我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

Windows 10操作系统 在花了3个小时卸载和重新安装minikube, virtualbox后,没有解决问题,我看到我的网络适配器 控制面板->网络和Internet->网络连接窗口。 有3个启用的“VirtualBox主机专用以太网适配器”。 我把它们都禁用了。 然后在服务屏幕上(运行->services.msc)找到Tcp/Ip NetBIOS帮助程序 然后重新启动。

将创建一个具有正确名称的新网络适配器,如“VirtualBox Host-Only network #3”。 现在类型: minikube删除 mnikube开始 这对我很管用。 希望它能帮助到某人! 我讨厌这个:)

其他回答

打开网络和共享中心,转到侧栏中的更改适配器设置。 在适配器列表中右键单击主机专用适配器,然后配置按钮->驱动程序选项卡->更新驱动程序按钮。 选择浏览我的电脑…在下一个对话框中选择Let me pick ....您应该看到其中只有主机驱动程序的列表。 选择它并单击下一步。驱动更新后,请重新尝试在虚拟机中使用主机网络。

在Windows 10更新后,我的VirtualBox主机专用以太网适配器实际上从操作系统的网络适配器中消失了(在控制面板->网络和共享中心->更改适配器设置下查看这些)。必须重新安装VirtualBox才能将其带回操作系统。

然后在VirtualBox的新版本中,仅主机适配器位于全局工具(右上)->主机网络管理器之下。确保已为适配器启用DHCP服务器。

示例配置:

更新Windows时出现了同样的错误。 尝试一切。毫无效果。

最后,进入设备管理器->网络适配器 禁用并启用Virtualbox主机专用适配器

它成功了!

我已经工作了一段时间,所有你需要做的是打开VirtualBox,

文件>首选项/网络>主机专用网络

您将看到VirtualBox主机专用以太网适配器

点击它,然后编辑。

我对流浪虚拟机的IP设置为192.168.10.10,您应该修改到您的虚拟机IP

这是我的网络设置;

对我来说,将VirtualBox更新到5.1.23解决了这个问题。Windows版本可从官方网站下载。