我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

这两个答案并没有解决我的问题,但把它们结合起来,我就能解决问题。 我的情况是,我试图在Windows 7 pc上安装和运行Docker,并不断得到一个错误: “看起来好像出了什么问题……按任意键继续…”

经过深入研究,我发现这个问题与Docker创建的主机网络适配器有关。 我安装了NDIS6驱动程序,但它是启用的。我试着取消检查,禁用,重新检查,启用等,但它没有帮助。

然后我卸载VB并按照第一个答案重新安装以获得NDIS5驱动程序。 这是未经检查的,所以检查它,我能够过去这个问题。

其他回答

在Windows 10更新后,我的VirtualBox主机专用以太网适配器实际上从操作系统的网络适配器中消失了(在控制面板->网络和共享中心->更改适配器设置下查看这些)。必须重新安装VirtualBox才能将其带回操作系统。

然后在VirtualBox的新版本中,仅主机适配器位于全局工具(右上)->主机网络管理器之下。确保已为适配器启用DHCP服务器。

示例配置:

打开网络和共享中心,转到侧栏中的更改适配器设置。 在适配器列表中右键单击主机专用适配器,然后配置按钮->驱动程序选项卡->更新驱动程序按钮。 选择浏览我的电脑…在下一个对话框中选择Let me pick ....您应该看到其中只有主机驱动程序的列表。 选择它并单击下一步。驱动更新后,请重新尝试在虚拟机中使用主机网络。

对我来说,将VirtualBox更新到5.1.23解决了这个问题。Windows版本可从官方网站下载。

在我的情况下,我只做:

1-像下图一样更新Hyper-V配置。

2-重启机器。

3 .运行virtualbox

4-跑流浪汉起来

我尝试了上面的方法,但是没有用。最后,我卸载了docker-toolbox (1.11.x)和virtualbox(5.16.x),并在docker-toolbox安装程序GUI中检查了以下选项(默认情况下NDIS5选项未选中)

此外,网络连接中的虚拟适配器有“桥接网络驱动程序”选项未选中,这对我来说很好