我认为有一种方法可以通过Wi-Fi测试开发中的应用程序。这可能吗?
我希望能够解开我的手机,无线开发。
我认为有一种方法可以通过Wi-Fi测试开发中的应用程序。这可能吗?
我希望能够解开我的手机,无线开发。
当前回答
安装插件Android WiFi ADB
从Android Studio直接下载安装Android WiFi ADB:
文件>设置->插件->浏览存储库-> Android WiFi ADB ->安装->第一次连接线缆->单击“连接”->现在拆除线缆并开始进行调试/运行。
请参考以下资料:
其他回答
我在这里找到了答案:
Connect Android device and adb host computer to a common Wi-Fi network accessible to both. We have found that not all access points are suitable; you may need to use an access point whose firewall is configured properly to support adb. Connect the device with USB cable to host. Make sure adb is running in USB mode on host. $ adb usb restarting in USB mode Connect to the device over USB. $ adb devices List of devices attached ######## device Restart host adb in tcpip mode. $ adb tcpip 5555 restarting in TCP mode port: 5555 Find out the IP address of the Android device: Settings -> About tablet -> Status -> IP address. Remember the IP address, of the form #.#.#.#. sometimes its not possible to find the IP-address of the android device, as in my case. so u can get it using adb as the following: $ adb shell netcfg and the should be in the last line of the result. Connect adb host to device: $ adb connect #.#.#.# connected to #.#.#.#:5555 Remove USB cable from device, and confirm you can still access device: $ adb devices List of devices attached #.#.#.#:5555 device
现在可以开始了!
如果adb连接丢失:
确保你的主机仍然连接到你的Android设备所在的Wi-Fi网络。 再次执行“adb connect”步骤重新连接。 或者如果这不起作用,重置你的adb主机: 亚行kill-server
然后从头再来。
以下是标准的步骤(大部分与之前的答案相同):-
Adb tcpip 5555。 Adb connect your_device_ip_address。 Adb设备(查看设备是否已连接)。
但在某些情况下,上述步骤会出现“无法连接到设备”之类的错误。确保你的电脑和设备连接到同一个WiFi网络。”你注意到这些设备已经在同一个网络上了。
在这种情况下,安装这个插件“Wifi ADB Ultimate”,并遵循以下步骤。
通过USB连接设备一次。 刷新列表,检查其是否连通。 进入“关于话机>状态> IP地址”,填写您的IP地址(例如>)。198.162.0.105)。 回到Android Studio,按下图所示填写这个IP,然后点击运行按钮。
现在,您可以开始了!
在游戏商店下载应用程序Wifi ADB。非常容易使用,工作就像一个魅力!:)
如果你使用Android 11多次点击构建版本激活开发人员选项,然后进入设置>高级>开发人员选项。滚动到调试并打开“无线调试”复选框。点击“无线调试”打开调试菜单。选择“配对设备与配对码”,您将看到与配对码配对的地址。在你的桌面终端上写这个命令来与你的Android设备配对。
adb pair 192.168.XXX.XXX:XXXX <--------- the address showing on screen under paring code
使用配对代码进行连接。 但是等等,我们还没有连接到adb。 在您成功配对您的设备一次之后。您可以在打开无线调试选项的任何时候连接adb。从现在开始,在每次使用adb之前连接它,您不再需要配对地址,而是使用当您进入无线调试菜单时显示的给定地址。
adb connect 192.168.XXX.XXX:XXXX <--- this address shows inside wireless debug menu
我通读了每一个答案,发现没有使用android和根的方法。(使用android 11)
1)。使用termux,我安装了android-tools包,这很容易遵循termux的wiki。
2)打开设置->无线调试:并切换无线调试
3.)单击“配对设备与配对码”。
4)。使用设置应用程序和termux启用分屏。在termux中(设置应用程序仍然打开)输入命令adb pair ip:port(这里的端口就是你在上面的分屏中看到的端口)
5.)它会问你一个代码,再次使用你看到的分屏设置应用程序。
6.)在termux中输入命令adb connect ip:port(确保端口是你上面看到的端口,因为它可能与你刚刚输入的端口不同)
整个过程可以自动使用任务器,我不会张贴在这里,因为我发现它快速和容易手动完成,但任务器的创造者有一个指南在这里的某个地方。