如果你是通过编程而不是web。配置它:

new WebHttpBinding(WebHttpSecurityMode.Transport)

需要记住的是，配置文件可以拆分到次要文件中，以便在不同的服务器(开发/演示/生产等)上更容易地更改配置，而不必重新编译代码/应用程序等。 例如，我们使用它们允许现场工程师在不实际接触“真实”文件的情况下进行端点更改。

第一步是将绑定部分从WPF App.Config移出到它自己的单独文件中。

行为部分被设置为允许http和https(如果两者都被允许，似乎对应用程序没有影响)

<serviceMetadata httpsGetEnabled="true" httpGetEnabled="true" />

我们把绑定部分移到它自己的文件中;

 <bindings configSource="Bindings.config" /> 

在绑定中。配置文件基于协议进行安全切换

  <!-- None = http:// -->
  <!-- Transport = https:// -->
  <security mode="None" >

现在现场工程师只需要更改绑定。配置文件和客户端。配置中存储每个端点的实际URL。

通过这种方式，我们可以将端点从http更改为https，然后再返回来测试应用程序，而无需更改任何代码。

希望这能有所帮助。

I had the EXACT same issue as the OP. My configuration and situation were identical. I finally narrowed it down to being an issue in WCFStorm after creating a service reference in a test project in Visual Studio and confirming that the service was working. In Storm you need to click on the "Config" settings option (NOT THE "Client Config"). After clicking on that, click on the "Security" tab on the dialog that pops up. Make sure "Authentication Type" is set to "None" (The default is "Windows Authentication"). Presto, it works! I always test out my methods in WCFStorm as I'm building them out, but have never tried using it to connect to one that has already been set up on SSL. Hope this helps someone!

我需要以下绑定来让我的工作:

        <binding name="SI_PurchaseRequisition_ISBindingSSL">
          <security mode="Transport">
            <transport clientCredentialType="Basic" proxyCredentialType="None" realm="" />
          </security>
        </binding>

您是在Cassini (vs开发服务器)上运行此程序，还是在安装了证书的IIS上运行此程序?我在过去尝试连接开发web服务器上的安全端点时遇到过问题。

下面是过去对我有用的绑定配置。它使用wsHttpBinding而不是basicHttpBinding。我不知道这对你来说是不是问题。

<!-- Binding settings for HTTPS endpoint -->
<binding name="WsSecured">
    <security mode="Transport">
        <transport clientCredentialType="None" />
        <message clientCredentialType="None"
            negotiateServiceCredential="false"
            establishSecurityContext="false" />
    </security>
</binding>

还有端点

<endpoint address="..." binding="wsHttpBinding"
    bindingConfiguration="WsSecured" contract="IYourContract" />

另外，请确保更改客户端配置以启用传输安全性。

遇到同样的问题，这是我最后的解决方案:

        <basicHttpsBinding>
            <binding name="VerificationServicesPasswordBinding">
              <security mode="Transport">
              </security>
            </binding>
            <binding name="VerificationServicesPasswordBinding1" />
        </basicHttpsBinding>

我基本上把所有出现的Http都换成了Https。如果你愿意，你可以试着把它们都加起来。