JSON本身不允许评论。 推理是完全愚蠢的, 因为你可以使用JSON。本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身 本身提出评论,完全排除推理,和在完全没有正当理由的情况下装入解析器数据空间精确同一结果和潜在问题,如:JSON档案,附有评论。

如果您试图在(使用)//或/* */或#举例说 ) , 那么有些分析师会失败, 因为这严格地说不在JSON 的规格之内。 所以您应该从未这样做。

例如,这里,这里,这里,这里,我的图像处理系统已保存图像标记和一些基本格式化(注释)信息( 在底部) :

{
    "Notations": [
        {
            "anchorX": 333,
            "anchorY": 265,
            "areaMode": "Ellipse",
            "extentX": 356,
            "extentY": 294,
            "opacity": 0.5,
            "text": "Elliptical area on top",
            "textX": 333,
            "textY": 265,
            "title": "Notation 1"
        },
        {
            "anchorX": 87,
            "anchorY": 385,
            "areaMode": "Rectangle",
            "extentX": 109,
            "extentY": 412,
            "opacity": 0.5,
            "text": "Rect area\non bottom",
            "textX": 98,
            "textY": 385,
            "title": "Notation 2"
        },
        {
            "anchorX": 69,
            "anchorY": 104,
            "areaMode": "Polygon",
            "extentX": 102,
            "extentY": 136,
            "opacity": 0.5,
            "pointList": [
                {
                    "i": 0,
                    "x": 83,
                    "y": 104
                },
                {
                    "i": 1,
                    "x": 69,
                    "y": 136
                },
                {
                    "i": 2,
                    "x": 102,
                    "y": 132
                },
                {
                    "i": 3,
                    "x": 83,
                    "y": 104
                }
            ],
            "text": "Simple polygon",
            "textX": 85,
            "textY": 104,
            "title": "Notation 3"
        }
    ],
    "imageXW": 512,
    "imageYW": 512,
    "imageName": "lena_std.ato",
    "tinyDocs": {
        "c01": "JSON image notation data:",
        "c02": "-------------------------",
        "c03": "",
        "c04": "This data contains image notations and related area",
        "c05": "selection information that provides a means for an",
        "c06": "image gallery to display notations with elliptical,",
        "c07": "rectangular, polygonal or freehand area indications",
        "c08": "over an image displayed to a gallery visitor.",
        "c09": "",
        "c10": "X and Y positions are all in image space. The image",
        "c11": "resolution is given as imageXW and imageYW, which",
        "c12": "you use to scale the notation areas to their proper",
        "c13": "locations and sizes for your display of the image,",
        "c14": "regardless of scale.",
        "c15": "",
        "c16": "For Ellipses, anchor is the  center of the ellipse,",
        "c17": "and the extents are the X and Y radii respectively.",
        "c18": "",
        "c19": "For Rectangles, the anchor is the top left and the",
        "c20": "extents are the bottom right.",
        "c21": "",
        "c22": "For Freehand and Polygon area modes, the pointList",
        "c23": "contains a series of numbered XY points. If the area",
        "c24": "is closed, the last point will be the same as the",
        "c25": "first, so all you have to be concerned with is drawing",
        "c26": "lines between the points in the list. Anchor and extent",
        "c27": "are set to the top left and bottom right of the indicated",
        "c28": "region, and can be used as a simplistic rectangular",
        "c29": "detect for the mouse hover position over these types",
        "c30": "of areas.",
        "c31": "",
        "c32": "The textx and texty positions provide basic positioning",
        "c33": "information to help you locate the text information",
        "c34": "in a reasonable location associated with the area",
        "c35": "indication.",
        "c36": "",
        "c37": "Opacity is a value between 0 and 1, where .5 represents",
        "c38": "a 50% opaque backdrop and 1.0 represents a fully opaque",
        "c39": "backdrop. Recommendation is that regions be drawn",
        "c40": "only if the user hovers the pointer over the image,",
        "c41": "and that the text associated with the regions be drawn",
        "c42": "only if the user hovers the pointer over the indicated",
        "c43": "region."
    }
}

这是我在Google 火底文件允许你对JSON发表评论:

{
  "//": "Some browsers will use this to enable push notifications.",
  "//": "It is the same for all projects, this is not your project's sender ID",
  "gcm_sender_id": "1234567890"
}

没有 No.

JSON 仅限数据。 如果您包含一个注释, 那么它也一定是数据 。

您可以使用指定数据元素"_comment"使用JSON数据的应用程序应该忽略(或某事)这一点。

在产生/接收JSON的进程中,你最好有评论,因为他们应该知道JSON的数据会是什么,或者至少知道它的结构。

但如果你决定:

{
   "_comment": "comment text goes here...",
   "glossary": {
      "title": "example glossary",
      "GlossDiv": {
         "title": "S",
         "GlossList": {
            "GlossEntry": {
               "ID": "SGML",
               "SortAs": "SGML",
               "GlossTerm": "Standard Generalized Markup Language",
               "Acronym": "SGML",
               "Abbrev": "ISO 8879:1986",
               "GlossDef": {
                  "para": "A meta-markup language, used to create markup languages such as DocBook.",
                  "GlossSeeAlso": ["GML", "XML"]
               },
               "GlossSee": "markup"
            }
         }
      }
   }
}

如果您的文本文件, 即 JSON 字符串, 将会被某个程序读取, 使用 C 或 C++ 样式之前要删除 C 或 C+ 样式的注释会有多困难 ?

答复:这将是一个班轮。 如果您这样做, JSON 文件可以用作配置文件 。

将JSON项目切成部分... ...我添加了"不切实际的评论"的行:

{

"#############################" : "Part1",

"data1"             : "value1",
"data2"             : "value2",

"#############################" : "Part2",

"data4"             : "value3",
"data3"             : "value4"

}

实际的答案:视觉工作室代码2019年的用户将使用“ jsonc” 扩展名 。

这是切合实际的,因为这是视觉演播室代码所认可的延伸,以表明“JSON与评论”,请在下面的评论中告诉我其他编辑/编辑的情况。

如果视觉演播室代码和其他编辑也会加入当地对JSON5的支持,

(我在张贴前搜索了所有答案,