这适用于windows 7: SET PATH=%PATH%

通过输入echo %PATH%测试，它工作正常。也设置如果你打开一个新的cmd，不需要那些讨厌的重新启动:)

我喜欢巧克力之后的方法，就像匿名懦夫的回答，因为这是一个纯粹的批量处理方法。但是，它会留下一个临时文件和一些临时变量。我给自己做了一个更干净的版本。

在路径的某个地方创建一个文件refreshv .bat。通过执行refreshEnv来刷新控制台环境。

@ECHO OFF
REM Source found on https://github.com/DieterDePaepe/windows-scripts
REM Please share any improvements made!

REM Code inspired by http://stackoverflow.com/questions/171588/is-there-a-command-to-refresh-environment-variables-from-the-command-prompt-in-w

IF [%1]==[/?] GOTO :help
IF [%1]==[/help] GOTO :help
IF [%1]==[--help] GOTO :help
IF [%1]==[] GOTO :main

ECHO Unknown command: %1
EXIT /b 1 

:help
ECHO Refresh the environment variables in the console.
ECHO.
ECHO   refreshEnv       Refresh all environment variables.
ECHO   refreshEnv /?        Display this help.
GOTO :EOF

:main
REM Because the environment variables may refer to other variables, we need a 2-step approach.
REM One option is to use delayed variable evaluation, but this forces use of SETLOCAL and
REM may pose problems for files with an '!' in the name.
REM The option used here is to create a temporary batch file that will define all the variables.

REM Check to make sure we don't overwrite an actual file.
IF EXIST %TEMP%\__refreshEnvironment.bat (
  ECHO Environment refresh failed!
  ECHO.
  ECHO This script uses a temporary file "%TEMP%\__refreshEnvironment.bat", which already exists. The script was aborted in order to prevent accidental data loss. Delete this file to enable this script.
  EXIT /b 1
)

REM Read the system environment variables from the registry.
FOR /F "usebackq tokens=1,2,* skip=2" %%I IN (`REG QUERY "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment"`) DO (
  REM /I -> ignore casing, since PATH may also be called Path
  IF /I NOT [%%I]==[PATH] (
    ECHO SET %%I=%%K>>%TEMP%\__refreshEnvironment.bat
  )
)

REM Read the user environment variables from the registry.
FOR /F "usebackq tokens=1,2,* skip=2" %%I IN (`REG QUERY HKCU\Environment`) DO (
  REM /I -> ignore casing, since PATH may also be called Path
  IF /I NOT [%%I]==[PATH] (
    ECHO SET %%I=%%K>>%TEMP%\__refreshEnvironment.bat
  )
)

REM PATH is a special variable: it is automatically merged based on the values in the
REM system and user variables.
REM Read the PATH variable from the system and user environment variables.
FOR /F "usebackq tokens=1,2,* skip=2" %%I IN (`REG QUERY "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v PATH`) DO (
  ECHO SET PATH=%%K>>%TEMP%\__refreshEnvironment.bat
)
FOR /F "usebackq tokens=1,2,* skip=2" %%I IN (`REG QUERY HKCU\Environment /v PATH`) DO (
  ECHO SET PATH=%%PATH%%;%%K>>%TEMP%\__refreshEnvironment.bat
)

REM Load the variable definitions from our temporary file.
CALL %TEMP%\__refreshEnvironment.bat

REM Clean up after ourselves.
DEL /Q %TEMP%\__refreshEnvironment.bat

ECHO Environment successfully refreshed.

环境变量保存在HKEY_LOCAL_MACHINE\SYSTEM\ControlSet\Control\Session Manager\Environment中。

许多有用的环境变量，如Path，都存储为REG_SZ。有几种方法可以访问注册表，包括REGEDIT:

REGEDIT /E <“HKEY_LOCAL_MACHINE \ SYSTEM \ ControlSet001 \会话管理器\ \控制环境”

输出从神奇的数字开始。因此，要用find命令搜索它，它需要输入并重定向:type <filename> | findstr -c:\"Path\"

所以，如果你只是想用系统属性刷新当前命令会话中的路径变量，下面的批处理脚本可以很好地工作:

RefreshPath.cmd:

    @echo off

    REM This solution requests elevation in order to read from the registry.

    if exist %temp%\env.reg del %temp%\env.reg /q /f

    REGEDIT /E %temp%\env.reg "HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Control\Session Manager\Environment"

    if not exist %temp%\env.reg (
       echo "Unable to write registry to temp location"
       exit 1
       )

    SETLOCAL EnableDelayedExpansion

    for /f "tokens=1,2* delims==" %%i in ('type %temp%\env.reg ^| findstr -c:\"Path\"=') do (
       set upath=%%~j
       echo !upath:\\=\! >%temp%\newpath
       )

     ENDLOCAL

     for /f "tokens=*" %%i in (%temp%\newpath) do set path=%%i

我已经用了几年的解决方案:

@echo off
rem Refresh PATH from registry.
setlocal
set USR_PATH=
set SYS_PATH=
for /F "tokens=3* skip=2" %%P in ('%SystemRoot%\system32\reg.exe query "HKLM\SYSTEM\CurrentControlSet\Control\Session Manager\Environment" /v PATH') do @set "SYS_PATH=%%P %%Q"
for /F "tokens=3* skip=2" %%P in ('%SystemRoot%\system32\reg.exe query "HKCU\Environment" /v PATH') do @set "USR_PATH=%%P %%Q"
if "%SYS_PATH:~-1%"==" " set "SYS_PATH=%SYS_PATH:~0,-1%"
if "%USR_PATH:~-1%"==" " set "USR_PATH=%USR_PATH:~0,-1%"
endlocal & call set "PATH=%SYS_PATH%;%USR_PATH%"
goto :EOF

编辑:糟糕，这是更新版。

令人困惑的事情可能是，有几个地方可以启动cmd。 在我的情况下，我从windows资源管理器运行cmd，环境变量没有改变，而当从“运行”(windows键+ r)开始cmd时，环境变量被改变了。

在我的情况下，我只需要从任务管理器中杀死windows资源管理器进程，然后从任务管理器中重新启动它。

一旦我这样做了，我就可以从windows资源管理器衍生的cmd中访问新的环境变量。

调用这个函数对我来说很有用:

VOID Win32ForceSettingsChange()
{
    DWORD dwReturnValue;
    ::SendMessageTimeout(HWND_BROADCAST, WM_SETTINGCHANGE, 0, (LPARAM) "Environment", SMTO_ABORTIFHUNG, 5000, &dwReturnValue);
}