所以，我的问题是SQLite试图在WPF的设计时加载。由于我只关心x86环境，所以我将CPU首选项设置为x86环境，并将Nuget包中的SQLite.Interop.dll复制到解决方案的根目录。重新启动解决方案，所有问题都消失了。因此，如果遇到设计时问题，请将库放到解决方案的根目录中。

此外，我在运行时遇到了类似的问题，所以我必须将SQLite.Interop.dll的副本放入我的项目中，并将其设置为复制，如果它在属性中较新的。似乎x86和x64提供的文件夹是完全无用的。还需要进一步的调查，但总的来说…在你的项目中手动引用SQLite比使用Nuget包更容易。

此外，官方常见问题解答如下:

(20) When the System.Data.SQLite project is compiled and run from inside Visual Studio, why do I get a DllNotFoundException or a BadImageFormatException (for "sqlite3.dll" or "SQLite.Interop.dll") when trying to run or debug the application? When compiling and running a solution from within Visual Studio that uses the System.Data.SQLite project (including the test project), it is very important to select the correct build configuration and platform. First, managed applications to be debugged inside Visual Studio cannot use the mixed-mode assembly (i.e. because it is always compiled to the platform-specific build output directory). This is necessary to properly support building binaries for multiple platforms using the same source project files. Therefore, only the "DebugNativeOnly" or "ReleaseNativeOnly" build configurations should be selected when running a managed application from inside Visual Studio that relies upon the System.Data.SQLite assembly. These build configurations contain a custom post-build step that copies the required native assembly to the managed output directory (i.e. to enable running the managed binaries in-place). However, this post-build step will only be performed if the selected platform matches that of the operating system (e.g. "Win32" for 32-bit Windows and "x64" for 64-bit Windows). Therefore, it is good practice to double-check the selected build platform against the operating system prior to attempting to run a managed project in the solution.

https://system.data.sqlite.org/index.html/doc/trunk/www/faq.wiki#q20

复制SQLite.Interop.dll到项目目录。

src\
  project\
      bin\   <-- Past in bin
         x64\
           SQLite.Interop.dll <-- Copy this if 64
         x86\
           SQLite.Interop.dll <-- Copy this if 32

我自己也遇到过这个问题，但事实证明是另一个原因:

System.DllNotFoundException was caught 
Unable to load DLL 'SQLite.Interop.dll': Access is denied. 

在这种情况下，代码是从IIS托管的web服务(为x86版本配置)中(间接地)调用的。我最终在IIS的应用程序池中找到了它:最初我使用的是“ASP。NET V4.0集成”(这导致了这个错误)，但当我把它改成“DefaultAppPool”时，问题就消失了。

(唷!)

一个对我有效的解决方案是从nuget包中安装System.Data.SQLite。

导入要导入的项目的.dll，并安装System.Data.SQLite。

这将安装与您的解决方案/项目兼容并更新的ddl。

我已经开始使用Costura了。Fody可以打包(.net)程序集，并嵌入和预加载本地dll。这也有助于以后的分发，因为您可以发送一个文件。

Install Costura Fody from Nuget. In your C# project create a folder called costrua32. In there add any native dlls you which C# to load. Once you have added them to this folder. Click on the properties window and change build action to "Embedded Resource" Finally you need to amend the XML file called FodyWeavers.xml as follows. Here I am specifying load the sql dll first. (note you drop the .dll) Weavers Costura PreloadOrder SQLite.Interop tbb_debug tbb /PreloadOrder> /Costura /Weavers

这样做的好处是，您不必编写任何构建前或构建后事件，最终产品完全封装在一个较大的文件中。

大会上会有竞争吗?检查DLL上是否有其他具有文件锁的应用程序。

如果是这个原因，使用Sysinternal的Process Explorer之类的工具来发现有问题的程序应该很容易。

HTH, 粘土