我对cmd中缺乏适当的着色感到恼火，所以我继续创建cmdcolor。它只是一个标准输出代理，它寻找一组有限的ANSI/VT100控制序列(换句话说，就像在bash中)，即echo \033[31m RED \033[0m DEFAULT | cmdcolor.exe。

使用和下载。

一个高级宏处理光标颜色，位置和属性的Windows 10。 有关使用方法的信息，请参阅帮助和使用示例。

支持和显示的例子:

Cursor Positioning Absolute Relative to last Cursor Position ; left right by n columns ; up down by n lines Combinations of Relative and Absolute Position. Show / Hide Cursor Cursor Graphics properties [ Color ; Foreground and Background ] Same line multicolor output Easily chain multiple VT graphics sequences. Clearing of all text on a line from a given position. Deletion of a number of characters to the right of the cursor on the current line. Optionally Save the Cursor position at the time of expansion as independent Y and X values. /Save Cursor position storing component of the macro adpated from Jeb's answer here NEW: Switching between Screen buffers.

Edit: I've included below the final usage example a command line that uses VT codes to achieve the same result as that example, to illustrate the difference in readability when using multiple Terminal sequences in the same Cursor output. NOTES On changing Buffers: Cursor position is tied to the active buffer; It is not availale when switching to an alternate buffer. When reverting to the main buffer: The cursor position originally occupied in the main buffer is restored, and the content of the alternate buffer is discarded.

::: Cout cursor Macro. Author: T3RRY ::: Filename: Cout.bat
::: OS requirement: Windows 10
::: Purpose: Facilitate advanced console display output with the easy use of Virtual terminal codes
::: Uses a macro function to effect display without users needing to memorise or learn specific
::: virtual terminal sequences.
::: Enables output of text in 255 bit color at absolute or relative Y;X positions.
::: Allows cursor to be hidden or shown during and after text output. See help for more info.

@Echo off & Setlocal EnableExtensions
============================================== :# Usage
 If not "%~1" == "" Echo/%~1.|findstr /LIC:"/?" > nul && (
  If "%~2" == "" (Cls &  Mode 1000,50 & Color 30)
  If "%~2" == "Usage" ( Color 04 & ( Echo/n|choice /n /C:o 2> nul ) & timeout /T 5 > nul )
  If "%~2" == "DE" ( Color 04 & Echo/                      --- Delayed expansion detected^^^! Must not be enabled prior to calling %~n0 ---&( Echo/n|choice /n /C:o 2> nul ))
  If not Exist "%TEMP%\%~n0helpfile.~tmp" (For /F "Delims=" %%G in ('Type "%~f0"^| Findstr.exe /BLIC:":::" 2^> nul ')Do (
   For /F "Tokens=2* Delims=[]" %%v in ("%%G")Do Echo(^|%%v^|
  ))>"%TEMP%\%~n0helpfile.~tmp"
  Type "%TEMP%\%~n0helpfile.~tmp" | More
  timeout /T 60 > nul
  Color 07
  If "%~2" == "DE" (Exit)Else Exit /B 1
 )
 If "!![" == "[" Call "%~f0" "/?" "DE"
:::[=====================================================================================================================]
:::[ cout /?                                                                                                             ]
:::[ %COUT% Cursor output macro.                                                                                         ]
:::[ * Valid Args for COUT: {/Y:Argvalue} {/X:Argvalue} {/S:Argvalue} {/C:Argvalue}                                      ]
:::[       - Args Must be encased in curly braces. Arg order does not matter ; Each Arg is optional.                     ]
:::[ * Valid Switches for COUT: /Save /Alt /Main                                                                         ]
:::[ /Save - Stores the Y and X position at the start of the current expansion to .lY and .lX variables                  ]
:::[ /Alt  - Switch console to alternate screen Buffer. Persists until /Main switch is used.                             ]
:::[ /Main - Restore console to main screen Buffer. Console default is the main buffer.                                  ]
:::[                                                                                                                     ]
:::[   USAGE:                                                                                                            ]
:::[ * ArgValue Options ; '#' is an integer:                                                                             ]
:::[   {/Y:up|down|#} {/Y:up#|down#|#} {/Y:#up|#down|#} {/X:left|right|#} {/X:left#|right#|#} {/X:#left|#right|#}        ]
:::[  * note: {/Y:option} {/X:option} - 1 option only per Arg.                                                           ]
:::[        - directions: 'up' 'down' 'left' 'right' are relative to the cursors last position.                          ]
:::[         - /Y and /X options - #direction or direction#:                                                             ]
:::[           Positions the cursor a number of cells from the current position in the given direction.                  ]
:::[           Example; To move the cursor 5 rows up in the same column, without displaying any new text:                ]
:::[            %COUT%{/Y:5up}                                                                                           ]
:::[        - '#' (Absolute position) is the column number {/X:#} or row number {/Y:#} the cursor                        ]
:::[         * Integers for absolute positions contained in variables must be Expanded: {/Y:%varname%}                   ]
:::[           is to be positioned at, allowing cursor position to be set on single or multiple axis.                    ]
:::[         * Absolute Y and X positions capped at line and column maximum of the console display.                      ]
:::[         * Exceeding the maximum Y positions the cursor at the start of the last line in the console display.        ]
:::[         * Exceeding the maximum X positions the cursor at the start of the next line                                ]
:::[                                                                                                                     ]
:::[   {/S:Output String} {/S:(-)Output String} {/S:Output String(+)} {/S:Output String(K)} {/S:Output String(.#.)}      ]
:::[  * note: (-) Hide or (+) Show the Cursor during output of the string.                                               ]
:::[          (K) Clears the row of text from the position (K) occurs.                                                   ]
:::[          Example; Delete 5 characters from the current row to the right of the curser:                              ]
:::[           %COUT%{/S:(.5.)}                                                                                          ]
:::[   {/C:VTcode} {/C:VTcode-VTcode} {/C:VTcode-VTcode-VTcode}                                                          ]
:::[  * note: Chain multiple graphics rendition codes using '-'                                                          ]
:::[  See:      https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences#text-formatting      ]
:::[  See also: https://www.rapidtables.com/web/color/RGB_Color.html                                                     ]
:::[=====================================================================================================================]

============================================== :# PreScript variable definitions

rem /* generate Vitual Terminal Escape Control .Character */
 For /F %%a in ( 'Echo prompt $E ^| cmd' )Do Set "\E=%%a"
rem /* https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences */
(Set \n=^^^

%= Newline variable for macro definitions. DO NOT MODIFY this line or above 2 lines. =%)

================== :# Screen Dimensions [Customise columns,lines using the mode command.]
 Mode 160,38 & Cls
rem /* Get screen dimensions [lines] [columns]. Must be done before delayed expansion is enabled. */
 For /F "tokens=1,2 Delims=:" %%G in ('Mode')Do For %%b in (%%H)Do For %%a in (%%G)Do Set "%%a=%%b"

rem /* NON ENGLISH VERSION USERS: You will need to manually set Columns and lines for their desired console size */
 If not defined columns (Set "columns=100"& Set "lines=30")

rem /* Cursor position codes - https://learn.microsoft.com/en-us/windows/console/console-virtual-terminal-sequences#simple-cursor-positioning */
 Set "left=D"&Set "right=C"&Set "up=A"&set "down=B"
 For /L %%n in (1 1 %lines%)Do (Set "%%ndown=[%%nB"&Set "down%%n=[%%nB"& set "%%nup=[%%nA"&Set "up%%n=[%%nA")
 For /L %%n in (1 1 %columns%)Do (Set "%%nleft=[%%nD"&Set "left%%n=[%%nD"&set "%%nright=[%%nC"&set "right%%n=[%%nC")

%= Catch Args        =%Set COUT=For %%n in (1 2)Do If %%n==2 ( %\n%
%= Test No Args       =%If "!Args!" == "" (CLS^&Echo/Usage Error. Args Required. ^& Call "%~f0" "/?" "Usage" ^|^| Exit /B 1) %\n%
%= Test Braces Used   =%If "!Args:}=!" == "!Args!" (CLS^&Echo/Usage Error. Args must be enclosed in curly braces ^& Call "%~f0" "/?" "Usage" ^|^| Exit /B 1) %\n%
%= Reset macro        =%Set ".Y=" ^& Set ".X=" ^& Set ".Str=" ^& Set ".C=" %\n%
%=  internal vars     =%Set "Arg1=" ^& Set "Arg2=" ^& Set "Arg3=" ^& Set "Arg4=" %\n%
%= Split Args.        =%For /F "Tokens=1,2,3,4 Delims={}" %%1 in ("!Args!")Do ( %\n%
%= Substring           =%Set "Arg1=%%~1" %\n%
%=  modification       =%Set "Arg2=%%~2" %\n%
%=  identifies Args    =%Set "Arg3=%%~3" %\n%
%=  during handling.   =%Set "Arg4=%%~4" %\n%
%=                    =%) %\n%
%= Check /Save switch =%If not "!Args:/Save=!" == "!Args!" (%\n%
%= Reset Cursor Save   =%Set ".Cpos=" ^&Set ".Char="%\n%
%= 10 char max; Repeat =%For /L %%l in (2 1 12)Do (%\n%
%= until R returned     =%If not "!.Char!" == "R" (%\n%
%= from esc[6n          =%^<nul set /p "=%\E%[6n" %\n%
%= Redirects to          =%FOR /L %%z in (1 1 %%l) DO pause ^< CON ^> NUL%\n%
%= prevent blocking      =%Set ".Char=;"%\n%
%= script execution      =%for /F "tokens=1 skip=1 delims=*" %%C in ('"REPLACE /W ? . < con"') DO (Set ".Char=%%C")%\n%
%= Append string w.out R =%If "!.Cpos!" == "" (Set ".Cpos=!.Char!")Else (set ".Cpos=!.Cpos!!.Char:R=!") %\n%
%=                      =%)%\n%
%=                     =%)%\n%
%= Split Captured Pos  =%For /F "tokens=1,2 Delims=;" %%X in ("!.Cpos!")Do Set ".lY=%%X" ^& Set ".LX=%%Y" %\n%
%= End of Pos /Save   =%)%\n%
%= Begin Arg          =%For %%i in (1 2 3 4)Do For %%S in (Y X C S)Do If not "!Arg%%i!" == "" ( %\n%
%= Processing. 4 Args   =%If not "!Arg%%i:/%%S:=!" == "!Arg%%i!" ( %\n%
%= Flagged with Y X C S  =%Set "Arg%%i=!Arg%%i:/%%S:=!" %\n%
%= Strip /Flag In Arg#   =%For %%v in ("!Arg%%i!")Do ( %\n%
%= /Y Lines Arg handling  =%If "%%S" == "Y" ( %\n%
%= Test if arg is variable =%If Not "!%%~v!" == "" ( %\n%
%= assign down / up value   =%Set ".Y=%\E%!%%~v!" %\n%
%= -OR-                    =%)Else ( %\n%
%= assign using operation   =%Set /A ".Y=!Arg%%i!" %\n%
%= to allow use of offsets; =%If !.Y! GEQ !Lines! (Set /A ".Y=Lines-1") %\n%
%= constrained to console   =%Set ".Y=%\E%[!.Y!d" %\n%
%= maximum lines.         =%)) %\n%
%= /X Cols Arg handling   =%If "%%S" == "X" ( %\n%
%= processing follows same =%If Not "!%%~v!" == "" ( %\n%
%= logic as /Y;            =%Set ".X=%\E%!%%~v!" %\n%
%= except if Columns     =%)Else ( %\n%
%= exceed console max     =%Set /A ".X=!Arg%%i!" %\n%
%= columns line wrapping   =%If !.X! GEQ !Columns! (Set ".X=1"^& Set ".Y=%\E%!Down!") %\n%
%= is effected.            =%Set ".X=%\E%[!.X!G" %\n%
%=                       =%)) %\n%
%= /C Color Arg Handling. %If "%%S" == "C" ( %\n%
%= Substituition          =%Set ".C=%\E%[!Arg%%i!" %\n%
%= replaces '-' with VT   =%Set ".C=!.C:-=m%\E%[!" %\n%
%= chain - m\E[           =%Set ".C=!.C!m" %\n%
%=                       =%) %\n%
%= /S String Arg Handle  =%If "%%S" == "S" ( %\n%
%=  Substitute Sub-Args   =%Set ".Str=!Arg%%i!" %\n%
%=  (-) hide cursor        =%Set ".Str=!.Str:(-)=%\E%[?25l!" %\n%
%=  (+) show cursor        =%Set ".Str=!.Str:(+)=%\E%[?25h!" %\n%
%=  (K) clear line         =%Set ".Str=!.Str:(K)=%\E%[K!" %\n%
%=  (.#.) delete # of      =%Set ".Str=!.Str:(.=%\E%[!" %\n%
%=  characters             =%Set ".Str=!.Str:.)=P!" %\n%
%=                       =%) %\n%
%= End Arg Handling   =%))) %\n%
%= /Main /Alt Switch  =%If not "!Args:/Main=!" == "!Args!" ( %\n%
%= handling for       =%^< nul Set /P "=%\E%[?1049l!.Y!!.X!!.C!!.Str!%\E%[0m" %\n%
%= switching console  =%)Else If not "!Args:/Alt=!" == "!Args!" ( %\n%
%= buffers. No Switch =%^< nul Set /P "=%\E%[?1049h!.Y!!.X!!.C!!.Str!%\E%[0m" %\n%
%= outputs to current =%)Else ( ^< nul Set /P "=!.Y!!.X!!.C!!.Str!%\E%[0m" ) %\n%
%= buffer.           =%)Else Set Args=
rem /* Simple subsecond delay macro. Uses call to a non existentent label # number of times to delay script execution. */
 For /F "tokens=1,2 delims==" %%G in ('wmic cpu get maxclockspeed /format:value')Do Set /A "%%G=%%H/20" 2> nul
 If not defined Maxclockspeed Set "Maxclockspeed=200"
 Set "Hash=#"& Set "delay=(If "!Hash!" == "#" (Set /A "Delay.len=Maxclockspeed")Else Set "Delay.len=#")& For /L %%i in (1 1 !Delay.Len!)Do call :[_false-label_] 2> Nul"

============================================== :# Script Body [Demo]
rem /* Enable Delayed Expansion after macro definiton in order to expand macro. */
 Setlocal EnableDelayedExpansion & CD "%TEMP%"
rem /* Usage examples */
 %COUT%{/X:10}{/Y:5}{/C:34}{"/S:(-)hello there^^^!"}
 %Delay%
rem /* Example use of mixed foreground / background color and other graphics rendition properties */
 %COUT%{"/C:31-1-4-48;2;0;80;130"}{/S:Bye for now.}{/Y:down}
 %Delay%
 %COUT%{/Y:up}{/C:35}{/S:again}{/X:16}
 %Delay%
 %COUT%{"/S:(K)^_^"}{/X:right}{/C:32}{/Y:down} /Save
 %Delay%
rem /* Switch to Alternate screen buffer: /Alt */
 %COUT%{"/S:(-)(K)o_o"}{/X:.lX+1}{/Y:6}{/C:33}{/Y:down} /Alt
 %Delay%
 %COUT%{"/S:Don't worry, they'll be back"}{/Y:down}{/X:15left}{/C:7-31}
rem /* Cursor position is tied to the active console buffer. The contents of the Alternate buffer are discarded when reverting to the Main buffer. */
 %Delay%
rem /* Return to Main screen buffer: /Main */
 %COUT%{/X:3left}{/Y:5up}{"/S:That's all folks."} /Save /Main
rem /* Cursor position is tied to the active console buffer. */
 %Delay%
rem /* restore cursor position /Save .lX value with +7 offset ; Overwrite all and delete 6 following characters:(.6.) ; restore cursor: (+) */
     %COUT%{/X:10left}{/S:How(.6.)(+)}{/C:32}
rem /* The same as the above line using VT codes manually. */
 ::: <nul Set /P "=%\E%[10D%\E%[32mHow%\E%[6P%\E%[?25l"
 %Delay%
 %COUT%{/Y:100}
 Endlocal
 Goto :eof

上面这个宏的另一个版本使用了一个更简单、可读性更好的结构来处理参数，可以在这里找到。

Windows 10 - TH2及以上版本:

(a.k.a Version 1511, build 10586, release 2015-11-10)

在命令提示符:

echo ^[[32m HI ^[[0m

使用实际按键:echo Ctrl+[[32m HI Ctrl+[[0mEnter .

您应该在它下面看到一个绿色的“HI”。

代码可以在这里找到:

https://en.wikipedia.org/wiki/ANSI_escape_code#Colors

记事本:

要保存到记事本，你可以用Alt+027和numpad键入ESC，然后[32m部分。当我使用笔记本电脑时，另一个技巧是将上面的行重定向到一个文件中，然后剪切和粘贴:

echo echo ^[[32m HI ^[[0m >> batch_file.cmd

最简单的方法是像这样对powershell进行系统调用:

s=os.system('powershell Write-Host "I am so bored with this. Work already" -ForegroundColor Blue')

否则:

←[94mPff

您可以用要打印的单词的名称创建文件，使用findstr(可以彩色打印)，然后擦除该文件。试试这个例子:

@echo off
SETLOCAL EnableDelayedExpansion
for /F "tokens=1,2 delims=#" %%a in ('"prompt #$H#$E# & echo on & for %%b in (1) do rem"') do (
  set "DEL=%%a"
)

call :ColorText 0a "green"
call :ColorText 0C "red"
call :ColorText 0b "cyan"
echo(
call :ColorText 19 "blue"
call :ColorText 2F "white"
call :ColorText 4e "yellow"

goto :eof

:ColorText
echo off
<nul set /p ".=%DEL%" > "%~2"
findstr /v /a:%1 /R "^$" "%~2" nul
del "%~2" > nul 2>&1
goto :eof

运行color /?得到一个颜色列表。

自Windows XP以来，通过使用PowerShell作为通过命名管道链接到控制台输出的子进程，可以快速有效地用cmd批处理着色。这也可以用FindStr来完成，但是PowerShell提供了更多的选项，而且似乎更快。

保持PowerShell为子进程，使用管道进行通信的主要好处是，显示要比为每一行显示启动PowerShell或FindStr快得多。

其他优点:

不需要临时文件 通过管道进行回显允许显示完整的ASCII表而不需要转义。 与fd重定向工作良好。以stderr为例，或者重定向到一个文件/其他进程。

下面是一个示例代码:

::
:: Launch a PowerShell child process in the background linked to the console and 
:: earing through named pipe PowerShellCon_%PID%
::
:: Parameters :
::   [ PID ] : Console Process ID used as an identifier for the named pipe, launcher PID by default.
::   [ timeout ] : Subprocess max life in seconds, 300 by default. If -1, the subprocess
::                  will not terminate while the process %PID% is still alive.
:: Return :
::   0 if the child PowerShell has been successfully launched and the named pipe is available.
::   1 if it fails.
::   2 if we can't get a PID.
::   3 if PowerShell is not present or doesn't work.
::
:LaunchPowerShellSubProcess
  SET LOCALV_PID=
  SET LOCALV_TIMEOUT=300
  IF NOT "%~1" == "" SET LOCALV_PID=%~1
  IF NOT "%~2" == "" SET LOCALV_TIMEOUT=%~2
  powershell -command "$_" 2>&1 >NUL
  IF NOT "!ERRORLEVEL!" == "0" EXIT /B 3
  IF "!LOCALV_PID!" == "" (
    FOR /F %%P IN ('powershell -command "$parentId=(Get-WmiObject Win32_Process -Filter ProcessId=$PID).ParentProcessId; write-host (Get-WmiObject Win32_Process -Filter ProcessId=$parentId).ParentProcessId;"') DO (
      SET LOCALV_PID=%%P
    )
  )
  IF "!LOCALV_PID!" == "" EXIT /B 2
  START /B powershell -command "$cmdPID=$PID; Start-Job -ArgumentList $cmdPID -ScriptBlock { $ProcessActive = $true; $timeout=!LOCALV_TIMEOUT!; while((!LOCALV_TIMEOUT! -eq -1 -or $timeout -gt 0) -and $ProcessActive) { Start-Sleep -s 1; $timeout-=1; $ProcessActive = Get-Process -id !LOCALV_PID! -ErrorAction SilentlyContinue; } if ($timeout -eq 0 -or ^! $ProcessActive) { Stop-Process -Id $args; } } | Out-Null ; $npipeServer = new-object System.IO.Pipes.NamedPipeServerStream('PowerShellCon_!LOCALV_PID!', [System.IO.Pipes.PipeDirection]::In); Try { $npipeServer.WaitForConnection(); $pipeReader = new-object System.IO.StreamReader($npipeServer); while(($msg = $pipeReader.ReadLine()) -notmatch 'QUIT') { $disp='write-host '+$msg+';'; invoke-expression($disp); $npipeServer.Disconnect(); $npipeServer.WaitForConnection(); }; } Finally { $npipeServer.Dispose(); }" 2>NUL
  SET /A LOCALV_TRY=20 >NUL
  :LaunchPowerShellSubProcess_WaitForPipe
  powershell -nop -c "& {sleep -m 50}"
  SET /A LOCALV_TRY=!LOCALV_TRY! - 1 >NUL
  IF NOT "!LOCALV_TRY!" == "0" cmd /C "ECHO -NoNewLine|MORE 1>\\.\pipe\PowerShellCon_!LOCALV_PID!" 2>NUL || GOTO:LaunchPowerShellSubProcess_WaitForPipe
  IF "!LOCALV_TRY!" == "0" EXIT /B 1
  EXIT /B 0

这个“代码”是用延迟展开ON编写的，但可以重写为没有它的情况下工作。有很多安全要点需要考虑，不要在野外直接使用。

如何使用:

@ECHO OFF
SETLOCAL ENABLEEXTENSIONS
IF ERRORLEVEL 1 (
  ECHO Extension inapplicable
  EXIT /B 1
)
::
SETLOCAL ENABLEDELAYEDEXPANSION
IF ERRORLEVEL 1 (
  ECHO Expansion inapplicable
  EXIT /B 1
)
CALL:LaunchPowerShellSubProcess
IF NOT ERRORLEVEL 0 EXIT /B 1
CALL:Color Cyan "I write this in Cyan"
CALL:Blue "I write this in Blue"
CALL:Green "And this in green"
CALL:Red -nonewline "And mix Red"
CALL:Yellow "with Yellow"
CALL:Green "And not need to trouble with ()<>&|;,%""^ and so on..."
EXIT /B 0
:Color
ECHO -foregroundcolor %*>\\.\pipe\PowerShellCon_!LOCALV_PID!
ECHO[|SET /P=>NUL
GOTO:EOF
:Blue
ECHO -foregroundcolor Blue %*>\\.\pipe\PowerShellCon_!LOCALV_PID!
ECHO[|SET /P=>NUL
GOTO:EOF
:Green
ECHO -foregroundcolor Green %*>\\.\pipe\PowerShellCon_!LOCALV_PID!
ECHO[|SET /P=>NUL
GOTO:EOF
:Red
ECHO -foregroundcolor Red %*>\\.\pipe\PowerShellCon_!LOCALV_PID!
ECHO[|SET /P=>NUL
GOTO:EOF
:Yellow
ECHO -foregroundcolor Yellow %*>\\.\pipe\PowerShellCon_!LOCALV_PID!
ECHO[|SET /P=>NUL
GOTO:EOF
::
:: Launch a PowerShell child process in the background linked to the console and 
:: earing through named pipe PowerShellCon_%PID%
::
:: Parameters :
::   [ PID ] : Console Process ID used as an identifier for the named pipe, launcher PID by default.
::   [ timeout ] : Subprocess max life in seconds, 300 by default. If -1, the subprocess
::                  will not terminate while the process %PID% is still alive.
:: Return :
::   0 if the child PowerShell has been successfully launched and the named pipe is available.
::   1 if it fails.
::   2 if we can't get a PID.
::   3 if PowerShell is not present or doesn't work.
::
:LaunchPowerShellSubProcess
  SET LOCALV_PID=
  SET LOCALV_TIMEOUT=300
  IF NOT "%~1" == "" SET LOCALV_PID=%~1
  IF NOT "%~2" == "" SET LOCALV_TIMEOUT=%~2
  powershell -command "$_" 2>&1 >NUL
  IF NOT "!ERRORLEVEL!" == "0" EXIT /B 3
  IF "!LOCALV_PID!" == "" (
    FOR /F %%P IN ('powershell -command "$parentId=(Get-WmiObject Win32_Process -Filter ProcessId=$PID).ParentProcessId; write-host (Get-WmiObject Win32_Process -Filter ProcessId=$parentId).ParentProcessId;"') DO (
      SET LOCALV_PID=%%P
    )
  )
  IF "!LOCALV_PID!" == "" EXIT /B 2
  START /B powershell -command "$cmdPID=$PID; Start-Job -ArgumentList $cmdPID -ScriptBlock { $ProcessActive = $true; $timeout=!LOCALV_TIMEOUT!; while((!LOCALV_TIMEOUT! -eq -1 -or $timeout -gt 0) -and $ProcessActive) { Start-Sleep -s 1; $timeout-=1; $ProcessActive = Get-Process -id !LOCALV_PID! -ErrorAction SilentlyContinue; } if ($timeout -eq 0 -or ^! $ProcessActive) { Stop-Process -Id $args; } } | Out-Null ; $npipeServer = new-object System.IO.Pipes.NamedPipeServerStream('PowerShellCon_!LOCALV_PID!', [System.IO.Pipes.PipeDirection]::In); Try { $npipeServer.WaitForConnection(); $pipeReader = new-object System.IO.StreamReader($npipeServer); while(($msg = $pipeReader.ReadLine()) -notmatch 'QUIT') { $disp='write-host '+$msg+';'; invoke-expression($disp); $npipeServer.Disconnect(); $npipeServer.WaitForConnection(); }; } Finally { $npipeServer.Dispose(); }" 2>NUL
  SET /A LOCALV_TRY=20 >NUL
  :LaunchPowerShellSubProcess_WaitForPipe
  powershell -nop -c "& {sleep -m 50}"
  SET /A LOCALV_TRY=!LOCALV_TRY! - 1 >NUL
  IF NOT "!LOCALV_TRY!" == "0" cmd /C "ECHO -NoNewLine|MORE 1>\\.\pipe\PowerShellCon_!LOCALV_PID!" 2>NUL || GOTO:LaunchPowerShellSubProcess_WaitForPipe
  IF "!LOCALV_TRY!" == "0" EXIT /B 1
  EXIT /B 0

链接到我在同一主题上的原始答案。