn't matter, because it's grey, not color)
    if ($s == 0) {
        $r = $l * 255;
        $g = $l * 255;
        $b = $l * 255;
    }
    else {
        //calculate some temperary variables to make the 
        //calculation eaisier.
        if ($l < 0.5) {
            $temp2 = $l * (1 + $s);
        } else {
            $temp2 = ($l + $s) - ($s * $l);
        }
        $temp1 = 2 * $l - $temp2;
        
        //run the calculated vars through hueToRgb to
        //calculate the RGB value.  Note that for the Red
        //value, we add a third (120 degrees), to adjust 
        //the hue to the correct section of the circle for
        //red.  Simalarly, for blue, we subtract 1/3.
        $r = 255 * hueToRgb($temp1, $temp2, $h + (1 / 3));
        $g = 255 * hueToRgb($temp1, $temp2, $h);
        $b = 255 * hueToRgb($temp1, $temp2, $h - (1 / 3));
    }
        
    $rgb['r'] = $r;
    $rgb['g'] = $g;
    $rgb['b'] = $b;

    return $rgb;
}

###色调到RGB

hslToRgb调用此函数将色调转换为单独的RGB值。

/**
* Converts an HSL hue to it's RGB value.  
*
* Input: $temp1 and $temp2 - temperary vars based on 
* whether the lumanence is less than 0.5, and 
* calculated using the saturation and luminence
* values.
*  $hue - the hue (to be converted to an RGB 
* value)  For red, add 1/3 to the hue, green 
* leave it alone, and blue you subtract 1/3 
* from the hue.
*
* Output: One RGB value.
*
* Thanks to Easy RGB for this function (Hue_2_RGB).
* http://www.easyrgb.com/index.php?X=MATH&$h=19#text19
*
*/
function hueToRgb($temp1, $temp2, $hue) {
    if ($hue < 0) { 
        $hue += 1;
    }
    if ($hue > 1) {
        $hue -= 1;
    }
    
    if ((6 * $hue) < 1 ) {
        return ($temp1 + ($temp2 - $temp1) * 6 * $hue);
    } elseif ((2 * $hue) < 1 ) {
        return $temp2;
    } elseif ((3 * $hue) < 2 ) {
        return ($temp1 + ($temp2 - $temp1) * ((2 / 3) - $hue) * 6);
    }
    return $temp1;
}

##HSL到Hex

输入:HSL格式的度，百分比，百分比 输出:十六进制格式00ff22(没有磅号)。

转换为RGB，然后分别转换为十六进制。

/**
* Converts HSL to Hex by converting it to 
* RGB, then converting that to hex.
* 
* string hslToHex($h, $s, $l[, $prependPound = true]
* 
* $h is the Degrees value of the Hue
* $s is the Percentage value of the Saturation
* $l is the Percentage value of the Lightness
* $prependPound is a bool, whether you want a pound 
*  sign prepended. (optional - default=true)
*
* Calls: 
*   hslToRgb
*
* Output: Hex in the format: #00ff88 (with 
* pound sign).  Rounded to the nearest whole
* number.
*/
function hslToHex($h, $s, $l, $prependPound = true) {
    //convert hsl to rgb
    $rgb = hslToRgb($h,$s,$l);

    //convert rgb to hex
    $hexR = $rgb['r'];
    $hexG = $rgb['g'];
    $hexB = $rgb['b'];
    
    //round to the nearest whole number
    $hexR = round($hexR);
    $hexG = round($hexG);
    $hexB = round($hexB);
    
    //convert to hex
    $hexR = dechex($hexR);
    $hexG = dechex($hexG);
    $hexB = dechex($hexB);
    
    //check for a non-two string length
    //if it's 1, we can just prepend a
    //0, but if it is anything else non-2,
    //it must return false, as we don't 
    //know what format it is in.
    if (strlen($hexR) != 2) {
        if (strlen($hexR) == 1) {
            //probably in format #0f4, etc.
            $hexR = "0" . $hexR;
        } else {
            //unknown format
            return false;
        }
    }
    if (strlen($hexG) != 2) {
        if (strlen($hexG) == 1) {
            $hexG = "0" . $hexG;
        } else {
            return false;
        }
    }
    if (strlen($hexB) != 2) {
        if (strlen($hexB) == 1) {
            $hexB = "0" . $hexB;
        } else {
            return false;
        }
    }
    
    //if prependPound is set, will prepend a
    //# sign to the beginning of the hex code.
    //(default = true)
    $hex = "";
    if ($prependPound) {
        $hex = "#";
    }
    
    $hex = $hex . $hexR . $hexG . $hexB;
    
    return $hex;
}

对于所有说Garry Tan解决方案转换不正确从RGB到HSL和回来。这是因为他在代码中遗漏了数字的一部分。 我纠正了他的代码(javascript)。 对不起，俄语的链接，但在英语缺席- HSL-wiki

function toHsl(r, g, b)
{
    r /= 255.0;
    g /= 255.0;
    b /= 255.0;
    var max = Math.max(r, g, b);
    var min = Math.min(r, g, b);
    var h, s, l = (max + min) / 2.0;

    if(max == min)
    {
        h = s = 0; 
    }
    else
    {
        var d = max - min;
        s = (l > 0.5 ? d / (2.0 - max - min) : d / (max + min));

        if(max == r && g >= b)
        {
            h = 1.0472 * (g - b) / d ;
        }
        else if(max == r && g < b)
        {
            h = 1.0472 * (g - b) / d + 6.2832;
        }
        else if(max == g)
        {
            h = 1.0472 * (b - r) / d + 2.0944;
        }
        else if(max == b)
        {
            h = 1.0472 * (r - g) / d + 4.1888;
        }
    }
    return {
        str: 'hsl(' + parseInt(h / 6.2832 * 360.0 + 0.5) + ',' + parseInt(s * 100.0 + 0.5) + '%,' + parseInt(l * 100.0 + 0.5) + '%)',
        obj: { h: parseInt(h / 6.2832 * 360.0 + 0.5), s: parseInt(s * 100.0 + 0.5), l: parseInt(l * 100.0 + 0.5) }
    };
};

我从Brandon Mathis的HSL Picker源代码中得到了这个。

它最初是用CoffeeScript编写的。我使用在线转换器将其转换为JavaScript，并拿出验证用户输入是否为有效RGB值的机制。这个答案适用于我的用例，因为我发现这篇文章上投票最多的答案不能产生有效的HSL值。

注意，它返回一个hsla值，表示不透明/透明。0是完全透明的，1是完全不透明的。

function rgbToHsl(rgb) {
  var a, add, b, diff, g, h, hue, l, lum, max, min, r, s, sat;
  r = parseFloat(rgb[0]) / 255;
  g = parseFloat(rgb[1]) / 255;
  b = parseFloat(rgb[2]) / 255;
  max = Math.max(r, g, b);
  min = Math.min(r, g, b);
  diff = max - min;
  add = max + min;
  hue = min === max ? 0 : r === max ? ((60 * (g - b) / diff) + 360) % 360 : g === max ? (60 * (b - r) / diff) + 120 : (60 * (r - g) / diff) + 240;
  lum = 0.5 * add;
  sat = lum === 0 ? 0 : lum === 1 ? 1 : lum <= 0.5 ? diff / add : diff / (2 - add);
  h = Math.round(hue);
  s = Math.round(sat * 100);
  l = Math.round(lum * 100);
  a = parseFloat(rgb[3]) || 1;
  return [h, s, l, a];
}

@Mohsen代码的PHP实现(包括Test!)

很抱歉重新发布这篇文章。但我真的没有看到任何其他实现可以提供我所需的质量。

/**
 * Converts an HSL color value to RGB. Conversion formula
 * adapted from http://en.wikipedia.org/wiki/HSL_color_space.
 * Assumes h, s, and l are contained in the set [0, 1] and
 * returns r, g, and b in the set [0, 255].
 *
 * @param   {number}  h       The hue
 * @param   {number}  s       The saturation
 * @param   {number}  l       The lightness
 * @return  {Array}           The RGB representation
 */
  
function hue2rgb($p, $q, $t){
            if($t < 0) $t += 1;
            if($t > 1) $t -= 1;
            if($t < 1/6) return $p + ($q - $p) * 6 * $t;
            if($t < 1/2) return $q;
            if($t < 2/3) return $p + ($q - $p) * (2/3 - $t) * 6;
            return $p;
        }
function hslToRgb($h, $s, $l){
    if($s == 0){
        $r = $l;
        $g = $l;
        $b = $l; // achromatic
    }else{
        $q = $l < 0.5 ? $l * (1 + $s) : $l + $s - $l * $s;
        $p = 2 * $l - $q;
        $r = hue2rgb($p, $q, $h + 1/3);
        $g = hue2rgb($p, $q, $h);
        $b = hue2rgb($p, $q, $h - 1/3);
    }

    return array(round($r * 255), round($g * 255), round($b * 255));
}

/* Uncomment to test * /
for ($i=0;$i<360;$i++) {
  $rgb=hslToRgb($i/360, 1, .9);
  echo '<div style="background-color:rgb(' .$rgb[0] . ', ' . $rgb[1] . ', ' . $rgb[2] . ');padding:2px;"></div>';
}
/* End Test */

下面是GLSL中快速、超级简单、无分支的版本:

vec3 hsl2rgb( vec3 c ) {
    vec3 rgb = clamp(abs(mod(c.x*6.0 + vec3(0.0, 4.0, 2.0), 6.0)-3.0)-1.0, 0.0, 1.0);
    return c.z + c.y * (rgb-0.5)*(1.0-abs(2.0*c.z-1.0));
}

没有比这更短的了~

原始概念验证的链接:https://www.shadertoy.com/view/XljGzV

(免责声明:不是我的代码!)

一个hsl|的颜色值，设置在javascript，将立即 所有你需要做的是，然后访问 计算样式值

document.body.style.color = 'hsla(44, 100%, 50%, 0.8)';

console.log(window.getComputedStyle(document.body).color);

// displays: rgba(255, 187, 0, 0.8)

从技术上讲，我想，这甚至不是任何一行代码-这是 自动完成。所以，取决于你的环境，你 也许这样就能逃过一劫。并不是说没有 这里有很多深思熟虑的回复。我不知道你的 目标是。

现在，如果你想从rbg|a转换到hsl|a呢?

c++实现，性能可能比@Mohsen代码更好。它使用[0-6]范围的色调，避免除和乘6。S和L的范围为[0,1]

void fromRGBtoHSL(float rgb[], float hsl[])
{
     const float maxRGB = max(rgb[0], max(rgb[1], rgb[2]));
     const float minRGB = min(rgb[0], min(rgb[1], rgb[2]));
     const float delta2 = maxRGB + minRGB;
     hsl[2] = delta2 * 0.5f;

     const float delta = maxRGB - minRGB;
     if (delta < FLT_MIN)
         hsl[0] = hsl[1] = 0.0f;
     else
     {
         hsl[1] = delta / (hsl[2] > 0.5f ? 2.0f - delta2 : delta2);
         if (rgb[0] >= maxRGB)
         {
             hsl[0] = (rgb[1] - rgb[2]) / delta;
             if (hsl[0] < 0.0f)
                 hsl[0] += 6.0f;
         }
         else if (rgb[1] >= maxRGB)
             hsl[0] = 2.0f + (rgb[2] - rgb[0]) / delta;
         else
             hsl[0] = 4.0f + (rgb[0] - rgb[1]) / delta;
     }
}

void fromHSLtoRGB(const float hsl[], float rgb[])
{
    if(hsl[1] < FLT_MIN)
        rgb[0] = rgb[1] = rgb[2] = hsl[2];
    else if(hsl[2] < FLT_MIN)
        rgb[0] = rgb[1] = rgb[2] = 0.0f;
    else
    {
        const float q = hsl[2] < 0.5f ? hsl[2] * (1.0f + hsl[1]) : hsl[2] + hsl[1] - hsl[2] * hsl[1];
        const float p = 2.0f * hsl[2] - q;
        float t[] = {hsl[0] + 2.0f, hsl[0], hsl[0] - 2.0f};

        for(int i=0; i<3; ++i)
        {
            if(t[i] < 0.0f)
                t[i] += 6.0f;
            else if(t[i] > 6.0f)
                t[i] -= 6.0f;

            if(t[i] < 1.0f)
                rgb[i] = p + (q - p) * t[i];
            else if(t[i] < 3.0f)
                rgb[i] = q;
            else if(t[i] < 4.0f)
                rgb[i] = p + (q - p) * (4.0f - t[i]);
            else
                rgb[i] = p;
          }
      }
}

简短而精确- JS

使用这个JS代码(更多:rgb2hsl, hsv2rgb rgb2hsv和hsl2hsv) - php版本在这里

// input: h as an angle in [0,360] and s,l in [0,1] - output: r,g,b in [0,1]
function hsl2rgb(h,s,l) 
{
   let a=s*Math.min(l,1-l);
   let f= (n,k=(n+h/30)%12) => l - a*Math.max(Math.min(k-3,9-k,1),-1);
   return [f(0),f(8),f(4)];
}   

// oneliner version let hsl2rgb = (h,s,l, a=s*Math.min(l,1-l), f= (n,k=(n+h/30)%12) => l - a*Math.max(Math.min(k-3,9-k,1),-1)) => [f(0),f(8),f(4)]; // r,g,b are in [0-1], result e.g. #0812fa. let rgb2hex = (r,g,b) => "#" + [r,g,b].map(x=>Math.round(x*255).toString(16).padStart(2,0) ).join(''); console.log(`hsl: (30,0.2,0.3) --> rgb: (${hsl2rgb(30,0.2,0.3)}) --> hex: ${rgb2hex(...hsl2rgb(30,0.2,0.3))}`); // --------------- // UX // --------------- rgb= [0,0,0]; hs= [0,0,0]; let $ = x => document.querySelector(x); function changeRGB(i,e) { rgb[i]=e.target.value/255; hs = rgb2hsl(...rgb); refresh(); } function changeHS(i,e) { hs[i]=e.target.value/(i?255:1); rgb= hsl2rgb(...hs); refresh(); } function refresh() { rr = rgb.map(x=>x*255|0).join(', ') hh = rgb2hex(...rgb); tr = `RGB: ${rr}` th = `HSL: ${hs.map((x,i)=>i? (x*100).toFixed(2)+'%':x|0).join(', ')}` thh= `HEX: ${hh}` $('.box').style.backgroundColor=`rgb(${rr})`; $('.infoRGB').innerHTML=`${tr}`; $('.infoHS').innerHTML =`${th}\n${thh}`; $('#r').value=rgb[0]*255; $('#g').value=rgb[1]*255; $('#b').value=rgb[2]*255; $('#h').value=hs[0]; $('#s').value=hs[1]*255; $('#l').value=hs[2]*255; } function rgb2hsl(r,g,b) { let a=Math.max(r,g,b), n=a-Math.min(r,g,b), f=(1-Math.abs(a+a-n-1)); let h= n && ((a==r) ? (g-b)/n : ((a==g) ? 2+(b-r)/n : 4+(r-g)/n)); return [60*(h<0?h+6:h), f ? n/f : 0, (a+a-n)/2]; } refresh(); .box { width: 50px; height: 50px; margin: 20px; } body { display: flex; } <div> <input id="r" type="range" min="0" max="255" oninput="changeRGB(0,event)">R<br> <input id="g" type="range" min="0" max="255" oninput="changeRGB(1,event)">G<br> <input id="b" type="range" min="0" max="255" oninput="changeRGB(2,event)">B<br> <pre class="infoRGB"></pre> </div> <div> <div class="box hsl"></div> </div> <div> <input id="h" type="range" min="0" max="360" oninput="changeHS(0,event)">H<br> <input id="s" type="range" min="0" max="255" oninput="changeHS(1,event)">S<br> <input id="l" type="range" min="0" max="255" oninput="changeHS(2,event)">L<br> <pre class="infoHS"></pre><br> </div>

以下是我在wiki +错误分析中发现并精确描述的公式，

PHP -简短但精确

在这里，我将我的JS答案(数学细节在那里)重写为PHP -你可以在这里运行它

function hsl2rgb($h,$s,$l) 
{
  $a = $s * min($l, 1-$l);
  $k = function($n,$h) { return ($n+$h/30)%12;};
  $f = function($n) use ($h,$s,$l,$a,$k) { 
      return $l - $a * max( min($k($n,$h)-3, 9-$k($n,$h), 1),-1);
  };
  return [ $f(0), $f(8), $f(4) ];
}   

HSL到RGB的Typescript

以上所有选项都不能在我的代码在TS工作。

我调整了其中一个，现在它就像一个咒语:

type HslType = { h: number; s: number; l: number }

const hslToRgb = (hsl: HslType): RgbType => {
  let { h, s, l } = hsl

  // IMPORTANT if s and l between 0,1 remove the next two lines:
  s /= 100
  l /= 100

  const k = (n: number) => (n + h / 30) % 12
  const a = s * Math.min(l, 1 - l)
  const f = (n: number) =>
    l - a * Math.max(-1, Math.min(k(n) - 3, Math.min(9 - k(n), 1)))
  return {
    r: Math.round(255 * f(0)),
    g: Math.round(255 * f(8)),
    b: Math.round(255 * f(4)),
  }
}

由于circuitpython不支持colorsys(或目前移植到)，如果你试图在树莓派上处理这个转换，下面的工作(受制于本线程其他地方提到的舍入精度限制):

def hslToRgb (h, s, l): #in range 0-1 for h,s,l
    if s == 0:
        r = g = b = l #achromatic
    else:
        def hue2rgb(p, q, t):
            if t < 0: t += 1
            if t > 1: t -= 1
            if t < 1.0 / 6.0: return p + (q - p) * 6 * t
            if t < 1.0 / 2.0: return q
            if t < 2.0 / 3.0: return p + (q - p) * ((2.0 / 3.0) - t) * 6
            return p
        if l < 0.5:
            q = l * (1 + s)
        else:
            q = l + s - l * s
        p = 2 * l - q
        r = hue2rgb(p, q, h + 1.0/3.0)
        g = hue2rgb(p, q, h)
        b = hue2rgb(p, q, h - 1.0/3.0)
    return [round(r * 255), round(g * 255), round(b * 255)]

Java版本:

/*
Converts color from HSL/A format to RGB/A format
0 <= h <= 360
0 <= s, l, a <= 1
Based on: https://en.wikipedia.org/wiki/HSL_and_HSV#:~:text=%5Bedit%5D-,HSL%20to%20RGB%5Bedit%5D,-Given%20a%20color
 */
public RGB toRGB(double h, double s, double l, Double a) {
    double c = (1 - Math.abs(2 * l - 1)) * s;
    double x = c * (1 - Math.abs((h / 60) % 2 - 1));
    double m = l - c / 2;
    int[] RGBTag = Arrays.stream(getRGBTag(c, x)).mapToInt(e -> (int)Math.round((e + m) * 255)).toArray();
    return RGB(RGBTag[0], RGBTag[1], RGBTag[2], a);

}

private double[] getRGBTag(double c, double x) {
    if (h < 60) {
        return new double[] {c, x, 0};
    } else if (h < 120) {
        return new double[] {x, c, 0};
    } else if (h < 180) {
        return new double[] {0, c, x};
    } else if (h < 240) {
        return new double[] {0, x, c};
    } else if (h < 300) {
        return new double[] {x, 0, c};
    }
    return new double[] {c, 0, x};
}