在模板函数中围绕枢轴使用老式的3-step-xor技巧进行字节交换，提供了一个灵活、快速的O(ln2)解决方案，不需要库，这里的风格也拒绝1字节类型:

template<typename T>void swap(T &t){
    for(uint8_t pivot = 0; pivot < sizeof(t)/2; pivot ++){
        *((uint8_t *)&t + pivot) ^= *((uint8_t *)&t+sizeof(t)-1- pivot);
        *((uint8_t *)&t+sizeof(t)-1- pivot) ^= *((uint8_t *)&t + pivot);
        *((uint8_t *)&t + pivot) ^= *((uint8_t *)&t+sizeof(t)-1- pivot);
    }
}

如果你这样做是为了网络/主机兼容性，你应该使用:

ntohl() //Network to Host byte order (Long)
htonl() //Host to Network byte order (Long)

ntohs() //Network to Host byte order (Short)
htons() //Host to Network byte order (Short)

如果是出于其他原因，这里提供的byte_swap解决方案之一也可以很好地工作。

查找位移位，因为这基本上是所有你需要做的交换从小->大端dian。然后根据位的大小，改变位移位的方式。

摘自Rob Pike的《字节顺序谬误》:

假设数据流有一个小端编码的32位整数。下面是如何提取它(假设无符号字节):

i = (data[0]<<0) | (data[1]<<8) | (data[2]<<16) | ((unsigned)data[3]<<24);

如果它是big-endian，下面是如何提取它:

i = (data[3]<<0) | (data[2]<<8) | (data[1]<<16) | ((unsigned)data[0]<<24);

TL;DR:不要担心你的平台原生顺序，重要的是你从中读取的流的字节顺序，你最好希望它是定义良好的。

注1:这里int和unsigned int是32位，否则类型可能需要调整。

注2:最后一个字节必须在移位前显式转换为unsigned，因为默认情况下它被提升为int，移位24位意味着操作符号位，这是未定义行为。

我从这篇文章中得到了一些建议，并把它们放在一起形成了这个:

#include <boost/type_traits.hpp>
#include <boost/static_assert.hpp>
#include <boost/detail/endian.hpp>
#include <stdexcept>
#include <cstdint>

enum endianness
{
    little_endian,
    big_endian,
    network_endian = big_endian,
    
    #if defined(BOOST_LITTLE_ENDIAN)
        host_endian = little_endian
    #elif defined(BOOST_BIG_ENDIAN)
        host_endian = big_endian
    #else
        #error "unable to determine system endianness"
    #endif
};

namespace detail {

template<typename T, size_t sz>
struct swap_bytes
{
    inline T operator()(T val)
    {
        throw std::out_of_range("data size");
    }
};

template<typename T>
struct swap_bytes<T, 1>
{
    inline T operator()(T val)
    {
        return val;
    }
};

template<typename T>
struct swap_bytes<T, 2>
{
    inline T operator()(T val)
    {
        return ((((val) >> 8) & 0xff) | (((val) & 0xff) << 8));
    }
};

template<typename T>
struct swap_bytes<T, 4>
{
    inline T operator()(T val)
    {
        return ((((val) & 0xff000000) >> 24) |
                (((val) & 0x00ff0000) >>  8) |
                (((val) & 0x0000ff00) <<  8) |
                (((val) & 0x000000ff) << 24));
    }
};

template<>
struct swap_bytes<float, 4>
{
    inline float operator()(float val)
    {
        uint32_t mem =swap_bytes<uint32_t, sizeof(uint32_t)>()(*(uint32_t*)&val);
        return *(float*)&mem;
    }
};

template<typename T>
struct swap_bytes<T, 8>
{
    inline T operator()(T val)
    {
        return ((((val) & 0xff00000000000000ull) >> 56) |
                (((val) & 0x00ff000000000000ull) >> 40) |
                (((val) & 0x0000ff0000000000ull) >> 24) |
                (((val) & 0x000000ff00000000ull) >> 8 ) |
                (((val) & 0x00000000ff000000ull) << 8 ) |
                (((val) & 0x0000000000ff0000ull) << 24) |
                (((val) & 0x000000000000ff00ull) << 40) |
                (((val) & 0x00000000000000ffull) << 56));
    }
};

template<>
struct swap_bytes<double, 8>
{
    inline double operator()(double val)
    {
        uint64_t mem =swap_bytes<uint64_t, sizeof(uint64_t)>()(*(uint64_t*)&val);
        return *(double*)&mem;
    }
};

template<endianness from, endianness to, class T>
struct do_byte_swap
{
    inline T operator()(T value)
    {
        return swap_bytes<T, sizeof(T)>()(value);
    }
};
// specialisations when attempting to swap to the same endianess
template<class T> struct do_byte_swap<little_endian, little_endian, T> { inline T operator()(T value) { return value; } };
template<class T> struct do_byte_swap<big_endian,    big_endian,    T> { inline T operator()(T value) { return value; } };

} // namespace detail

template<endianness from, endianness to, class T>
inline T byte_swap(T value)
{
    // ensure the data is only 1, 2, 4 or 8 bytes
    BOOST_STATIC_ASSERT(sizeof(T) == 1 || sizeof(T) == 2 || sizeof(T) == 4 || sizeof(T) == 8);
    // ensure we're only swapping arithmetic types
    BOOST_STATIC_ASSERT(boost::is_arithmetic<T>::value);

    return detail::do_byte_swap<from, to, T>()(value);
}

然后你可以这样使用它:

// swaps val from host-byte-order to network-byte-order
auto swapped = byte_swap<host_endian, network_endian>(val);

反之亦然

// swap a value received from the network into host-byte-order
auto val = byte_swap<network_endian, host_endian>(val_from_network);

简单地说:

#include <climits>

template <typename T>
T swap_endian(T u)
{
    static_assert (CHAR_BIT == 8, "CHAR_BIT != 8");

    union
    {
        T u;
        unsigned char u8[sizeof(T)];
    } source, dest;

    source.u = u;

    for (size_t k = 0; k < sizeof(T); k++)
        dest.u8[k] = source.u8[sizeof(T) - k - 1];

    return dest.u;
}

用法:swap_endian < uint32_t >(42)。