当我的脚本正在执行一些可能需要时间的任务时,我如何使用进度条?

例如,一个函数需要一段时间才能完成,完成后返回True。如何在函数执行期间显示进度条?

请注意,我需要这是实时的,所以我不知道该怎么做。我需要一根线吗?我不知道。

现在我没有打印任何东西,而函数正在执行,但一个进度条会很好。此外,我更感兴趣的是从代码的角度如何做到这一点。


当前回答

这里有一个简单的解决方案!

void = '-'
fill = '#'
count = 100/length
increaseCount = 0
for i in range(length):
    print('['+(fill*i)+(void*(length-i))+'] '+str(int(increaseCount))+'%',end='\r')
    increaseCount += count
    time.sleep(0.1)
print('['+(fill*(i+1))+(void*(length-(i+1)))+'] '+str(int(increaseCount))+'%',end='\n')

注意:如果需要,可以修改fill和“void”字符。

加载条(图片)

其他回答

这在Python3中非常简单:

   import time
   import math

    def show_progress_bar(bar_length, completed, total):
        bar_length_unit_value = (total / bar_length)
        completed_bar_part = math.ceil(completed / bar_length_unit_value)
        progress = "*" * completed_bar_part
        remaining = " " * (bar_length - completed_bar_part)
        percent_done = "%.2f" % ((completed / total) * 100)
        print(f'[{progress}{remaining}] {percent_done}%', end='\r')

    bar_length = 30
    total = 100
    for i in range(0, total + 1):
        show_progress_bar(bar_length, i, total)
        time.sleep(0.1)

    print('\n')

我喜欢Brian Khuu的答案,因为它简单,不需要外部包。我做了一点改动,所以我在这里添加了我的版本:

import sys
import time


def updt(total, progress):
    """
    Displays or updates a console progress bar.

    Original source: https://stackoverflow.com/a/15860757/1391441
    """
    barLength, status = 20, ""
    progress = float(progress) / float(total)
    if progress >= 1.:
        progress, status = 1, "\r\n"
    block = int(round(barLength * progress))
    text = "\r[{}] {:.0f}% {}".format(
        "#" * block + "-" * (barLength - block), round(progress * 100, 0),
        status)
    sys.stdout.write(text)
    sys.stdout.flush()


runs = 300
for run_num in range(runs):
    time.sleep(.1)
    updt(runs, run_num + 1)

它取总运行次数(total)和目前处理的运行次数(progress),假设total >= progress。结果如下所示:

[#####---------------] 27%

没有外部包。一段现成的代码。

您可以自定义进度条符号“#”,进度条大小,文本前缀等。

Python 3.3 +

import sys
def progressbar(it, prefix="", size=60, out=sys.stdout): # Python3.3+
    count = len(it)
    def show(j):
        x = int(size*j/count)
        print("{}[{}{}] {}/{}".format(prefix, "#"*x, "."*(size-x), j, count), 
                end='\r', file=out, flush=True)
    show(0)
    for i, item in enumerate(it):
        yield item
        show(i+1)
    print("\n", flush=True, file=out)

用法:

import time    
for i in progressbar(range(15), "Computing: ", 40):
    time.sleep(0.1) # any code you need

要填满整个字符空间,请使用unicode u"█"字符替换"#"。使用for i in progressbar(range(100)):…你会得到:

不需要第二个线程。上面的一些解决方案/包需要。 适用于任何可迭代对象,它指的是任何可以使用len()的对象。一个列表,一个字典,比如[' A ', 'b', 'c'…' g '] 使用生成器的工作只需要用list()来包装它。例如,对于i in progressbar(list(your_generator), "Computing: ", 40):除非工作在生成器中完成。在这种情况下,您需要另一种解决方案(如tqdm)。

您还可以通过将out更改为sys来更改输出。例如Stderr。


Python 3.6+ (f-string)

def progressbar(it, prefix="", size=60, out=sys.stdout): # Python3.6+
    count = len(it)
    def show(j):
        x = int(size*j/count)
        print(f"{prefix}[{u'█'*x}{('.'*(size-x))}] {j}/{count}", end='\r', file=out, flush=True)
    show(0)
    for i, item in enumerate(it):
        yield item
        show(i+1)
    print("\n", flush=True, file=out)

Python 2 (old-code)

import sys
def progressbar(it, prefix="", size=60, out=sys.stdout):
    count = len(it)
    def show(j):
        x = int(size*j/count)
        out.write("%s[%s%s] %i/%i\r" % (prefix, u"#"*x, "."*(size-x), j, count))
        out.flush()        
    show(0)
    for i, item in enumerate(it):
        yield item
        show(i+1)
    out.write("\n")
    out.flush()

它在我的程序中工作得很好。此外,我们需要添加一个计数器来指示循环时间。这个计数器作为方法update的参数。 例如:读取测试文件的所有行,并对它们进行处理。假设函数dosth()与变量i无关。

lines = open(sys.argv[1]).readlines()
i = 0
widgets=[Percentage(), Bar()]
pbar = ProgressBar(widgets=widgets,maxval=len(lines)).start()
pbar.start()
for line in lines:<pre>
    dosth();
    i += 1
    pbar.update(i)</pre>
pbar.finish()

变量i通过方法update控制pbar的状态

对于类似的应用程序(在循环中跟踪进度),我简单地使用python-progressbar:

他们的例子是这样的,

from progressbar import *               # just a simple progress bar


widgets = ['Test: ', Percentage(), ' ', Bar(marker='0',left='[',right=']'),
           ' ', ETA(), ' ', FileTransferSpeed()] #see docs for other options

pbar = ProgressBar(widgets=widgets, maxval=500)
pbar.start()

for i in range(100,500+1,50):
    # here do something long at each iteration
    pbar.update(i) #this adds a little symbol at each iteration
pbar.finish()
print