在Windows10上打开/创建内部网络Vagrant失败

我昨天把我的Windows 10升级到最后一次更新，现在，当我启动vagrant up命令时，我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包，重新配置主机以太网适配器，但总是相同的错误…

什么好主意吗?

当前回答

如果接受的https://stackoverflow.com/a/33733454/8520387不适合你，那么禁用其他启用的以太网卡。在此之后，尝试再次运行您的流浪脚本，它将为您创建一个新的网卡。对我来说是第三

2020-07-12 10:03:20

其他回答

卸载Virtualbox并安装最新版本，在回答这个问题时，它是5.12。我安装了Vagrant，它会自动安装Virtualbox 5.10。我在安装Windows 1511更新后遇到了这个问题，卸载Vagrant提供的Virtualbox并安装最新版本解决了这个问题。

2015-12-31 04:28:37

我刚刚在Windows 8上使用VirtualBox 5.1时遇到了这个问题。原来问题出在我安装的卡巴斯基病毒防护软件上。它在windows侧的主机专用适配器上添加了“卡巴斯基反病毒NDIS 6过滤器”。当我禁用该过滤器时，虚拟机正常启动:

2016-10-23 19:01:23

更新Windows时出现了同样的错误。尝试一切。毫无效果。

最后，进入设备管理器->网络适配器禁用并启用Virtualbox主机专用适配器