我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

我的解决方案是更新VirtualBox。

在我的Windows 8.1上重新安装Docker工具箱(v1.12.5)后,我第一次遇到这个问题。对我来说有用的是VirtualBox的更新。然后我在一些Windows更新后也遇到了同样的问题,更新VirtualBox再次解决了这个问题。

其他回答

我尝试了上面的方法,但是没有用。最后,我卸载了docker-toolbox (1.11.x)和virtualbox(5.16.x),并在docker-toolbox安装程序GUI中检查了以下选项(默认情况下NDIS5选项未选中)

此外,网络连接中的虚拟适配器有“桥接网络驱动程序”选项未选中,这对我来说很好

在尝试再次创建VirtualBox主机专用适配器之前,您可以尝试在除实际物理网络适配器之外的所有网络适配器上禁用“VirtualBox NDIS6桥接网络驱动程序”。

请看这个答案。

我找到了解决办法

打开Windows网络连接 右键单击已创建的VirtualBox主机专用适配器 选择属性 检查“VirtualBox NDIS6桥接网络驱动程序” 禁用和启用适配器

重启电脑


遗憾的是,在Windows 10 x64和VirtualBox 5.2.6中,https://stackoverflow.com/a/33733454/2191572不能为我工作

这个框已经被选中,一个简单的重新启动就解决了它。

在告诉人们重新开始尝试多年之后,我没能遵循自己的黄金建议;面相,相约掌心。

Open Control Panel >> Network and Sharing Center. Now click on Change Adapter Settings. Right click on the adapter whose Name or the Device Name matches with VirtualBox Host-Only Ethernet Adapter # 3 and click on Properties. Click on the Configure button. Now click on the Driver tab. Click on Update Driver. Select Browse my computer for drivers. Now choose Let me pick from a list of available drivers on my computer. Select the choice you get and click on Next. Click Close to finish the update. Now go back to your Terminal/Powershell/Command window and repeat the vagrant up command. It should work fine this time.

https://www.howtoforge.com/setup-a-local-wordpress-development-environment-with-vagrant/