部署.sh

#!/bin/bash

while [[ "$#" -gt 0 ]]; do
    case $1 in
        -t|--target) target="$2"; shift ;;
        -u|--uglify) uglify=1 ;;
        *) echo "Unknown parameter passed: $1"; exit 1 ;;
    esac
    shift
done

echo "Where to deploy: $target"
echo "Should uglify  : $uglify"

用法：

./deploy.sh -t dev -u

# OR:

./deploy.sh --target dev --uglify

如果您正在制作可与其他实用程序互换的脚本，下面的灵活性可能很有用。

以下任一项：

command -x=myfilename.ext --another_switch 

Or:

command -x myfilename.ext --another_switch

代码如下：

STD_IN=0

prefix=""
key=""
value=""
for keyValue in "$@"
do
  case "${prefix}${keyValue}" in
    -i=*|--input_filename=*)  key="-i";     value="${keyValue#*=}";; 
    -ss=*|--seek_from=*)      key="-ss";    value="${keyValue#*=}";;
    -t=*|--play_seconds=*)    key="-t";     value="${keyValue#*=}";;
    -|--stdin)                key="-";      value=1;;
    *)                                      value=$keyValue;;
  esac
  case $key in
    -i) MOVIE=$(resolveMovie "${value}");  prefix=""; key="";;
    -ss) SEEK_FROM="${value}";          prefix=""; key="";;
    -t)  PLAY_SECONDS="${value}";           prefix=""; key="";;
    -)   STD_IN=${value};                   prefix=""; key="";; 
    *)   prefix="${keyValue}=";;
  esac
done

我想提供我的选项解析版本，它允许以下内容：

-s p1
--stage p1
-w somefolder
--workfolder somefolder
-sw p1 somefolder
-e=hello

也允许这样做（可能不需要）：

-s--workfolder p1 somefolder
-se=hello p1
-swe=hello p1 somefolder

您必须在使用前决定是否在选项上使用=。这是为了保持代码干净。

while [[ $# > 0 ]]
do
    key="$1"
    while [[ ${key+x} ]]
    do
        case $key in
            -s*|--stage)
                STAGE="$2"
                shift # option has parameter
                ;;
            -w*|--workfolder)
                workfolder="$2"
                shift # option has parameter
                ;;
            -e=*)
                EXAMPLE="${key#*=}"
                break # option has been fully handled
                ;;
            *)
                # unknown option
                echo Unknown option: $key #1>&2
                exit 10 # either this: my preferred way to handle unknown options
                break # or this: do this to signal the option has been handled (if exit isn't used)
                ;;
        esac
        # prepare for next option in this key, if any
        [[ "$key" = -? || "$key" == --* ]] && unset key || key="${key/#-?/-}"
    done
    shift # option(s) fully processed, proceed to next input argument
done

另一个Shell参数分析器（ASAP）

符合POSIX，无getopt

我受到@bronson相对简单的回答的启发，并试图改进它（不增加太多复杂性）。结果如下：

使用-n[arg]、-abn[arg]，--name[arg]和--name=arg样式中的任意一种选项；参数可以按任何顺序出现，循环后$@中只留下位置参数；使用--强制将剩余的参数视为位置参数；检测无效选项和缺少的参数；不依赖于getopt或外部工具（一个功能使用简单的sed命令）；便携式，紧凑，可读性强，具有独立功能。

# Convenience functions.
usage_error () { echo >&2 "$(basename $0):  $1"; exit 2; }
assert_argument () { test "$1" != "$EOL" || usage_error "$2 requires an argument"; }

# One loop, nothing more.
if [ "$#" != 0 ]; then
  EOL=$(printf '\1\3\3\7')
  set -- "$@" "$EOL"
  while [ "$1" != "$EOL" ]; do
    opt="$1"; shift
    case "$opt" in

      # Your options go here.
      -f|--flag) flag='true';;
      -n|--name) assert_argument "$1" "$opt"; name="$1"; shift;;

      # Arguments processing. You may remove any unneeded line after the 1st.
      -|''|[!-]*) set -- "$@" "$opt";;                                          # positional argument, rotate to the end
      --*=*)      set -- "${opt%%=*}" "${opt#*=}" "$@";;                        # convert '--name=arg' to '--name' 'arg'
      -[!-]?*)    set -- $(echo "${opt#-}" | sed 's/\(.\)/ -\1/g') "$@";;       # convert '-abc' to '-a' '-b' '-c'
      --)         while [ "$1" != "$EOL" ]; do set -- "$@" "$1"; shift; done;;  # process remaining arguments as positional
      -*)         usage_error "unknown option: '$opt'";;                        # catch misspelled options
      *)          usage_error "this should NEVER happen ($opt)";;               # sanity test for previous patterns

    esac
  done
  shift  # $EOL
fi

# Do something cool with "$@"... \o/

注：我知道。。。二进制模式为0x01030307的参数可能会破坏逻辑。但是，如果有人在命令行中传递这样的参数，他们应该得到它。

在@brunobronosky的回答基础上，我添加了一个“预处理器”来处理一些常见的格式：

将--longopt=val展开为--longopt-val将-xyz展开为-x-y-z支持--表示标志的结束显示意外选项的错误小巧易读的选项开关

#!/bin/bash

# Report usage
usage() {
  echo "Usage:"
  echo "$(basename "$0") [options] [--] [file1, ...]"
}

invalid() {
  echo "ERROR: Unrecognized argument: $1" >&2
  usage
  exit 1
}

# Pre-process options to:
# - expand -xyz into -x -y -z
# - expand --longopt=arg into --longopt arg
ARGV=()
END_OF_OPT=
while [[ $# -gt 0 ]]; do
  arg="$1"; shift
  case "${END_OF_OPT}${arg}" in
    --) ARGV+=("$arg"); END_OF_OPT=1 ;;
    --*=*)ARGV+=("${arg%%=*}" "${arg#*=}") ;;
    --*) ARGV+=("$arg") ;;
    -*) for i in $(seq 2 ${#arg}); do ARGV+=("-${arg:i-1:1}"); done ;;
    *) ARGV+=("$arg") ;;
  esac
done

# Apply pre-processed options
set -- "${ARGV[@]}"

# Parse options
END_OF_OPT=
POSITIONAL=()
while [[ $# -gt 0 ]]; do
  case "${END_OF_OPT}${1}" in
    -h|--help)      usage; exit 0 ;;
    -p|--password)  shift; PASSWORD="$1" ;;
    -u|--username)  shift; USERNAME="$1" ;;
    -n|--name)      shift; names+=("$1") ;;
    -q|--quiet)     QUIET=1 ;;
    -C|--copy)      COPY=1 ;;
    -N|--notify)    NOTIFY=1 ;;
    --stdin)        READ_STDIN=1 ;;
    --)             END_OF_OPT=1 ;;
    -*)             invalid "$1" ;;
    *)              POSITIONAL+=("$1") ;;
  esac
  shift
done

# Restore positional parameters
set -- "${POSITIONAL[@]}"

我给你一个函数parse_params，它将从命令行解析参数。

这是一个纯Bash解决方案，没有额外的实用程序。不会污染全球范围。轻松地返回简单易用的变量，您可以在这些变量上构建进一步的逻辑。params前面的破折号数量无关紧要（--all等于-all等于all=all）

下面的脚本是复制粘贴工作演示。请参见show_use函数以了解如何使用parse_param。

限制：

不支持空格分隔的参数（-d 1）参数名称将丢失破折号，因此--any参数和-anyparam等效eval$（parse_params“$@”）必须在bash函数中使用（它在全局范围内不起作用）

#!/bin/bash

# Universal Bash parameter parsing
# Parse equal sign separated params into named local variables
# Standalone named parameter value will equal its param name (--force creates variable $force=="force")
# Parses multi-valued named params into an array (--path=path1 --path=path2 creates ${path[*]} array)
# Puts un-named params as-is into ${ARGV[*]} array
# Additionally puts all named params as-is into ${ARGN[*]} array
# Additionally puts all standalone "option" params as-is into ${ARGO[*]} array
# @author Oleksii Chekulaiev
# @version v1.4.1 (Jul-27-2018)
parse_params ()
{
    local existing_named
    local ARGV=() # un-named params
    local ARGN=() # named params
    local ARGO=() # options (--params)
    echo "local ARGV=(); local ARGN=(); local ARGO=();"
    while [[ "$1" != "" ]]; do
        # Escape asterisk to prevent bash asterisk expansion, and quotes to prevent string breakage
        _escaped=${1/\*/\'\"*\"\'}
        _escaped=${_escaped//\'/\\\'}
        _escaped=${_escaped//\"/\\\"}
        # If equals delimited named parameter
        nonspace="[^[:space:]]"
        if [[ "$1" =~ ^${nonspace}${nonspace}*=..* ]]; then
            # Add to named parameters array
            echo "ARGN+=('$_escaped');"
            # key is part before first =
            local _key=$(echo "$1" | cut -d = -f 1)
            # Just add as non-named when key is empty or contains space
            if [[ "$_key" == "" || "$_key" =~ " " ]]; then
                echo "ARGV+=('$_escaped');"
                shift
                continue
            fi
            # val is everything after key and = (protect from param==value error)
            local _val="${1/$_key=}"
            # remove dashes from key name
            _key=${_key//\-}
            # skip when key is empty
            # search for existing parameter name
            if (echo "$existing_named" | grep "\b$_key\b" >/dev/null); then
                # if name already exists then it's a multi-value named parameter
                # re-declare it as an array if needed
                if ! (declare -p _key 2> /dev/null | grep -q 'declare \-a'); then
                    echo "$_key=(\"\$$_key\");"
                fi
                # append new value
                echo "$_key+=('$_val');"
            else
                # single-value named parameter
                echo "local $_key='$_val';"
                existing_named=" $_key"
            fi
        # If standalone named parameter
        elif [[ "$1" =~ ^\-${nonspace}+ ]]; then
            # remove dashes
            local _key=${1//\-}
            # Just add as non-named when key is empty or contains space
            if [[ "$_key" == "" || "$_key" =~ " " ]]; then
                echo "ARGV+=('$_escaped');"
                shift
                continue
            fi
            # Add to options array
            echo "ARGO+=('$_escaped');"
            echo "local $_key=\"$_key\";"
        # non-named parameter
        else
            # Escape asterisk to prevent bash asterisk expansion
            _escaped=${1/\*/\'\"*\"\'}
            echo "ARGV+=('$_escaped');"
        fi
        shift
    done
}

#--------------------------- DEMO OF THE USAGE -------------------------------

show_use ()
{
    eval $(parse_params "$@")
    # --
    echo "${ARGV[0]}" # print first unnamed param
    echo "${ARGV[1]}" # print second unnamed param
    echo "${ARGN[0]}" # print first named param
    echo "${ARG0[0]}" # print first option param (--force)
    echo "$anyparam"  # print --anyparam value
    echo "$k"         # print k=5 value
    echo "${multivalue[0]}" # print first value of multi-value
    echo "${multivalue[1]}" # print second value of multi-value
    [[ "$force" == "force" ]] && echo "\$force is set so let the force be with you"
}

show_use "param 1" --anyparam="my value" param2 k=5 --force --multi-value=test1 --multi-value=test2