我需要一个不会被时间阻塞的可嵌套定时中断(SIGALARM不能做到)。Sleep(基于线程的方法不能做到)。我最终复制了这里的代码并对其进行了轻微修改:http://code.activestate.com/recipes/577600-queue-for-managing-multiple-sigalrm-alarms-concurr/

代码本身:

#!/usr/bin/python

# lightly modified version of http://code.activestate.com/recipes/577600-queue-for-managing-multiple-sigalrm-alarms-concurr/


"""alarm.py: Permits multiple SIGALRM events to be queued.

Uses a `heapq` to store the objects to be called when an alarm signal is
raised, so that the next alarm is always at the top of the heap.
"""

import heapq
import signal
from time import time

__version__ = '$Revision: 2539 $'.split()[1]

alarmlist = []

__new_alarm = lambda t, f, a, k: (t + time(), f, a, k)
__next_alarm = lambda: int(round(alarmlist[0][0] - time())) if alarmlist else None
__set_alarm = lambda: signal.alarm(max(__next_alarm(), 1))


class TimeoutError(Exception):
    def __init__(self, message, id_=None):
        self.message = message
        self.id_ = id_


class Timeout:
    ''' id_ allows for nested timeouts. '''
    def __init__(self, id_=None, seconds=1, error_message='Timeout'):
        self.seconds = seconds
        self.error_message = error_message
        self.id_ = id_
    def handle_timeout(self):
        raise TimeoutError(self.error_message, self.id_)
    def __enter__(self):
        self.this_alarm = alarm(self.seconds, self.handle_timeout)
    def __exit__(self, type, value, traceback):
        try:
            cancel(self.this_alarm) 
        except ValueError:
            pass


def __clear_alarm():
    """Clear an existing alarm.

    If the alarm signal was set to a callable other than our own, queue the
    previous alarm settings.
    """
    oldsec = signal.alarm(0)
    oldfunc = signal.signal(signal.SIGALRM, __alarm_handler)
    if oldsec > 0 and oldfunc != __alarm_handler:
        heapq.heappush(alarmlist, (__new_alarm(oldsec, oldfunc, [], {})))


def __alarm_handler(*zargs):
    """Handle an alarm by calling any due heap entries and resetting the alarm.

    Note that multiple heap entries might get called, especially if calling an
    entry takes a lot of time.
    """
    try:
        nextt = __next_alarm()
        while nextt is not None and nextt <= 0:
            (tm, func, args, keys) = heapq.heappop(alarmlist)
            func(*args, **keys)
            nextt = __next_alarm()
    finally:
        if alarmlist: __set_alarm()


def alarm(sec, func, *args, **keys):
    """Set an alarm.

    When the alarm is raised in `sec` seconds, the handler will call `func`,
    passing `args` and `keys`. Return the heap entry (which is just a big
    tuple), so that it can be cancelled by calling `cancel()`.
    """
    __clear_alarm()
    try:
        newalarm = __new_alarm(sec, func, args, keys)
        heapq.heappush(alarmlist, newalarm)
        return newalarm
    finally:
        __set_alarm()


def cancel(alarm):
    """Cancel an alarm by passing the heap entry returned by `alarm()`.

    It is an error to try to cancel an alarm which has already occurred.
    """
    __clear_alarm()
    try:
        alarmlist.remove(alarm)
        heapq.heapify(alarmlist)
    finally:
        if alarmlist: __set_alarm()

还有一个用法示例:

import alarm
from time import sleep

try:
    with alarm.Timeout(id_='a', seconds=5):
        try:
            with alarm.Timeout(id_='b', seconds=2):
                sleep(3)
        except alarm.TimeoutError as e:
            print 'raised', e.id_
        sleep(30)
except alarm.TimeoutError as e:
    print 'raised', e.id_
else:
    print 'nope.'

在@piro答案的基础上，您可以构建一个contextmanager。这允许非常易读的代码，将在成功运行后禁用警报信号(sets signal.alarm(0))

from contextlib import contextmanager
import signal
import time

@contextmanager
def timeout(duration):
    def timeout_handler(signum, frame):
        raise TimeoutError(f'block timedout after {duration} seconds')
    signal.signal(signal.SIGALRM, timeout_handler)
    signal.alarm(duration)
    try:
        yield
    finally:
        signal.alarm(0)

def sleeper(duration):
    time.sleep(duration)
    print('finished')

使用示例:

In [19]: with timeout(2):
    ...:     sleeper(1)
    ...:     
finished

In [20]: with timeout(2):
    ...:     sleeper(3)
    ...:         
---------------------------------------------------------------------------
Exception                                 Traceback (most recent call last)
<ipython-input-20-66c78858116f> in <module>()
      1 with timeout(2):
----> 2     sleeper(3)
      3 

<ipython-input-7-a75b966bf7ac> in sleeper(t)
      1 def sleeper(t):
----> 2     time.sleep(t)
      3     print('finished')
      4 

<ipython-input-18-533b9e684466> in timeout_handler(signum, frame)
      2 def timeout(duration):
      3     def timeout_handler(signum, frame):
----> 4         raise Exception(f'block timedout after {duration} seconds')
      5     signal.signal(signal.SIGALRM, timeout_handler)
      6     signal.alarm(duration)

Exception: block timedout after 2 seconds

我在搜索单元测试的超时调用时遇到了这个线程。我没有在答案或第三方包中找到任何简单的东西，所以我写了下面的装饰器，你可以直接放入代码中:

import multiprocessing.pool
import functools

def timeout(max_timeout):
    """Timeout decorator, parameter in seconds."""
    def timeout_decorator(item):
        """Wrap the original function."""
        @functools.wraps(item)
        def func_wrapper(*args, **kwargs):
            """Closure for function."""
            pool = multiprocessing.pool.ThreadPool(processes=1)
            async_result = pool.apply_async(item, args, kwargs)
            # raises a TimeoutError if execution exceeds max_timeout
            return async_result.get(max_timeout)
        return func_wrapper
    return timeout_decorator

然后就像这样简单地超时测试或任何你喜欢的函数:

@timeout(5.0)  # if execution takes longer than 5 seconds, raise a TimeoutError
def test_base_regression(self):
    ...

asyncio的另一个解决方案:

如果你想取消后台任务，而不仅仅是在运行的主代码上超时，那么你需要一个来自主线程的显式通信，要求任务的代码取消，比如threading.Event()

import asyncio
import functools
import multiprocessing
from concurrent.futures.thread import ThreadPoolExecutor


class SingletonTimeOut:
    pool = None

    @classmethod
    def run(cls, to_run: functools.partial, timeout: float):
        pool = cls.get_pool()
        loop = cls.get_loop()
        try:
            task = loop.run_in_executor(pool, to_run)
            return loop.run_until_complete(asyncio.wait_for(task, timeout=timeout))
        except asyncio.TimeoutError as e:
            error_type = type(e).__name__ #TODO
            raise e

    @classmethod
    def get_pool(cls):
        if cls.pool is None:
            cls.pool = ThreadPoolExecutor(multiprocessing.cpu_count())
        return cls.pool

    @classmethod
    def get_loop(cls):
        try:
            return asyncio.get_event_loop()
        except RuntimeError:
            asyncio.set_event_loop(asyncio.new_event_loop())
            # print("NEW LOOP" + str(threading.current_thread().ident))
            return asyncio.get_event_loop()

# ---------------

TIME_OUT = float('0.2')  # seconds

def toto(input_items,nb_predictions):
    return 1

to_run = functools.partial(toto,
                           input_items=1,
                           nb_predictions="a")

results = SingletonTimeOut.run(to_run, TIME_OUT)

如果您在UNIX上运行，则可以使用信号包:

In [1]: import signal

# Register an handler for the timeout
In [2]: def handler(signum, frame):
   ...:     print("Forever is over!")
   ...:     raise Exception("end of time")
   ...: 

# This function *may* run for an indetermined time...
In [3]: def loop_forever():
   ...:     import time
   ...:     while 1:
   ...:         print("sec")
   ...:         time.sleep(1)
   ...:         
   ...:         

# Register the signal function handler
In [4]: signal.signal(signal.SIGALRM, handler)
Out[4]: 0

# Define a timeout for your function
In [5]: signal.alarm(10)
Out[5]: 0

In [6]: try:
   ...:     loop_forever()
   ...: except Exception, exc: 
   ...:     print(exc)
   ....: 
sec
sec
sec
sec
sec
sec
sec
sec
Forever is over!
end of time

# Cancel the timer if the function returned before timeout
# (ok, mine won't but yours maybe will :)
In [7]: signal.alarm(0)
Out[7]: 0

在调用signal.alarm(10)后10秒，调用处理程序。这会引发一个异常，您可以从常规Python代码中拦截该异常。

这个模块不能很好地使用线程(但是，谁能呢?)

注意，由于我们在超时发生时引发异常，它可能最终在函数内部被捕获并忽略，例如这样一个函数:

def loop_forever():
    while 1:
        print('sec')
        try:
            time.sleep(10)
        except:
            continue

#!/usr/bin/python2
import sys, subprocess, threading
proc = subprocess.Popen(sys.argv[2:])
timer = threading.Timer(float(sys.argv[1]), proc.terminate)
timer.start()
proc.wait()
timer.cancel()
exit(proc.returncode)