Solution for changing the foreground and background colors and writing without new lines. It does not create any temporary files. No special editors are required, so Notepad can be used for editing. The first parameter for the :color subroutine is the color code, the rest of the (optional) parameters are the text to display. If the last parameter is $ then a new line is written at the end. The color codes are the same as for the color command. The :echo subroutine can be used to display a text without new line (unlike regular echo).

@echo off
call :color 4
call :echo Red foreground
call :color 7 " and "
call :color 4f
echo Red background

call :color 
echo Back to normal

call :color 70 "Black "
call :color 1 "Blue "
call :color 2 "Green "
call :color 3 "Aqua "
call :color 4 "Red "
call :color 5 "Purple "
call :color 6 "Yellow "
call :color 7 "White "
call :color 8 "Gray "
call :color 9 "LightBlue" $
call :color a "LightGreen "
call :color b "LightAqua "
call :color c "LightRed "
call :color d "LightPurple "
call :color e "LightYellow "
call :color f "BrightWhite " $

call :color 1f Blue back
call :color 2f Green back
call :color 3f Aqua back
call :color 4f Red back
call :color 5f Purple back
call :color 6f Yellow back
call :color 7f White back
call :color 8f Gray back
call :color 9f "LightBlue back" $
call :color a0 LightGreen back
call :color b0 LightAqua back
call :color c0 LightRed back
call :color d0 LightPurple back
call :color e0 LightYellow back
call :color f0 LightWhite back $

call :color
echo %ESC%[4mUnderline%ESC%[0m.
pause 


goto :eof

:: Displays a text without new line at the end (unlike echo)
:echo
@<nul set /p ="%*"
@goto :eof

:: Change color to the first parameter (same codes as for the color command) 
:: And display the other parameters (write $ at the end for new line)
:color
@echo off
IF [%ESC%] == [] for /F %%a in ('echo prompt $E ^| cmd') do set "ESC=%%a"
SET color=0%1
IF [%color%] == [0] SET color=07
SET fore=%color:~-1%
SET back=%color:~-2,1% 
SET color=%ESC%[
if %fore% LEQ 7 (
  if %fore% == 0 SET color=%ESC%[30
  if %fore% == 1 SET color=%ESC%[34
  if %fore% == 2 SET color=%ESC%[32
  if %fore% == 3 SET color=%ESC%[36
  if %fore% == 4 SET color=%ESC%[31
  if %fore% == 5 SET color=%ESC%[35
  if %fore% == 6 SET color=%ESC%[33
  if %fore% == 7 SET color=%ESC%[37
) ELSE (
  if %fore% == 8 SET color=%ESC%[90
  if %fore% == 9  SET color=%ESC%[94
  if /i %fore% == a SET color=%ESC%[92
  if /i %fore% == b SET color=%ESC%[96
  if /i %fore% == c SET color=%ESC%[91
  if /i %fore% == d SET color=%ESC%[95
  if /i %fore% == e SET color=%ESC%[93
  if /i %fore% == f SET color=%ESC%[97
)
if %back% == 0 (SET color=%color%;40) ELSE (
  if %back% == 1 SET color=%color%;44
  if %back% == 2 SET color=%color%;42
  if %back% == 3 SET color=%color%;46
  if %back% == 4 SET color=%color%;41
  if %back% == 5 SET color=%color%;45
  if %back% == 6 SET color=%color%;43
  if %back% == 7 SET color=%color%;47
  if %back% == 8 SET color=%color%;100
  if %back% == 9  SET color=%color%;104
  if /i %back% == a SET color=%color%;102
  if /i %back% == b SET color=%color%;106
  if /i %back% == c SET color=%color%;101
  if /i %back% == d SET color=%color%;105
  if /i %back% == e SET color=%color%;103
  if /i %back% == f SET color=%color%;107
)
SET color=%color%m
:repeatcolor
if [%2] NEQ [$] SET color=%color%%~2
shift
if [%2] NEQ [] if [%2] NEQ [$] SET color=%color% & goto :repeatcolor
if [%2] EQU [$] (echo %color%) else (<nul set /p ="%color%")
goto :eof

在powershell中为日志语句设置颜色并不是什么大问题。 你可以使用-ForegroundColor参数。

写一个确认消息。

Write-Host "Process executed Successfully...." -ForegroundColor Magenta

写入错误消息。

Write-Host "Sorry an unexpected error occurred.." -ForegroundColor Red

写一个进度消息。

Write-Host "Working under pocess..." -ForegroundColor Green

有一个公认的答案，已经有超过250个赞了。我仍然在贡献的原因是，许多编辑器(例如，我正在使用MS Code)不接受回显所需的转义字符，所有其他解决方案都需要一些第三方(非windows默认)软件。

只使用普通批处理命令的解决方法是使用PROMPT而不是ECHO。PROMPT命令以任何编辑器友好的方式接受转义字符作为$Echaracter序列。(简单地替换ASCII转义码中的Esc)与$E。

下面是一个演示代码:

@ECHO OFF

    :: Do not pollute environment with the %prompt.bak% variable
    :: ! forgetting ENDLOCAL at the end of the batch leads to prompt corruption
    SETLOCAL

    :: Old prompt settings backup
    SET prompt.bak=%PROMPT%

    :: Entering the "ECHO"-like section

        :: Forcing prompt to display after every command (see below)
        ECHO ON

        :: Setting the prompt using the ANSI Escape sequence(s)
        :: - Always start with $E[1A, otherwise the text would appear on a next line
        :: - Then the decorated text follows
        :: - And it all ends with $E30;40m, which makes the following command invisible
        ::   - assuming default background color of the screen
        @ PROMPT $E[1A$E[30;42mHELLO$E[30;40m

        :: An "empty" command that forces the prompt to display. 
        :: The word "rem" is displayed along with the prompt text but is made invisible
        rem

        :: Just another text to display
        @ PROMPT $E[1A$E[33;41mWORLD$E[30;40m
        rem

        :: Leaving the "ECHO"-like section
        @ECHO OFF

    :: Or a more readable version utilizing the cursor manipulation ASCII ESC sequences

        :: the initial sequence
        PROMPT $E[1A
        :: formating commands
        PROMPT %PROMPT%$E[32;44m
        :: the text
        PROMPT %PROMPT%This is an "ECHO"ed text...
        :: new line; 2000 is to move to the left "a lot"
        PROMPT %PROMPT%$E[1B$E[2000D
        :: formating commands fro the next line
        PROMPT %PROMPT%$E[33;47m
        :: the text (new line)
        PROMPT %PROMPT%...spreading over two lines
        :: the closing sequence
        PROMPT %PROMPT%$E[30;40m

        :: Looks like this without the intermediate comments:
        :: PROMPT $E[1A
        :: PROMPT %PROMPT%$E[32;44m
        :: PROMPT %PROMPT%This is an "ECHO"ed text...
        :: PROMPT %PROMPT%$E[1B$E[2000D
        :: PROMPT %PROMPT%$E[33;47m
        :: PROMPT %PROMPT%...spreading over two lines
        :: PROMPT %PROMPT%$E[30;40m

        :: show it all at once!
        ECHO ON
        rem
        @ECHO OFF

    :: End of "ECHO"-ing

    :: Setting prompt back to its original value
    :: - We prepend the settings with $E[37;40m in case
    ::   the original prompt settings do not specify color
    ::   (as they don't by default).
    :: - If they do, the $E[37;40m will become overridden, anyway.
    :: ! It is important to write this command 
    ::   as it is with `ENDLOCAL` and in the `&` form.
    ENDLOCAL & PROMPT $E[37;40m%prompt.bak%

EXIT /B 0

注意:唯一的缺点是，如果不明确地知道，这种技术与用户cmd颜色设置(颜色命令或设置)发生冲突。

——希望这能有所帮助，因为这是我在开头提到的原因唯一可以接受的解决方案。--

编辑:

根据评论，我附上另一个受@Jeb启发的片段。它:

演示如何获取和使用“Esc”字符运行时(而不是将其输入到编辑器中)(Jeb的解决方案) 使用“本机”ECHO命令 因此它不会影响本地PROMPT值 演示了给ECHO输出上色不可避免地会影响PROMPT颜色，所以颜色必须重置

@ECHO OFF

    :: ! To observe color effects on prompt below in this script
    ::   run the script from a fresh cmd window with no custom
    ::   prompt settings

    :: Only not to pollute the environment with the %\e% variable (see below)
    :: Not needed because of the `PROMPT` variable
    SETLOCAL

        :: Parsing the `escape` character (ASCII 27) to a %\e% variable
        :: Use %\e% in place of `Esc` in the [http://ascii-table.com/ansi-escape-sequences.php]
        FOR /F "delims=#" %%E IN ('"prompt #$E# & FOR %%E IN (1) DO rem"') DO SET "\e=%%E"

        :: Demonstrate that prompt did not get corrupted by the previous FOR
        ECHO ON
        rem : After for
        @ECHO OFF

        :: Some fancy ASCII ESC staff
        ECHO [          ]
        FOR /L %%G IN (1,1,10) DO (
            TIMEOUT /T 1 > NUL
            ECHO %\e%[1A%\e%[%%GC%\e%[31;43m.
            ECHO %\e%[1A%\e%[11C%\e%[37;40m]
        )

        :: ECHO another decorated text
        :: - notice the `%\e%[30C` cursor positioning sequence
        ::   for the sake of the "After ECHO" test below
        ECHO %\e%[1A%\e%[13C%\e%[32;47mHELLO WORLD%\e%[30C

        :: Demonstrate that prompt did not get corrupted by ECHOing
        :: neither does the cursor positioning take effect.
        :: ! But the color settings do.
        ECHO ON
        rem : After ECHO
        @ECHO OFF

    ENDLOCAL

    :: Demonstrate that color settings do not reset
    :: even when out of the SETLOCAL scope
    ECHO ON
    rem : After ENDLOCAL
    @ECHO OFF

    :: Reset the `PROMPT` color
    :: - `PROMPT` itself is untouched so we did not need to backup it.
    :: - Still ECHOING in color apparently collide with user color cmd settings (if any).
    :: ! Resetting `PROMPT` color this way extends the `PROMPT`
    ::   by the initial `$E[37;40m` sequence every time the script runs.
    :: - Better solution then would be to end every (or last) `ECHO` command
    ::   with the `%\e%[37;40m` sequence and avoid setting `PROMPT` altogether.
    ::   which makes this technique preferable to the previous one (before EDIT)
    :: - I am keeping it this way only to be able to
    ::   demonstrate the `ECHO` color effects on the `PROMPT` above.
    PROMPT $E[37;40m%PROMPT%

    ECHO ON
    rem : After PROMPT color reset
    @ECHO OFF

EXIT /B 0

对我来说，我找到了一些解决方案:这是一个有效的解决方案

     @echo off
    title a game for youtube 
explorer "https://thepythoncoding.blogspot.com/2020/11/how-to-echo-with-different-colors-in.html"
    SETLOCAL EnableDelayedExpansion
    for /F "tokens=1,2 delims=#" %%a in ('"prompt #$H#$E# & echo on & for %%b in (1) do rem"') do (
      set "DEL=%%a"
    )
    echo say the name of the colors, don't read
    
    call :ColorText 0a "blue"
    call :ColorText 0C "green"
    call :ColorText 0b "red"
    echo(
    call :ColorText 19 "yellow" 
    call :ColorText 2F "black"
    call :ColorText 4e "white"
    
    goto :Beginoffile
    
    :ColorText
    echo off
    <nul set /p ".=%DEL%" > "%~2"
    findstr /v /a:%1 /R "^$" "%~2" nul
    del "%~2" > nul 2>&1
    goto :eof
    
    :Beginoffile

我刚从Win 7 Home转换到Win 10 Pro，想要替换我从其他批次调用的批量，以颜色回显信息。回顾上面讨论的内容，我使用以下内容，这将直接取代我的前一批。注意在消息中添加“~”，可以使用带有空格的消息。我不用记住代码，而是用字母来代表我需要的颜色。

如果%2包含空格，则需要“…” 黑色底色:R=红色G=绿色Y=黄色W=白色

ECHO OFF
IF "%1"=="R" ECHO ^[91m%~2[0m
IF "%1"=="G" ECHO ^[92m%~2[0m
IF "%1"=="Y" ECHO ^[93m%~2[0m
IF "%1"=="W" ECHO ^[97m%~2[0m

另一种选择是使用NodeJS。

这里有一个例子:

const os = require('os');
const colors = require('colors');

console.log("Operative System:".green,os.type(),os.release());
console.log("Uptime:".blue,os.uptime());

这就是结果: