有一个名为pyping的模块可以做到这一点。可以用pip安装

pip install pyping

它使用起来非常简单，但是，当使用这个模块时，您需要root访问权限，因为它在底层制作原始数据包。

import pyping

r = pyping.ping('google.com')

if r.ret_code == 0:
    print("Success")
else:
    print("Failed with {}".format(r.ret_code))

我在类似的情况下找到了这个问题。我尝试了pyping，但Naveen给出的例子在Python 2.7下的Windows中对我不起作用。

一个对我有用的例子是:

import pyping

response = pyping.send('Your IP')

if response['ret_code'] == 0:
    print("reachable")
else:
    print("unreachable")

我使用这篇文章中回答的想法，但只使用更新的推荐子进程模块和python3:

import subprocess
import platform

operating_sys = platform.system()
nas = '192.168.0.10'

def ping(ip):
    # ping_command = ['ping', ip, '-n', '1'] instead of ping_command = ['ping', ip, '-n 1'] for Windows
    ping_command = ['ping', ip, '-n', '1'] if operating_sys == 'Windows' else ['ping', ip, '-c 1']
    shell_needed = True if operating_sys == 'Windows' else False

    ping_output = subprocess.run(ping_command,shell=shell_needed,stdout=subprocess.PIPE)
    success = ping_output.returncode
    return True if success == 0 else False

out = ping(nas)
print(out)

在linux上，可以创建ICMP数据报(不是原始)套接字，而不需要root(或setuid或CAP_NET_RAW): https://unix.stackexchange.com/a/592914。最后我得到了

$ id
uid=1000(raylu) gid=1000(raylu) [...]
$ sudo sysctl net.ipv4.ping_group_range='1000 1000'

import socket
import struct
import time

def main():
    ping('192.168.1.10')

def ping(destination):
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.getprotobyname('icmp'))
    sock.settimeout(10.0)
    start_time = time.time_ns() # python 3.7+ only

    payload = struct.pack('L', start_time)
    sock.sendto(encode(payload), (destination, 0))
    while (time.time_ns() - start_time) // 1_000_000_000 < 10:
        try:
            data, source = sock.recvfrom(256)
        except socket.timeout:
            print('timed out')
            return
        message_type, message_code, check, identifier, sequence_number = struct.unpack('bbHHh', data[:8])
        if source == (destination, 0) and message_type == ICMP.ECHO_REPLY and data[8:] == payload:
            print((time.time_ns() - start_time) // 1_000_000, 'ms')
            break
        else:
            print('got unexpected packet from %s:' % source[0], message_type, data[8:])
    else:
        print('timed out')

def encode(payload: bytes):
    # calculate checksum with check set to 0
    checksum = calc_checksum(icmp_header(ICMP.ECHO_REQUEST, 0, 0, 1, 1) + payload)
    # craft the packet again with the checksum set
    return icmp_header(ICMP.ECHO_REQUEST, 0, checksum, 1, 1) + payload

def icmp_header(message_type, message_code, check, identifier, sequence_number) -> bytes:
    return struct.pack('bbHHh', message_type, message_code, check, identifier, sequence_number)

def calc_checksum(data: bytes) -> int:
    '''RFC 1071'''
    # code stolen from https://github.com/alessandromaggio/pythonping/blob/a59ce65a/pythonping/icmp.py#L8
    '''
    MIT License

    Copyright (c) 2018 Alessandro Maggio

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in all
    copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    SOFTWARE.
    '''
    subtotal = 0
    for i in range(0, len(data)-1, 2):
        subtotal += (data[i] << 8) + data[i+1]
    if len(data) % 2:
        subtotal += (data[len(data)-1] << 8)
    while subtotal >> 16:
        subtotal = (subtotal & 0xFFFF) + (subtotal >> 16)
    check = ~subtotal
    return ((check << 8) & 0xFF00) | ((check >> 8) & 0x00FF)

class ICMP:
    ECHO_REPLY = 0
    ECHO_REQUEST = 8

虽然这里其他答案建议的许多软件包也可以工作

很多答案都忽略了一点(至少在Windows中)，如果ping命令收到“目标主机不可达”的回复，它将返回0(表示成功)。

下面是我的代码，它检查b' ttl ='是否在响应中，因为它只在ping到达主机时才出现。注意:此代码的大部分是基于这里的其他答案。

import platform
import subprocess

def ping(ipAddr, timeout=100):
    '''
    Send a ping packet to the specified host, using the system ping command.
    Accepts ipAddr as string for the ping destination.
    Accepts timeout in ms for the ping timeout.
    Returns True if ping succeeds otherwise Returns False.
        Ping succeeds if it returns 0 and the output includes b'TTL='
    '''
    if platform.system().lower() == 'windows':
        numFlag = '-n'
    else:
        numFlag = '-c'
    completedPing = subprocess.run(['ping', numFlag, '1', '-w', str(timeout), ipAddr],
                                   stdout=subprocess.PIPE,    # Capture standard out
                                   stderr=subprocess.STDOUT)  # Capture standard error
    # print(completedPing.stdout)
    return (completedPing.returncode == 0) and (b'TTL=' in completedPing.stdout)

print(ping('google.com'))

注意:这将捕获输出而不是打印输出，因此如果您希望看到ping的输出，则需要打印completedPing。返回前的Stdout。

使用Multi-ping (pip install multiPing)，我做了这个简单的代码(简单地复制和粘贴，如果你愿意!):

from multiping import MultiPing

def ping(host,n = 0):
    if(n>0):
        avg = 0
        for i in range (n):
            avg += ping(host)
        avg = avg/n
    # Create a MultiPing object to test hosts / addresses
    mp = MultiPing([host])

    # Send the pings to those addresses
    mp.send()

    # With a 1 second timout, wait for responses (may return sooner if all
    # results are received).
    responses, no_responses = mp.receive(1)


    for addr, rtt in responses.items():
        RTT = rtt


    if no_responses:
        # Sending pings once more, but just to those addresses that have not
        # responded, yet.
        mp.send()
        responses, no_responses = mp.receive(1)
        RTT = -1

    return RTT

用法:

#Getting the latency average (in seconds) of host '192.168.0.123' using 10 samples
ping('192.168.0.123',10)

如果你想要一个单一的样本，第二个参数“10”可以忽略!

希望能有所帮助!