gdb -ex 'set confirm off' -ex r -ex bt -ex q <my-program>

ulimit -c unlimited

是一个系统变量，它将允许在应用程序崩溃后创建一个核心转储。在这种情况下是无限的。在同一目录中查找一个名为core的文件。确保在编译代码时启用了调试信息!

问候

Linux

虽然已经有人建议使用execinfo.h中的backtrace()函数来打印堆栈跟踪并在出现分段错误时优雅地退出，但我没有看到提到确保所产生的回溯指向错误的实际位置所必需的复杂性(至少对于某些架构- x86和ARM)。

进入信号处理程序时，堆栈帧链中的前两个条目在信号处理程序中包含一个返回地址，在libc中的sigaction()中包含一个返回地址。在信号(即故障位置)之前调用的最后一个函数的堆栈帧丢失。

Code

#ifndef _GNU_SOURCE
#define _GNU_SOURCE
#endif
#ifndef __USE_GNU
#define __USE_GNU
#endif

#include <execinfo.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <ucontext.h>
#include <unistd.h>

/* This structure mirrors the one found in /usr/include/asm/ucontext.h */
typedef struct _sig_ucontext {
 unsigned long     uc_flags;
 ucontext_t        *uc_link;
 stack_t           uc_stack;
 sigcontext_t      uc_mcontext;
 sigset_t          uc_sigmask;
} sig_ucontext_t;

void crit_err_hdlr(int sig_num, siginfo_t * info, void * ucontext)
{
 void *             array[50];
 void *             caller_address;
 char **            messages;
 int                size, i;
 sig_ucontext_t *   uc;

 uc = (sig_ucontext_t *)ucontext;

 /* Get the address at the time the signal was raised */
#if defined(__i386__) // gcc specific
 caller_address = (void *) uc->uc_mcontext.eip; // EIP: x86 specific
#elif defined(__x86_64__) // gcc specific
 caller_address = (void *) uc->uc_mcontext.rip; // RIP: x86_64 specific
#else
#error Unsupported architecture. // TODO: Add support for other arch.
#endif

 fprintf(stderr, "signal %d (%s), address is %p from %p\n", 
  sig_num, strsignal(sig_num), info->si_addr, 
  (void *)caller_address);

 size = backtrace(array, 50);

 /* overwrite sigaction with caller's address */
 array[1] = caller_address;

 messages = backtrace_symbols(array, size);

 /* skip first stack frame (points here) */
 for (i = 1; i < size && messages != NULL; ++i)
 {
  fprintf(stderr, "[bt]: (%d) %s\n", i, messages[i]);
 }

 free(messages);

 exit(EXIT_FAILURE);
}

int crash()
{
 char * p = NULL;
 *p = 0;
 return 0;
}

int foo4()
{
 crash();
 return 0;
}

int foo3()
{
 foo4();
 return 0;
}

int foo2()
{
 foo3();
 return 0;
}

int foo1()
{
 foo2();
 return 0;
}

int main(int argc, char ** argv)
{
 struct sigaction sigact;

 sigact.sa_sigaction = crit_err_hdlr;
 sigact.sa_flags = SA_RESTART | SA_SIGINFO;

 if (sigaction(SIGSEGV, &sigact, (struct sigaction *)NULL) != 0)
 {
  fprintf(stderr, "error setting signal handler for %d (%s)\n",
    SIGSEGV, strsignal(SIGSEGV));

  exit(EXIT_FAILURE);
 }

 foo1();

 exit(EXIT_SUCCESS);
}

输出

signal 11 (Segmentation fault), address is (nil) from 0x8c50
[bt]: (1) ./test(crash+0x24) [0x8c50]
[bt]: (2) ./test(foo4+0x10) [0x8c70]
[bt]: (3) ./test(foo3+0x10) [0x8c8c]
[bt]: (4) ./test(foo2+0x10) [0x8ca8]
[bt]: (5) ./test(foo1+0x10) [0x8cc4]
[bt]: (6) ./test(main+0x74) [0x8d44]
[bt]: (7) /lib/libc.so.6(__libc_start_main+0xa8) [0x40032e44]

在信号处理程序中调用backtrace()函数的所有危险仍然存在，不应忽视，但我发现这里描述的功能对调试崩溃非常有帮助。

需要注意的是，我提供的示例是在x86的Linux上开发/测试的。我也成功地实现了这在ARM上使用uc_mcontext。Arm_pc代替uc_mcontext.eip。

下面是我了解这个实现细节的文章的链接: http://www.linuxjournal.com/article/6391

对于Linux和Mac OS X，如果使用gcc或任何使用glibc的编译器，可以使用execinfo.h中的backtrace()函数打印堆栈跟踪，并在出现分段错误时优雅地退出。文档可以在libc手册中找到。

下面是一个示例程序，它安装了一个SIGSEGV处理程序，并在发生段错误时将堆栈跟踪输出到stderr。这里的baz()函数会导致触发处理程序的段错误:

#include <stdio.h>
#include <execinfo.h>
#include <signal.h>
#include <stdlib.h>
#include <unistd.h>


void handler(int sig) {
  void *array[10];
  size_t size;

  // get void*'s for all entries on the stack
  size = backtrace(array, 10);

  // print out all the frames to stderr
  fprintf(stderr, "Error: signal %d:\n", sig);
  backtrace_symbols_fd(array, size, STDERR_FILENO);
  exit(1);
}

void baz() {
 int *foo = (int*)-1; // make a bad pointer
  printf("%d\n", *foo);       // causes segfault
}

void bar() { baz(); }
void foo() { bar(); }


int main(int argc, char **argv) {
  signal(SIGSEGV, handler);   // install our handler
  foo(); // this will call foo, bar, and baz.  baz segfaults.
}

使用-g -rdynamic编译可以在输出中获得符号信息，glibc可以使用它来创建一个漂亮的stacktrace:

$ gcc -g -rdynamic ./test.c -o test

执行此命令将得到以下输出:

$ ./test
Error: signal 11:
./test(handler+0x19)[0x400911]
/lib64/tls/libc.so.6[0x3a9b92e380]
./test(baz+0x14)[0x400962]
./test(bar+0xe)[0x400983]
./test(foo+0xe)[0x400993]
./test(main+0x28)[0x4009bd]
/lib64/tls/libc.so.6(__libc_start_main+0xdb)[0x3a9b91c4bb]
./test[0x40086a]

这显示了堆栈中每个帧的加载模块、偏移量和函数。在这里，您可以看到信号处理程序位于堆栈顶部，除了main、foo、bar和baz之外，还在main之前有libc函数。

我可以帮助Linux版本:函数backtrace, backtrace_symbols和backtrace_symbols_fd可以使用。请参见相应的手册。

除了上面的答案，这里还介绍了如何让Debian Linux操作系统生成核心转储

Create a “coredumps” folder in the user's home folder Go to /etc/security/limits.conf. Below the ' ' line, type “ soft core unlimited”, and “root soft core unlimited” if enabling core dumps for root, to allow unlimited space for core dumps. NOTE: “* soft core unlimited” does not cover root, which is why root has to be specified in its own line. To check these values, log out, log back in, and type “ulimit -a”. “Core file size” should be set to unlimited. Check the .bashrc files (user, and root if applicable) to make sure that ulimit is not set there. Otherwise, the value above will be overwritten on startup. Open /etc/sysctl.conf. Enter the following at the bottom: “kernel.core_pattern = /home//coredumps/%e_%t.dump”. (%e will be the process name, and %t will be the system time) Exit and type “sysctl -p” to load the new configuration Check /proc/sys/kernel/core_pattern and verify that this matches what you just typed in. Core dumping can be tested by running a process on the command line (“ &”), and then killing it with “kill -11 ”. If core dumping is successful, you will see “(core dumped)” after the segmentation fault indication.