我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

我已经工作了一段时间,所有你需要做的是打开VirtualBox,

文件>首选项/网络>主机专用网络

您将看到VirtualBox主机专用以太网适配器

点击它,然后编辑。

我对流浪虚拟机的IP设置为192.168.10.10,您应该修改到您的虚拟机IP

这是我的网络设置;

其他回答

如果接受的https://stackoverflow.com/a/33733454/8520387不适合你,那么禁用其他启用的以太网卡。 在此之后,尝试再次运行您的流浪脚本,它将为您创建一个新的网卡。对我来说是第三

在尝试再次创建VirtualBox主机专用适配器之前,您可以尝试在除实际物理网络适配器之外的所有网络适配器上禁用“VirtualBox NDIS6桥接网络驱动程序”。

请看这个答案。

Open Control Panel >> Network and Sharing Center. Now click on Change Adapter Settings. Right click on the adapter whose Name or the Device Name matches with VirtualBox Host-Only Ethernet Adapter # 3 and click on Properties. Click on the Configure button. Now click on the Driver tab. Click on Update Driver. Select Browse my computer for drivers. Now choose Let me pick from a list of available drivers on my computer. Select the choice you get and click on Next. Click Close to finish the update. Now go back to your Terminal/Powershell/Command window and repeat the vagrant up command. It should work fine this time.

https://www.howtoforge.com/setup-a-local-wordpress-development-environment-with-vagrant/

我刚刚在Windows 8上使用VirtualBox 5.1时遇到了这个问题。原来问题出在我安装的卡巴斯基病毒防护软件上。它在windows侧的主机专用适配器上添加了“卡巴斯基反病毒NDIS 6过滤器”。当我禁用该过滤器时,虚拟机正常启动:

重启电脑


遗憾的是,在Windows 10 x64和VirtualBox 5.2.6中,https://stackoverflow.com/a/33733454/2191572不能为我工作

这个框已经被选中,一个简单的重新启动就解决了它。

在告诉人们重新开始尝试多年之后,我没能遵循自己的黄金建议;面相,相约掌心。