似乎没有人想出一个不需要任何技巧的最简单的解决方案:

定义一个变量来指示承诺正在运行 在promise中添加.finally子句，将变量设置为false(可以在promise创建后的任何时间执行) 之后，在代码中检查上述变量是否为真或假，以查看Promise是否仍在运行。

如果你不只是想知道它是否完成了，那么除了.finally之外，还要添加.then和.catch子句，将变量设置为"resolved"或"rejected"。

唯一的缺点是，在添加子句时，状态变量不会立即(同步地)设置，以防承诺已经完成。因此，最好将其添加到创建承诺后最早的位置。

例子:

async function worker(){
  // wait a very short period of time
  await (new Promise(resolve => setTimeout(resolve, 100)))
  //...
}

const w1=worker()


let w1_running=true
w1.finally( ()=> {w1_running=false});

//...
//Then check if it's running

(async ()=>{
  while(true){
    if (w1_running) {
      console.log("Still Busy :(")
    } else {
      console.log("All done :)")
      break
    }
    await (new Promise(resolve => setTimeout(resolve, 10)))
  }
})()

// Note we need some async action started otherwise the event loop would never reach the code in the function `worker` or in the `.finally` clause

这里是一个更充实的QueryablePromise的es6版本，允许在第一次解析后进行链接和捕获，并立即解析或拒绝以保持api与本机Promise一致。

const PROMISE = Symbol('PROMISE') const tap = fn => x => (fn(x), x) const trace = label => tap(x => console.log(label, x)) class QueryablePromise { resolved = false rejected = false fulfilled = false catchFns = [] constructor(fn) { this[PROMISE] = new Promise(fn) .then(tap(() => { this.fulfilled = true this.resolved = true })) .catch(x => { this.fulfilled = true this.rejected = true return Promise.reject(x) }) } then(fn) { this[PROMISE].then(fn) return this } catch(fn) { this[PROMISE].catch(fn) return this } static resolve(x) { return new QueryablePromise((res) => res(x)) } static reject(x) { return new QueryablePromise((_, rej) => rej(x)) } } const resolvedPromise = new QueryablePromise((res) => { setTimeout(res, 200, 'resolvedPromise') }) const rejectedPromise = new QueryablePromise((_, rej) => { setTimeout(rej, 200, 'rejectedPromise') }) // ensure our promises have not been fulfilled console.log('test 1 before: is resolved', resolvedPromise.resolved) console.log('test 2 before: is rejected', rejectedPromise.rejected) setTimeout(() => { // check to see the resolved status of our promise console.log('test 1 after: is resolved', resolvedPromise.resolved) console.log('test 2 after: is rejected', rejectedPromise.rejected) }, 300) // make sure we can immediately resolve a QueryablePromise const immediatelyResolvedPromise = QueryablePromise.resolve('immediatelyResolvedPromise') // ensure we can chain then .then(trace('test 3 resolved')) .then(trace('test 3 resolved 2')) .catch(trace('test 3 rejected')) // make sure we can immediately reject a QueryablePromise const immediatelyRejectedPromise = QueryablePromise.reject('immediatelyRejectedPromise') .then(trace('test 4 resolved')) .catch(trace('test 4 rejected')) <script src="https://codepen.io/synthet1c/pen/KyQQmL.js"></script>

我为此做了一个包裹。与这里的大多数其他答案不同，它不会接受未经处理的拒绝。

npm install p-state

import timers from 'timers/promises';
import {promiseStateSync} from 'p-state';

const timeoutPromise = timers.setTimeout(100);

console.log(promiseStateSync(timeoutPromise));
//=> 'pending'

await timeoutPromise;

console.log(promiseStateSync(timeoutPromise));
//=> 'fulfilled'

不，没有同步API，但这是我的async承诺(在@Matthijs的帮助下):

函数promiseState(p) { Const t = {}; 回报的承诺。种族([p t]) .then(v => (v == t)?"pending": " completed "， () => "rejected"); ｝ var a = Promise.resolve(); var b = Promise.reject(); var c = new Promise(() => {}); promiseState (a)。Then (state => console.log(state));/ /实现 promiseState (b)。Then (state => console.log(state));/ /拒绝 promiseState (c)。Then (state => console.log(state));/ /等待

您可以扩展Promise类来创建一个新的可查询的Promise 类。

您可以通过继承本机可用的Promise类来创建自己的子类，比如QueryablePromise，它的实例上有一个可用的status属性，您可以使用该属性同步查询Promise对象的状态。它的实现可以在下面看到，或者参考这个来获得更好的解释。

class QueryablePromise extends Promise { constructor (executor) { super((resolve, reject) => executor( data => { resolve(data) this._status = 'Resolved' }, err => { reject(err) this._status = 'Rejected' }, )) this._status = 'Pending' } get status () { return this._status } } // Create a promise that resolves after 5 sec var myQueryablePromise = new QueryablePromise((resolve, reject) => { setTimeout(() => resolve(), 5000) }) // Log the status of the above promise every 500ms setInterval(() => { console.log(myQueryablePromise.status) }, 500)

我浏览了这个问题的解决方案，没有找到一个与我在Node.js中使用的简单方法相对应的解决方案。

我已经定义了一个简单的类PromiseMonitor，它将承诺作为其构造函数的单个参数，并具有一个字符串属性.status，它返回与承诺状态对应的标准字符串值，“pending”，“resolved”或“rejected”，以及四个布尔属性.pending， .resolved， .rejected和.error。只有当.rejected为true并且拒绝回调被传递一个Error对象时，属性. Error才被设置为true。

该类只是在promise上使用.then()来在promise被解决或拒绝时更改PromiseMonitor的状态。它不会干扰原始承诺的任何其他使用。代码如下:

class PromiseMonitor {
    constructor(prm){
        this._status = "pending";
        this._pending = true;
        this._resolved = false;
        this._rejected = false;
        this._error = false;
        prm
            .then( ()=>{  
                        this._status = "resolved"; 
                        this._resolved = true; 
                        this._pending = false; 
                    } 
                , (err)=>{ 
                        this._status = "rejected";
                        this._pending = false;
                        this._rejected = true;
                        this._error = err instanceof Error ? true: false ; 
                    } 
                );
    }

    get status(){ return this._status; };
    get pending(){ return this._pending; };
    get resolved(){ return this._resolved; };
    get rejected(){ return this._rejected; };
    get error(){ return this._error };
};

要监视Promise的状态，只需创建一个PromiseMonitor实例，将Promise作为参数传入，例如:

let promiseObject = functionThatReturnsAPromise();
let promiseMonitor = new PromiseMonitor( promiseObject );

现在您可以同步检查promiseMonitor的所有属性，它将跟踪原始承诺的状态。下面是一个测试脚本，它演示了正在监视的承诺的三种可能的解决方案。

let ticks = 0;
let tickerID = setInterval( ()=>{++ticks; console.log(`..tick ${ticks}`)}, 1000);

async function run(){
    console.log("Start");

    let delay = prmDelay(2000);
    let delayMonitor = new PromiseMonitor(delay);

    // normal handling of delay promise
    delay.then((result)=>( console.log("Normal resolution of delay using .then()") ) );

    console.log("delay at start:\n", delay);
    console.log("delayMonitor at start:\n", delayMonitor);
    await delay;
    console.log("delay finished:\n", delay);
    console.log("delayMonitor finished:\n", delayMonitor);


    console.log("\n\n TEST2: Rejection without an Error test ================================")
    let rejDelay = prmDelay(3000, "reject");
    let rejMonitor = new PromiseMonitor(rejDelay);

    // normal handling of reject result on promise
    rejDelay.then((result)=>( console.log("Normal resolution of rejDelay using .then will not happen") ) 
                    , (err)=>( console.log("Rejection of rejDelay handled using .then")));

    console.log("rejDelay at start:\n", rejDelay);
    console.log("rejMonitor at start:\n", rejMonitor);

    await rejDelay.catch( (err)=>{ console.log( "Caught error using .catch on rejDelay" ); });

    console.log("rejDelay finished:\n", rejDelay);
    console.log("rejMonitor finished:\n", rejMonitor);


    console.log("\n\n TEST3: Rejection with an Error test ================================")
    let errMonitor ;
    let errDelay;
    try{

        errDelay = prmDelay(1000, "error");
        errMonitor = new PromiseMonitor(errDelay);
        
        // normal handling of results of the original promise
        errDelay.then(
            (result)=>{ 
                console.log("Normal expiry of errDelay");
                console.log("Monitor Status is " + errMonitor.status )
            } 
            , (err)=>{
                console.log("** Rejection of errDelay handled using .then()");
                console.log("   Monitor Status is " + errMonitor.status )
            }
        );

        console.log("errDelay at start:\n", errDelay);
        console.log("errMonitor at start:\n", errMonitor);

        await errDelay;

        console.log("**** This should never be run");

    } catch(err) { 

        console.log( "** Caught error on errDelay using try{}catch{}:" ); 
        console.log( "   Monitor Status is " + errMonitor.status )

    };

    console.log("errDelay finished:\n", errDelay);
    console.log("errMonitor finished:\n", errMonitor);
    

    clearInterval(tickerID);


}

/**
 * Creates a new promise with a specific result
 * @param {*} tt 
 * @param {*} exitType ("resolve", "reject" or "error")
 */
function prmDelay (tt, exitType) {
    
    return new Promise(function(resolve, reject) {
        if( exitType == 'reject' ){
            setTimeout(()=>{ reject("REJECTED")}, tt);
        } else if( exitType== 'error'){
            setTimeout(()=>{ reject(new Error( "ERROR Rejection") ); }, tt);
        } else {
            setTimeout(()=>{ resolve("RESOLVED") }, tt);
        } ;
    });
};


run();