我在我的iPhone应用中使用UITableView,我有一个属于一个组的人的列表。我希望当用户单击一个特定的人(因此选择单元格)时,单元格的高度会增加,以显示用于编辑这个人的属性的几个UI控件。
这可能吗?
我在我的iPhone应用中使用UITableView,我有一个属于一个组的人的列表。我希望当用户单击一个特定的人(因此选择单元格)时,单元格的高度会增加,以显示用于编辑这个人的属性的几个UI控件。
这可能吗?
当前回答
我喜欢西蒙·李的回答。我实际上并没有尝试这个方法,但它看起来会改变列表中所有单元格的大小。我只是希望改变一下被窃听的细胞。我有点像西蒙,但有一点不同。这将改变选定单元格时的外观。它确实有动画。只是另一种方法。
创建一个int来保存当前选定单元格索引的值:
int currentSelection;
然后:
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
int row = [indexPath row];
selectedNumber = row;
[tableView beginUpdates];
[tableView endUpdates];
}
然后:
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath {
if ([indexPath row] == currentSelection) {
return 80;
}
else return 40;
}
我相信您可以在tableView:cellForRowAtIndexPath:中进行类似的更改,以更改单元格的类型,甚至为单元格加载xib文件。
像这样,currentSelection将从0开始。如果您不希望列表的第一个单元格(在索引0处)默认情况下看起来是选中的,则需要进行调整。
其他回答
这是为了按索引展开行:
@property (nonatomic) NSIndexPath *expandIndexPath;
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath*)indexPath
{
if ([indexPath isEqual:self.expandedIndexPath])
return 100;
return 44;
}
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath
{
NSMutableArray *modifiedRows = [NSMutableArray array];
if ([indexPath isEqual:self.expandIndexPath]) {
[modifiedRows addObject:self.expandIndexPath];
self.expandIndexPath = nil;
} else {
if (self.expandedIndexPath)
[modifiedRows addObject:self.expandIndexPath];
self.expandIndexPath = indexPath;
[modifiedRows addObject:indexPath];
}
// This will animate updating the row sizes
[tableView reloadRowsAtIndexPaths:modifiedRows withRowAnimation:UITableViewRowAnimationAutomatic];
// Preserve the deselection animation (if desired)
[tableView selectRowAtIndexPath:indexPath animated:NO scrollPosition:UITableViewScrollPositionNone];
[tableView deselectRowAtIndexPath:indexPath animated:YES];
}
- (UITableViewCell *)tableView:(UITableView *)tableView cellForRowAtIndexPath:(NSIndexPath *)indexPath
{
UITableViewCell *cell = [tableView dequeueReusableCellWithIdentifier:ViewControllerCellReuseIdentifier];
cell.textLabel.text = [NSString stringWithFormat:@"I'm cell %ld:%ld", (long)indexPath.section, (long)indexPath.row];
return cell;
}
添加一个属性来跟踪选定的单元格
@property (nonatomic) int currentSelection;
将它设置为(例如)viewDidLoad中的哨兵值,以确保UITableView从“正常”位置开始
- (void)viewDidLoad
{
[super viewDidLoad];
// Do any additional setup after loading the view.
//sentinel
self.currentSelection = -1;
}
在highightforrowatindexpath中,您可以为所选单元格设置所需的高度
- (CGFloat)tableView:(UITableView *)tableView heightForRowAtIndexPath:(NSIndexPath *)indexPath{
int rowHeight;
if ([indexPath row] == self.currentSelection) {
rowHeight = self.newCellHeight;
} else rowHeight = 57.0f;
return rowHeight;
}
在didSelectRowAtIndexPath中,如果需要,保存当前选择并保存动态高度
- (void)tableView:(UITableView *)tableView didSelectRowAtIndexPath:(NSIndexPath *)indexPath {
// do things with your cell here
// set selection
self.currentSelection = indexPath.row;
// save height for full text label
self.newCellHeight = cell.titleLbl.frame.size.height + cell.descriptionLbl.frame.size.height + 10;
// animate
[tableView beginUpdates];
[tableView endUpdates];
}
}
在didDeselectRowAtIndexPath中将选择索引设置回哨兵值,并将单元格动画回正常形式
- (void)tableView:(UITableView *)tableView didDeselectRowAtIndexPath:(NSIndexPath *)indexPath {
// do things with your cell here
// sentinel
self.currentSelection = -1;
// animate
[tableView beginUpdates];
[tableView endUpdates];
}
}
reloadData不好,因为没有动画…
这是我目前正在尝试的:
NSArray* paths = [NSArray arrayWithObject:[NSIndexPath indexPathForRow:0 inSection:0]];
[self.tableView beginUpdates];
[self.tableView insertRowsAtIndexPaths:paths withRowAnimation:UITableViewRowAnimationFade];
[self.tableView deleteRowsAtIndexPaths:paths withRowAnimation:UITableViewRowAnimationFade];
[self.tableView endUpdates];
它几乎是正确的。几乎。我正在增加单元格的高度,当单元格被替换时,有时在表格视图中会有一点“小问题”,就像在表格视图中保留了一些滚动位置一样,新单元格(表中的第一个单元格)的偏移量过高,而滚动视图会反弹以重新定位它。
输入- - -
tableView.beginUpdates () tableView.endUpdates () 这些函数不会调用
func tableView(_ tableView: UITableView, cellForRowAt indexPath: indexPath) -> UITableViewCell {}
但是,如果你这样做了, 表视图。reloadRows (:(selectedIndexPath !, .none)
它会调用 func tableView(_ tableView: UITableView, cellForRowAt indexPath: indexPath) -> UITableViewCell {} 这个函数。
获取所选行的indexpath。重新加载表。在UITableViewDelegate的highightforrowatindexpath方法中,将所选行的高度设置为不同的高度,对于其他的则返回正常的行高度