我试着做一些复杂的事情，但应该是可能的。所以这里有一个对你们所有专家的挑战(这个论坛是由你们很多人组成的:))。
我正在创建一个问卷“组件”，我想加载在一个navigationcontroller(我的QuestionManagerViewController)。“组件”是一个“空的”UIViewController，它可以根据需要回答的问题加载不同的视图。
我的做法是:
Create Question1View object as a UIView subclass, defining some IBOutlets.
Create (using Interface Builder) the Question1View.xib (HERE IS WHERE MY PROBLEM PROBABLY IS). I set both the UIViewController and the UIView to be of class Question1View.
I link the outlets with the view's component (using IB).
I override the initWithNib of my QuestionManagerViewController to look like this:
- (id)initWithNibName:(NSString *)nibNameOrNil bundle:(NSBundle *)nibBundleOrNil {
if (self = [super initWithNibName:@"Question1View" bundle:nibBundleOrNil]) {
// Custom initialization
}
return self;
}
当我运行代码时，我得到这个错误:
2009-05-14 15:05:37.152 iMobiDines[17148:20b] ***由于未捕获异常'NSInternalInconsistencyException'而终止应用程序，原因:'-[UIViewController _loadViewFromNibNamed:bundle:] loaded the "Question1View" nib but the view outlet was not set.'
我确信有一种方法可以使用nib文件加载视图，而不需要创建一个viewController类。
你不应该在Interface Builder中将视图控制器的类设置为UIView的子类。这肯定是你的部分问题。保留它为UIViewController，它的子类，或者其他自定义类。
As for loading only a view from a xib, I was under the assumption that you had to have some sort of view controller (even if it doesn't extend UIViewController, which may be too heavyweight for your needs) set as the File's Owner in Interface Builder if you want to use it to define your interface. I did a little research to confirm this as well. This is because otherwise there would be no way to access any of the interface elements in the UIView, nor would there be a way to have your own methods in code be triggered by events.
If you use a UIViewController as your File's Owner for your views, you can just use initWithNibName:bundle: to load it and get the view controller object back. In IB, make sure you set the view outlet to the view with your interface in the xib. If you use some other type of object as your File's Owner, you'll need to use NSBundle's loadNibNamed:owner:options: method to load the nib, passing an instance of File's Owner to the method. All its properties will be set properly according to the outlets you define in IB.
谢谢大家。
我确实找到了做我想做的事的方法。
Create your UIView with the IBOutlets you need.
Create the xib in IB, design it to you liking and link it like this: The File's Owner is of class UIViewController (No custom subclass, but the "real" one). The File Owner's view is connected to the main view and its class is declared as the one from step 1).
Connect your controls with the IBOutlets.
The DynamicViewController can run its logic to decide what view/xib to load. Once its made the decission, in the loadView method put something like this:
NSArray* nibViews = [[NSBundle mainBundle] loadNibNamed:@"QPickOneView"
owner:self
options:nil];
QPickOneView* myView = [ nibViews objectAtIndex: 1];
myView.question = question;
就是这样!
主bundle的loadNibNamed方法将负责初始化视图和创建连接。
现在ViewController可以根据内存中的数据显示一个视图或另一个视图，而“父”屏幕不需要为这个逻辑而烦恼。
我也想做一些类似的事情，这是我发现的:
(SDK 3.1.3)
我有一个视图控制器a(本身由一个导航控制器拥有)，它在一个按钮按下加载VC B:
在AViewController.m
BViewController *bController = [[BViewController alloc] initWithNibName:@"Bnib" bundle:nil];
[self.navigationController pushViewController:bController animated:YES];
[bController release];
现在VC B有它的接口从Bnib，但当一个按钮被按下，我想去一个“编辑模式”有一个独立的UI从不同的nib，但我不想要一个新的VC的编辑模式，我想新的nib与我现有的B VC相关联。
在BViewController中。M(按按钮方式)
NSArray *nibObjects = [[NSBundle mainBundle] loadNibNamed:@"EditMode" owner:self options:nil];
UIView *theEditView = [nibObjects objectAtIndex:0];
self.editView = theEditView;
[self.view addSubview:theEditView];
然后按下另一个按钮(退出编辑模式):
[editView removeFromSuperview];
我又变回了原来的Bnib
这很好，但请注意我的EditMode。nib中只有一个顶级obj，一个UIView obj。
不管这个nib中的文件所有者是设置为BViewController还是默认的NSObject，但要确保文件所有者中的视图出口没有设置为任何东西。
如果是，那么我得到一个exc_bad_access崩溃，xcode继续加载6677个堆栈帧
显示一个内部UIView方法被反复调用…看起来像一个无限循环。
(视图出口是设置在我原来的Bnib然而)
希望这能有所帮助。
我不确定一些答案在谈论什么，但我需要把这个答案放在这里，当我下次在谷歌中搜索时。关键词:“如何从一个nib加载一个UIView”或“如何从一个NSBundle加载一个UIView”
下面的代码几乎100%直接来自Apress Beginning iPhone 3的书籍(第247页，“使用新的表视图单元格”):
- (void)viewDidLoad {
[super viewDidLoad];
NSArray *bundle = [[NSBundle mainBundle] loadNibNamed:@"Blah"
owner:self options:nil];
Blah *blah;
for (id object in bundle) {
if ([object isKindOfClass:[Blah class]]) {
blah = (Blah *)object;
break;
}
}
assert(blah != nil && "blah can't be nil");
[self.view addSubview: blah];
}
这假设你有一个UIView子类叫Blah，一个nib叫Blah它包含一个UIView它的类设置为Blah。
类别:+ LoadFromNib NSObject
#import "NSObject+LoadFromNib.h"
@implementation NSObject (LoadFromNib)
+ (id)loadFromNib:(NSString *)name classToLoad:(Class)classToLoad {
NSArray *bundle = [[NSBundle mainBundle] loadNibNamed:name owner:self options:nil];
for (id object in bundle) {
if ([object isKindOfClass:classToLoad]) {
return object;
}
}
return nil;
}
@end
迅速扩展
extension UIView {
class func loadFromNib<T>(withName nibName: String) -> T? {
let nib = UINib.init(nibName: nibName, bundle: nil)
let nibObjects = nib.instantiate(withOwner: nil, options: nil)
for object in nibObjects {
if let result = object as? T {
return result
}
}
return nil
}
}
还有一个正在使用的例子:
class SomeView: UIView {
class func loadFromNib() -> SomeView? {
return self.loadFromNib(withName: "SomeView")
}
}
还有一种更简单的方法来访问视图，而不是将nib作为数组处理。
1)创建一个自定义的View子类，其中包含你以后想要访问的任何出口。——MyView
2)在你想要加载和处理nib的UIViewController中，创建一个IBOutlet属性来保存加载的nib的视图
在MyViewController中(一个UIViewController子类)
@property (nonatomic, retain) IBOutlet UIView *myViewFromNib;
(别忘了合成它并在你的。m文件中发布它)
3)在IB中打开你的nib(我们称之为'myViewNib.xib')，设置你文件的所有者为MyViewController
4)现在连接你的文件的所有者出口myViewFromNib到nib的主视图。
5)现在在MyViewController中，写以下一行:
[[NSBundle mainBundle] loadNibNamed:@"myViewNib" owner:self options:nil];
当你这样做的时候，把你的财产称为“自我”。myViewFromNib”将让你从你的nib访问视图!
这是一个很好的问题(+1)，答案几乎是有帮助的;)抱歉，伙计们，虽然Gonso和AVeryDev都给出了很好的提示，但我花了很长时间才读完这篇文章。希望这个答案能帮助到其他人。
MyVC是持有这些东西的视图控制器。
MySubview是我们想从xib中加载的视图
In MyVC.xib, create a view of type MySubView that is the right size & shape & positioned where you want it.
In MyVC.h, have
IBOutlet MySubview *mySubView
// ...
@property (nonatomic, retain) MySubview *mySubview;
In MyVC.m, @synthesize mySubView; and don't forget to release it in dealloc.
In MySubview.h, have an outlet/property for UIView *view (may be unnecessary, but worked for me.) Synthesize & release it in .m
In MySubview.xib
set file owner type to MySubview, and link the view property to your view.
Lay out all the bits & connect to the IBOutlet's as desired
Back in MyVC.m, have
NSArray *xibviews = [[NSBundle mainBundle] loadNibNamed: @"MySubview" owner: mySubview options: NULL];
MySubview *msView = [xibviews objectAtIndex: 0];
msView.frame = mySubview.frame;
UIView *oldView = mySubview;
// Too simple: [self.view insertSubview: msView aboveSubview: mySubview];
[[mySubview superview] insertSubview: msView aboveSubview: mySubview]; // allows nesting
self.mySubview = msView;
[oldCBView removeFromSuperview];
对我来说棘手的一点是:其他答案中的提示从xib加载了我的视图，但没有替换MyVC中的视图(呸!)——我必须自己交换。
同样，为了访问mySubview的方法，.xib文件中的view属性必须设置为mySubview。否则，它会返回一个普通的UIView。
如果有一种方法来加载mySubview直接从它自己的xib，那将摇滚，但这让我在我需要的地方。
这是一件应该比较容易的事情。我最终扩展了UIViewController并添加了一个loadNib:inPlaceholder: selector。现在我可以说
self.mySubview = (MyView *)[self loadNib:@"MyView" inPlaceholder:mySubview];
下面是这个类别的代码(它和Gonso描述的一样):
@interface UIViewController (nibSubviews)
- (UIView *)viewFromNib:(NSString *)nibName;
- (UIView *)loadNib:(NSString *)nibName inPlaceholder:(UIView *)placeholder;
@end
@implementation UIViewController (nibSubviews)
- (UIView *)viewFromNib:(NSString *)nibName
{
NSArray *xib = [[NSBundle mainBundle] loadNibNamed:nibName owner:self options:nil];
for (id view in xib) { // have to iterate; index varies
if ([view isKindOfClass:[UIView class]]) return view;
}
return nil;
}
- (UIView *)loadNib:(NSString *)nibName inPlaceholder:(UIView *)placeholder
{
UIView *nibView = [self viewFromNib:nibName];
[nibView setFrame:placeholder.frame];
[self.view insertSubview:nibView aboveSubview:placeholder];
[placeholder removeFromSuperview];
return nibView;
}
@end
我有理由做同样的事情(从XIB文件编程加载一个视图)，但我需要完全从一个UIView的子类的子类的上下文(即不涉及视图控制器的任何方式)。为了做到这一点，我创建了这个实用方法:
+ (id) initWithNibName:(NSString *)nibName withSelf:(id)myself {
NSArray *bundle = [[NSBundle mainBundle] loadNibNamed:nibName
owner:myself options:nil];
for (id object in bundle) {
if ([object isKindOfClass:[myself class]]) {
return object;
}
}
return nil;
}
然后我从我的子类的initWithFrame方法调用它，如下所示:
- (id)initWithFrame:(CGRect)frame {
self = [Utilities initWithNibName:@"XIB1" withSelf:self];
if (self) {
// Initialization code.
}
return self;
}
张贴的一般利益;如果有人发现没有这样做的问题，请告诉我。
对于那些需要管理多个自定义视图实例的人，也就是Outlet Collection，我合并并定制了@Gonso， @AVeryDev和@Olie的答案:
Create a custom MyView : UIView and set it as "Custom Class" of the root UIView in the desired XIB;
Create all outlets you need in MyView (do it now because after point 3 the IB will propose you to connect outlets to the UIViewController and not to the custom view as we want);
Set your UIViewController as "File's Owner" of the custom view XIB;
In the UIViewController add a new UIViews for each instance of MyView you want, and connect them to UIViewController creating an Outlet Collection: these views will act as "wrapper" views for the custom view instances;
Finally, in the viewDidLoad of your UIViewController add the following lines:
NSArray *bundleObjects;
MyView *currView;
NSMutableArray *myViews = [NSMutableArray arrayWithCapacity:myWrapperViews.count];
for (UIView *currWrapperView in myWrapperViews) {
bundleObjects = [[NSBundle mainBundle] loadNibNamed:@"MyView" owner:self options:nil];
for (id object in bundleObjects) {
if ([object isKindOfClass:[MyView class]]){
currView = (MyView *)object;
break;
}
}
[currView.myLabel setText:@"myText"];
[currView.myButton setTitle:@"myTitle" forState:UIControlStateNormal];
//...
[currWrapperView addSubview:currView];
[myViews addObject:currView];
}
//self.myViews = myViews; if need to access them later..
我有一种命名xib的约定，其中的视图与视图相同。和视图控制器一样。这样，我就不必在代码中写出类名了。我从同名的nib文件中加载一个UIView。
一个名为MyView的类的例子。
创建一个名为MyView的nib文件。接口生成器中的xib
在Interface Builder中添加一个UIView。将其类设置为MyView。自定义到你的内心的内容，连接MyView的实例变量到子视图，你可能想以后访问。
在你的代码中，像这样创建一个新的MyView:
MyView * MyView = [MyView nib_viewfromnibwiowner:owner];
这是它的分类:
@implementation UIView (nib)
+ (id) nib_viewFromNib {
return [self nib_viewFromNibWithOwner:nil];
}
+ (id) nib_viewFromNibWithOwner:(id)owner {
NSString *className = NSStringFromClass([self class]);
NSArray *nib = [[NSBundle mainBundle] loadNibNamed:className owner:owner options:nil];
UIView *view = nil;
for(UIView *v in nib) {
if ([v isKindOfClass:[self class]]) {
view = v;
break;
}
}
assert(view != nil && "View for class not found in nib file");
[view nib_viewDidLoad];
return view;
}
// override this to do custom setup
-(void)nib_viewDidLoad {
}
然后，我将连接按钮与我正在使用的控制器的动作，并使用自定义视图子类中的outlet在标签上设置内容。
我做了一个我喜欢的分类:
UIView + NibInitializer.h
#import <UIKit/UIKit.h>
@interface UIView (NibInitializer)
- (instancetype)initWithNibNamed:(NSString *)nibNameOrNil;
@end
UIView + NibInitializer.m
#import "UIView+NibInitializer.h"
@implementation UIView (NibInitializer)
- (instancetype)initWithNibNamed:(NSString *)nibNameOrNil
{
if (!nibNameOrNil) {
nibNameOrNil = NSStringFromClass([self class]);
}
NSArray *viewsInNib = [[NSBundle mainBundle] loadNibNamed:nibNameOrNil
owner:self
options:nil];
for (id view in viewsInNib) {
if ([view isKindOfClass:[self class]]) {
self = view;
break;
}
}
return self;
}
@end
然后，像这样调用:
MyCustomView *myCustomView = [[MyCustomView alloc] initWithNibNamed:nil];
如果你的nib不是你的类名，请使用一个nib名。
为了在你的子类中覆盖它以获得额外的行为，它可以看起来像这样:
- (instancetype)initWithNibNamed:(NSString *)nibNameOrNil
{
self = [super initWithNibNamed:nibNameOrNil];
if (self) {
self.layer.cornerRadius = CGRectGetHeight(self.bounds) / 2.0;
}
return self;
}
下面是一种在Swift中实现的方法(目前正在XCode 7 beta 5中编写Swift 2.0)。
从你在接口构建器中设置为“自定义类”的UIView子类中创建一个像这样的方法(我的子类叫做RecordingFooterView):
class func loadFromNib() -> RecordingFooterView? {
let nib = UINib(nibName: "RecordingFooterView", bundle: nil)
let nibObjects = nib.instantiateWithOwner(nil, options: nil)
if nibObjects.count > 0 {
let topObject = nibObjects[0]
return topObject as? RecordingFooterView
}
return nil
}
然后你可以像这样调用它:
let recordingFooterView = recordingFooterView . loadfromnib ()
花了好几个小时后，我想出了以下解决办法。
按照以下步骤创建自定义UIView。
1)创建类myCustomView继承自UIView。
2)创建名称为myCustomView的.xib。
3)在你的.xib文件中改变UIView的类，在那里分配myCustomView类。
4)创建iboutlet
5)在myCustomView * customView中加载.xib。
使用下面的示例代码。
myCustomView * myView = [[[NSBundle mainBundle] loadNibNamed:@"myCustomView" owner:self options:nil] objectAtIndex:0];
[myView.description setText:@"description"];
注:对于那些仍然面临问题的人可以评论，我将提供他们的链接
示例项目的myCustomView
Swift用户可设计选项:
Create a custom UIView subclass and a xib files, that we will name after our own class name: in our case MemeView. Inside the Meme View class remember to define it as designable with the @IBDesignable attribute before the class declaration
Rember to set the File’s Owner in the xib with our custom UIView subclass in Indetity Inspector panel
In the xib file now we can build our interface, make constraints, create outlets, actions etc.
We need to implement few methods to our custom class to open the xib once initialized
class XibbedView: UIView {
weak var nibView: UIView!
override convenience init(frame: CGRect) {
let nibName = NSStringFromClass(self.dynamicType).componentsSeparatedByString(".").last!
self.init(nibName: nibName)
}
required init?(coder aDecoder: NSCoder) {
super.init(coder: aDecoder)
let nibName = NSStringFromClass(self.dynamicType).componentsSeparatedByString(".").last!
let nib = loadNib(nibName)
nib.frame = bounds
nib.translatesAutoresizingMaskIntoConstraints = false
addSubview(nib)
nibView = nib
setUpConstraints()
}
init(nibName: String) {
super.init(frame: CGRectZero)
let nibName = NSStringFromClass(self.dynamicType).componentsSeparatedByString(".").last!
let nib = loadNib(nibName)
nib.frame = bounds
nib.translatesAutoresizingMaskIntoConstraints = false
addSubview(nib)
nibView = nib
setUpConstraints()
}
func setUpConstraints() {
["V","H"].forEach { (quote) -> () in
let format = String(format:"\(quote):|[nibView]|")
addConstraints(NSLayoutConstraint.constraintsWithVisualFormat(format, options: [], metrics: nil, views: ["nibView" : nibView]))
}
}
func loadNib(name: String) -> UIView {
let bundle = NSBundle(forClass: self.dynamicType)
let nib = UINib(nibName: name, bundle: bundle)
let view = nib.instantiateWithOwner(self, options: nil)[0] as! UIView
return view
}
}
In our custom class we can also define some inspecatable properties to have full control over them from interface builder
@IBDesignable
class MemeView: XibbedView {
@IBInspectable var memeImage: UIImage = UIImage() {
didSet {
imageView.image = memeImage
}
}
@IBInspectable var textColor: UIColor = UIColor.whiteColor() {
didSet {
label.textColor = textColor
}
}
@IBInspectable var text: String = "" {
didSet {
label.text = text
}
}
@IBInspectable var roundedCorners: Bool = false {
didSet {
if roundedCorners {
layer.cornerRadius = 20.0
clipsToBounds = true
}
else {
layer.cornerRadius = 0.0
clipsToBounds = false
}
}
}
@IBOutlet weak var label: UILabel!
@IBOutlet weak var imageView: UIImageView!
}
一些例子:
如果我们需要在一个故事板或另一个xib中显示视图时添加更多信息，为此我们可以实现prepareForInterfaceBuilder()，此方法仅在接口生成器中打开文件时执行。
如果你做了我写的所有事情，但没有任何工作，这是一种通过在实现中添加断点来调试单个视图的方法。
这是视图层次结构。
希望这对您有所帮助，完整的示例可以在这里下载
在Swift 4中以编程方式从nib/xib加载视图:
// Load a view from a Nib given a placeholder view subclass
// Placeholder is an instance of the view to load. Placeholder is discarded.
// If no name is provided, the Nib name is the same as the subclass type name
//
public func loadViewFromNib<T>(placeholder placeholderView: T, name givenNibName: String? = nil) -> T {
let nib = loadNib(givenNibName, placeholder: placeholderView)
return instantiateView(fromNib: nib, placeholder: placeholderView)
}
// Step 1: Returns a Nib
//
public func loadNib<T>(_ givenNibName: String? = nil, placeholder placeholderView: T) -> UINib {
//1. Load and unarchive nib file
let nibName = givenNibName ?? String(describing: type(of: placeholderView))
let nib = UINib(nibName: nibName, bundle: Bundle.main)
return nib
}
// Step 2: Instantiate a view given a nib
//
public func instantiateView<T>(fromNib nib: UINib, placeholder placeholderView: T) -> T {
//1. Get top level objects
let topLevelObjects = nib.instantiate(withOwner: placeholderView, options: nil)
//2. Have at least one top level object
guard let firstObject = topLevelObjects.first else {
fatalError("\(#function): no top level objects in nib")
}
//3. Return instantiated view, placeholderView is not used
let instantiatedView = firstObject as! T
return instantiatedView
}
