可可荚-减少等待时间到10%(在Mac OS上)

1-在你的项目文件夹中输入pod设置(首先你必须在项目文件夹中)从Mac OS的终端。

2- CTRL+z停止后，它创建主目录(文件夹)[你可以看到它在你的可可豆文件夹位置:~/.cocoapods/repos]

下载。zip https://github.com/CocoaPods/Specs 主分支(它的301 MB)，提取它。大约需要5-10分钟

4.将内容复制到~/。Cocoapods /repos(现在你只需要复制主文件夹中的内容，所以要确保主文件夹已经用pod setup命令创建了)

5-一旦你复制它(或者我应该说移动，拖放复制将永远，因为它非常大)，然后你可以做pod安装-no-repo-update 6-你的pod在pod文件现在将开始安装 这是一个截图

从cocoapods 1.7.2开始，你可以使用cdn而不是github。它燃烧得很快，挂不起来。从cocopods 1.8.0开始，cdn是默认的。

To use the CDN source in your Podfile: If you don't have private specs: source 'https://cdn.cocoapods.org/' If you have private specs: source 'https://github.com/artsy/Specs.git' - source 'https://github.com/CocoaPods/Specs.git' + source 'https://cdn.cocoapods.org/' Doing this will break your Podfile.lock, so you are likely to need to run pod update to see the changes (be careful, this may update your Pods also). If you have a CI setup, it is recommended to cache the new repo dir as it is very small and would save even more time. With 1.7.2 it should be located at ~/.cocoapods/repos/cocoapods- (yes, with a -), but we're looking to improve the naming in an upcoming release.

更多信息:

CocoaPods 1.7.2 -主Repo CDN完成! CocoaPods 1.8测试版来了!

上面的解决方案都不适合我，我不得不卸载coacoapods，然后安装一个特定的版本，然后一切才适合我

sudo gem uninstall cocoapods

然后

sudo gem install cocoapods -v 1.7.5

现在，即使是冗长也显示了进步

$ pod setup --verbose

Setting up CocoaPods master repo

Cloning spec repo `master` from `https://github.com/CocoaPods/Specs.git` (branch `master`)
  $ /usr/bin/git clone https://github.com/CocoaPods/Specs.git --progress -- master
  Cloning into 'master'...
  remote: Enumerating objects: 295, done.        
  remote: Counting objects: 100% (295/295), done.        
  remote: Compressing objects: 100% (283/283), done.        
  Receiving objects:  20% (744493/3722462), 132.93 MiB | 567.00 KiB/s   

你可以试着在verbose模式下运行:

pod install --verbose

这将告诉你可可豆荚的作用:

Setting up CocoaPods master repo

Cloning spec repo `master` from `https://github.com/CocoaPods/Specs.git` (branch `master`)
  $ /usr/bin/git clone 'https://github.com/CocoaPods/Specs.git' master
  Cloning into 'master'...

(如此处所示)

对我来说，上面的步骤花了很长时间，因为回购(2016年12月)现在是1.1 GB

刚刚安装了主回购，很兴奋地看到我们有一个下载进度，见截图;)

CocoaPods 1.2.0版(1月28日)修复了这个问题，感谢所有贡献者和Danielle Tomlinson。

我目前使用的是另一种解决方案。通过更改Podfile中的存储库URL为:

source 'https://cdn.cocoapods.org/'

变化:

- source 'https://github.com/CocoaPods/Specs.git'
+ source 'https://cdn.cocoapods.org/'