我得到这段代码通过PHP隐蔽大小字节。
现在我想使用JavaScript将这些大小转换为人类可读的大小。我尝试将这段代码转换为JavaScript,看起来像这样:
function formatSizeUnits(bytes){
if (bytes >= 1073741824) { bytes = (bytes / 1073741824).toFixed(2) + " GB"; }
else if (bytes >= 1048576) { bytes = (bytes / 1048576).toFixed(2) + " MB"; }
else if (bytes >= 1024) { bytes = (bytes / 1024).toFixed(2) + " KB"; }
else if (bytes > 1) { bytes = bytes + " bytes"; }
else if (bytes == 1) { bytes = bytes + " byte"; }
else { bytes = "0 bytes"; }
return bytes;
}
这是正确的做法吗?有没有更简单的方法?
const byteConversion = (bytes: number, decimals = 2) => {
if (bytes === 0) return '0 B';
const kiloByte = 1000;
const decimal = decimals < 0 ? 0 : decimals;
const sizes = ['B', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'];
const i: number = Math.floor(Math.log(bytes) / Math.log(kiloByte));
return `${parseFloat((bytes / kiloByte ** i).toFixed(decimal))} ${sizes[i]}`;
};
当与字节相关时,有两种真实的方法来表示大小,它们是SI单位(10^3)或IEC单位(2^10)。也有JEDEC,但他们的方法是模糊的和令人困惑的。我注意到其他示例有错误,例如使用KB而不是KB来表示千字节,因此我决定编写一个函数,使用当前接受的度量单位的范围来解决这些情况。
在结尾有一个格式化的地方,这将使数字看起来更好一点(至少在我看来),如果它不适合你的目的,请随意删除这个格式。
享受。
// pBytes: the size in bytes to be converted.
// pUnits: 'si'|'iec' si units means the order of magnitude is 10^3, iec uses 2^10
function prettyNumber(pBytes, pUnits) {
// Handle some special cases
if(pBytes == 0) return '0 Bytes';
if(pBytes == 1) return '1 Byte';
if(pBytes == -1) return '-1 Byte';
var bytes = Math.abs(pBytes)
if(pUnits && pUnits.toLowerCase() && pUnits.toLowerCase() == 'si') {
// SI units use the Metric representation based on 10^3 as a order of magnitude
var orderOfMagnitude = Math.pow(10, 3);
var abbreviations = ['Bytes', 'kB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'];
} else {
// IEC units use 2^10 as an order of magnitude
var orderOfMagnitude = Math.pow(2, 10);
var abbreviations = ['Bytes', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB', 'YiB'];
}
var i = Math.floor(Math.log(bytes) / Math.log(orderOfMagnitude));
var result = (bytes / Math.pow(orderOfMagnitude, i));
// This will get the sign right
if(pBytes < 0) {
result *= -1;
}
// This bit here is purely for show. it drops the percision on numbers greater than 100 before the units.
// it also always shows the full number of bytes if bytes is the unit.
if(result >= 99.995 || i==0) {
return result.toFixed(0) + ' ' + abbreviations[i];
} else {
return result.toFixed(2) + ' ' + abbreviations[i];
}
}
我有一个问题的元数据从服务器返回不同大小的单位。我使用了@Alicejim response,并试图让它更通用。在这里分享代码,也许会帮助到一些人。
enum SizeUnits {
Bytes = 'Bytes',
KB = 'KB',
MB = 'MB',
GB = 'GB',
TB = 'TB',
PB = 'PB',
EB = 'EB',
ZB = 'ZB',
YB = 'YB'
}
function convertSizeUnites(size: number, sourceSizeUnits: SizeUnits, targetSizeUnits: SizeUnits) {
const i = Object.keys(SizeUnits).indexOf(sourceSizeUnits);
const sizeInBytes = size * Math.pow(1024, i);
const j = Object.keys(SizeUnits).indexOf(targetSizeUnits);
return sizeInBytes / Math.pow(1024, j);
}
function formatSize(size: number, measureUnit: SizeUnits, decimals = 2) {
if (size === 0) return '0 Bytes';
const sizeInBytes = convertSizeUnites(size, measureUnit, SizeUnits.Bytes);
const dm = decimals < 0 ? 0 : decimals;
const i = Math.floor(Math.log(sizeInBytes) / Math.log(1024));
return parseFloat((sizeInBytes / Math.pow(1024, i)).toFixed(dm)) + ' ' +
Object.keys(SizeUnits)[i];
}
我只是想分享我的想法。我遇到了这个问题,所以我的解决方案是这样的。这将把低单位转换为高单位,反之亦然,只需提供参数toUnit和fromUnit
export function fileSizeConverter(size: number, fromUnit: string, toUnit: string ): number | string {
const units: string[] = ['B', 'KB', 'MB', 'GB', 'TB'];
const from = units.indexOf(fromUnit.toUpperCase());
const to = units.indexOf(toUnit.toUpperCase());
const BASE_SIZE = 1024;
let result: number | string = 0;
if (from < 0 || to < 0 ) { return result = 'Error: Incorrect units'; }
result = from < to ? size / (BASE_SIZE ** to) : size * (BASE_SIZE ** from);
return result.toFixed(2);
}
我从这里得到了灵感