我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

新的NDIS6驱动程序有一个已知的问题,你可以安装它来使用NDIS5驱动程序

尝试使用参数重新安装(以管理员身份运行)

> virtualbox -5.0.11-104101- win exe -msiparams NETWORKTYPE=NDIS5

这对我很管用。

更新:新版本更容易从安装向导中选择NDIS驱动程序——当被要求时选择NDIS5。

裁判:https://www.virtualbox.org/manual/ch02.html # install-win-performing

其他回答

我找到了解决办法

打开Windows网络连接 右键单击已创建的VirtualBox主机专用适配器 选择属性 检查“VirtualBox NDIS6桥接网络驱动程序” 禁用和启用适配器

在我的情况下,我只做:

1-像下图一样更新Hyper-V配置。

2-重启机器。

3 .运行virtualbox

4-跑流浪汉起来

我有Windows 8.1, VirtualBox 5.0.16.105871有这个问题。我尝试了我在这里找到的所有建议,虚拟盒子网站和其他论坛。没有一个对我有效。当我试图启动一个只使用主机接口的虚拟机时,出现了这个错误:

Failed to open a session for the virtual machine LinuxVMDev0.

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).

Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

Result Code: E_FAIL (0x80004005)
Component: ConsoleWrap
Interface: IConsole {872da645-4a9b-1727-bee2-5585105b9eed}

最后,唯一适合我的解决方案是:

卸载5.0.16 安装版本4.3.36没有这个问题(至少在我的PC上) 在不卸载4.3.36的情况下,按照默认方式安装5.0.16版本

(始终以管理员身份安装,即以管理员身份运行安装程序)。

在尝试了几天不同的解决方案后,这对我来说很有效。

更新Windows时出现了同样的错误。 尝试一切。毫无效果。

最后,进入设备管理器->网络适配器 禁用并启用Virtualbox主机专用适配器

它成功了!

在Windows 10更新后,我的VirtualBox主机专用以太网适配器实际上从操作系统的网络适配器中消失了(在控制面板->网络和共享中心->更改适配器设置下查看这些)。必须重新安装VirtualBox才能将其带回操作系统。

然后在VirtualBox的新版本中,仅主机适配器位于全局工具(右上)->主机网络管理器之下。确保已为适配器启用DHCP服务器。

示例配置: