正如在许多回答中提到的，电子邮件地址的领域是复杂的。在这种情况下，我强烈反对使用正则表达式。那些匹配(大多数)用例的异常复杂，难以读取，因此也难以维护。此外，它们仍然难以支持所有病例，而且速度缓慢。

微软的EmailAddress类在这方面有所帮助，但我认为也不是完美的。在几年前的一个开源项目中，我尝试使用定制的EmailParser。

在[EmailAddress]https://github.com/Qowaiv/Qowaiv/blob/master/src/Qowaiv/EmailAddress.cs中使用。

通过使用这种方法，不仅可以验证电子邮件地址，还可以清除显示名称的多种格式，去掉mailto:-前缀，并根据ip地址规范化域字面量，并将所有内容小写(注意，本地部分是大小写敏感的)。

你的解决方案应该支持的场景(上面提到的就是):

[TestCase(null)]
[TestCase("")]
[TestCase("..@test.com")]
[TestCase(".a@test.com")]
[TestCase("ab@sd@dd")]
[TestCase(".@s.dd")]
[TestCase("ab@988.120.150.10")]
[TestCase("ab@120.256.256.120")]
[TestCase("ab@120.25.1111.120")]
[TestCase("ab@[188.120.150.10")]
[TestCase("ab@188.120.150.10]")]
[TestCase("ab@[188.120.150.10].com")]
[TestCase("a@b.-de.cc")]
[TestCase("a@bde-.cc")]
[TestCase("a@bde.c-c")]
[TestCase("a@bde.cc.")]
[TestCase("ab@b+de.cc")]
[TestCase("a..b@bde.cc")]
[TestCase("_@bde.cc,")]
[TestCase("plainaddress")]
[TestCase("plain.address")]
[TestCase("@%^%#$@#$@#.com")]
[TestCase("@domain.com")]
[TestCase("Joe Smith <email@domain.com>")]
[TestCase("email.domain.com")]
[TestCase("email@domain@domain.com")]
[TestCase(".email@domain.com")]
[TestCase("email.@domain.com")]
[TestCase("email..email@domain.com")]
[TestCase("email@-domain.com")]
[TestCase("email@domain-.com")]
[TestCase("email@domain.com-")]
[TestCase("email@.domain.com")]
[TestCase("email@domain.com.")]
[TestCase("email@domain..com")]
[TestCase("email@111.222.333")]
[TestCase("email@111.222.333.256")]
[TestCase("email@[123.123.123.123")]
[TestCase("email@[123.123.123].123")]
[TestCase("email@123.123.123.123]")]
[TestCase("email@123.123.[123.123]")]
[TestCase("email@{leftbracket.com")]
[TestCase("email@rightbracket}.com")]
[TestCase("email@p|pe.com")]
[TestCase("isis@100%.nl")]
[TestCase("email@dollar$.com")]
[TestCase("email@r&d.com")]
[TestCase("email@#hash.com")]
[TestCase("email@wave~tilde.com")]
[TestCase("email@exclamation!mark.com")]
[TestCase("email@question?mark.com")]
[TestCase("email@obelix*asterisk.com")]
[TestCase("email@grave`accent.com")]
[TestCase("email@colon:colon.com")]
[TestCase("email@caret^xor.com")]
[TestCase("email@=qowaiv.com")]
[TestCase("email@plus+.com")]
[TestCase("email@domain.com>")]
[TestCase("email( (nested) )@plus.com")]
[TestCase("email)mirror(@plus.com")]
[TestCase("email@plus.com (not closed comment")]
[TestCase("email(with @ in comment)plus.com")]
[TestCase(@"""Joe Smith email@domain.com")]
[TestCase(@"""Joe Smith' email@domain.com")]
[TestCase(@"""Joe Smith""email@domain.com")]
[TestCase("email@mailto:domain.com")]
[TestCase("mailto:mailto:email@domain.com")]
[TestCase("Display Name <email@plus.com> (after name with display)")]
[TestCase("ReDoSaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa@aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa")]
public void IsInvalid(string email)
{
    Assert.IsFalse(EmailAddress.IsValid(email), email);
}

[TestCase("w@com")]
[TestCase("w.b.f@test.com")]
[TestCase("w.b.f@test.museum")]
[TestCase("a.a@test.com")]
[TestCase("ab@288.120.150.10.com")]
[TestCase("ab@188.120.150.10")]
[TestCase("ab@1.0.0.10")]
[TestCase("ab@120.25.254.120")]
[TestCase("ab@01.120.150.1")]
[TestCase("ab@88.120.150.021")]
[TestCase("ab@88.120.150.01")]
[TestCase("ab@[120.254.254.120]")]
[TestCase("local@2001:0db8:85a3:0000:0000:8a2e:0370:7334")]
[TestCase("local@[2001:0db8:85a3:0000:0000:8a2e:0370:7334]")]
[TestCase("2@bde.cc")]
[TestCase("-@bde.cc")]
[TestCase("a2@bde.cc")]
[TestCase("a-b@bde.cc")]
[TestCase("ab@b-de.cc")]
[TestCase("a+b@bde.cc")]
[TestCase("f.f.f@bde.cc")]
[TestCase("ab_c@bde.cc")]
[TestCase("_-_@bde.cc")]
[TestCase("k.haak@12move.nl")]
[TestCase("K.HAAK@12MOVE.NL")]
[TestCase("email@domain.com")]
[TestCase("email@domain")]
[TestCase("あいうえお@domain.com")]
[TestCase("local@あいうえお.com")]
[TestCase("firstname.lastname@domain.com")]
[TestCase("email@subdomain.domain.com")]
[TestCase("firstname+lastname@domain.com")]
[TestCase("email@123.123.123.123")]
[TestCase("email@[123.123.123.123]")]
[TestCase("1234567890@domain.com")]
[TestCase("a@domain.com")]
[TestCase("a.b.c.d@domain.com")]
[TestCase("aap.123.noot.mies@domain.com")]
[TestCase("1@domain.com")]
[TestCase("email@domain-one.com")]
[TestCase("_______@domain.com")]
[TestCase("email@domain.topleveldomain")]
[TestCase("email@domain.co.jp")]
[TestCase("firstname-lastname@domain.com")]
[TestCase("firstname-lastname@d.com")]
[TestCase("FIRSTNAME-LASTNAME@d--n.com")]
[TestCase("first-name-last-name@d-a-n.com")]
[TestCase("{local{name{{with{@leftbracket.com")]
[TestCase("}local}name}}with{@rightbracket.com")]
[TestCase("|local||name|with|@pipe.com")]
[TestCase("%local%%name%with%@percentage.com")]
[TestCase("$local$$name$with$@dollar.com")]
[TestCase("&local&&name&with&$@amp.com")]
[TestCase("#local##name#with#@hash.com")]
[TestCase("~local~~name~with~@tilde.com")]
[TestCase("!local!!name!with!@exclamation.com")]
[TestCase("?local??name?with?@question.com")]
[TestCase("*local**name*with*@asterisk.com")]
[TestCase("`local``name`with`@grave-accent.com")]
[TestCase("^local^^name^with^@xor.com")]
[TestCase("=local==name=with=@equality.com")]
[TestCase("+local++name+with+@equality.com")]
[TestCase("Joe Smith <email@domain.com>")]
[TestCase("email@domain.com (joe Smith)")]
[TestCase(@"""Joe Smith"" email@domain.com")]
[TestCase(@"""Joe\\tSmith"" email@domain.com")]
[TestCase(@"""Joe\""Smith"" email@domain.com")]
[TestCase(@"Test |<gaaf <email@domain.com>")]
[TestCase("MailTo:casesensitve@domain.com")]
[TestCase("mailto:email@domain.com")]
[TestCase("Joe Smith <mailto:email@domain.com>")]
[TestCase("Joe Smith <mailto:email(with comment)@domain.com>")]
[TestCase(@"""With extra < within quotes"" Display Name<email@domain.com>")]
[TestCase("aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa@aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa.aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa")]
public void IsValid(string email)
{
    Assert.IsTrue(EmailAddress.IsValid(email), email);
}

Personally, I would say that you should just make sure there is an @ symbol in there, with possibly a . character. There's many regexes you could use of varying correctness, but I think most of these leave out valid email addresses, or let invalid ones through. If people want to put in a fake email address, they will put in a fake one. If you need to verify that the email address is legit, and that the person is in control of that email address, then you will need to send them an email with a special coded link so they can verify that it indeed is a real address.

这是一个老问题，但我在SO上找到的所有答案，包括最近的答案，都与这个问题类似。然而，在。net 4.5 / MVC 4中，你可以通过从System.ComponentModel中添加[EmailAddress]注释来向表单添加电子邮件地址验证。DataAnnotations，所以我想知道为什么我不能只使用。net的内置功能。

这似乎是可行的，而且在我看来是相当优雅的:

using System.ComponentModel.DataAnnotations;

class ValidateSomeEmails
{
    static void Main(string[] args)
    {
        var email = new EmailAddressAttribute();
        email.IsValid("someone@somewhere.com");         //true
        email.IsValid("someone@somewhere.co.uk");       //true
        email.IsValid("someone+tag@somewhere.net");     //true
        email.IsValid("futureTLD@somewhere.fooo");      //true
        
        email.IsValid("fdsa");                          //false
        email.IsValid("fdsa@");                         //false
        email.IsValid("fdsa@fdsa");                     //false
        email.IsValid("fdsa@fdsa.");                    //false

        //one-liner
        if (new EmailAddressAttribute().IsValid("someone@somewhere.com")) 
            return true;
    }
}

电子邮件地址验证并不像看起来那么简单。实际上，从理论上讲，仅使用正则表达式完全验证电子邮件地址是不可能的。

请查看我的博客文章，了解关于这个主题的讨论以及使用FParsec的f#实现。[/ shameless_plug]

短而准确的代码

string Email = txtEmail.Text;
if (Email.IsValidEmail())
{
   //use code here 
}

public static bool IsValidEmail(this string email)
{
  string pattern = @"^(?!\.)(""([^""\r\\]|\\[""\r\\])*""|" + @"([-a-z0-9!#$%&'*+/=?^_`{|}~]|(?<!\.)\.)*)(?<!\.)" + @"@[a-z0-9][\w\.-]*[a-z0-9]\.[a-z][a-z\.]*[a-z]$";    
  var regex = new Regex(pattern, RegexOptions.IgnoreCase);    
  return regex.IsMatch(email);
}

在c#的regex中有文化问题，而不是js。所以我们需要在US模式下使用regex进行邮件检查。如果你不使用ECMAScript模式，你的语言特殊字符是在A-Z与正则表达式中隐含的。

Regex.IsMatch(email, @"^([a-zA-Z0-9_\-\.]+)@((\[[0-9]{1,3}\.[0-9]{1,3}\.[0-9]{1,3}\.)|(([a-zA-Z0-9_\-]+\.)+))([a-zA-Z]{2,4}|[0-9]{1,3})(\]?)$", RegexOptions.ECMAScript)