如何找到本地IP地址(即192.168.x。x或10.0.x.x)在Python平台独立,只使用标准库?


当前回答

我在我的ubuntu机器上使用这个:

import commands
commands.getoutput("/sbin/ifconfig").split("\n")[1].split()[1][5:]

这行不通。

其他回答

我使用以下模块:

#!/usr/bin/python
# module for getting the lan ip address of the computer

import os
import socket

if os.name != "nt":
    import fcntl
    import struct
    def get_interface_ip(ifname):
        s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
        return socket.inet_ntoa(fcntl.ioctl(
                s.fileno(),
                0x8915,  # SIOCGIFADDR
                struct.pack('256s', bytes(ifname[:15], 'utf-8'))
                # Python 2.7: remove the second argument for the bytes call
            )[20:24])

def get_lan_ip():
    ip = socket.gethostbyname(socket.gethostname())
    if ip.startswith("127.") and os.name != "nt":
        interfaces = ["eth0","eth1","eth2","wlan0","wlan1","wifi0","ath0","ath1","ppp0"]
        for ifname in interfaces:
            try:
                ip = get_interface_ip(ifname)
                break;
            except IOError:
                pass
    return ip

测试与windows和linux(和不需要额外的模块为那些) 用于在一个基于IPv4的局域网中的系统。

固定的接口名称列表不适用于最近的linux版本,这些版本已经采用了systemd v197关于可预测接口名称的更改,正如Alexander指出的那样。 在这种情况下,您需要手动使用系统上的接口名称替换该列表,或者使用其他解决方案,如netifaces。

这与之前发布的答案非常相似,但我找不到任何与这种调用用法有关的答案。这是我用于ipv4的。对于ipv6,更改'。' in to ':' in

import socket
print next(i[4][0] for i in socket.getaddrinfo(
    socket.gethostname(), 80) if '127.' not in i[4][0] and '.' in i[4][0]);"

另一个变体的前面的答案,可以保存到一个名为my-ip-to的可执行脚本:

#!/usr/bin/env python

import sys, socket

if len(sys.argv) > 1:
    for remote_host in sys.argv[1:]:
        # determine local host ip by outgoing test to another host
        # use port 9 (discard protocol - RFC 863) over UDP4
        with socket.socket(socket.AF_INET, socket.SOCK_DGRAM) as s:
            s.connect((remote_host, 9))
            my_ip = s.getsockname()[0]
            print(my_ip, flush=True)
else:
    import platform

    my_name = platform.node()
    my_ip = socket.gethostbyname(my_name)
    print(my_ip)

它需要任意数量的远程主机,并打印出本地ip,逐个到达它们:

$ my-ip-to z.cn g.cn localhost
192.168.11.102
192.168.11.102
127.0.0.1
$

并在没有给出arg时打印best-bet。

$ my-ip-to
192.168.11.102

作为别名myip:

alias myip="python -c 'import socket; print([l for l in ([ip for ip in socket.gethostbyname_ex(socket.gethostname())[2] if not ip.startswith(\"127.\")][:1], [[(s.connect((\"8.8.8.8\", 53)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]]) if l][0][0])'"

适用于Python 2。3. Python。x,现代和旧的Linux发行版,OSX/macOS和Windows来查找当前的IPv4地址。 对于有多个IP地址、IPv6、没有配置IP地址或没有互联网访问的机器,将不会返回正确的结果。 据报道,这在最新版本的macOS上不起作用。

注意:如果你打算在Python程序中使用类似的东西,正确的方法是使用支持IPv6的Python模块。


与上面相同,但只是Python代码:

import socket
print([l for l in ([ip for ip in socket.gethostbyname_ex(socket.gethostname())[2] if not ip.startswith("127.")][:1], [[(s.connect(('8.8.8.8', 53)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]]) if l][0][0])

如果没有配置IP地址,将抛出异常。


也可以在没有互联网连接的局域网上工作的版本:

import socket
print((([ip for ip in socket.gethostbyname_ex(socket.gethostname())[2] if not ip.startswith("127.")] or [[(s.connect(("8.8.8.8", 53)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1]]) + ["no IP found"])[0])

(谢谢@ccpizza)


背景:

使用socket.gethostbyname(socket.gethostname())在这里不起作用,因为我所在的一台计算机有一个/etc/hosts,其中有重复的条目和对自身的引用。Socket.gethostbyname()只返回/etc/hosts.中的最后一项

这是我最初的尝试,它清除了所有以“127”开头的地址。”:

import socket
print([ip for ip in socket.gethostbyname_ex(socket.gethostname())[2] if not ip.startswith("127.")][:1])

这适用于Python 2和3,在Linux和Windows上,但不能处理多个网络设备或IPv6。然而,它在最近的Linux发行版上停止工作,所以我尝试了这种替代技术。它尝试在53端口8.8.8.8连接谷歌DNS服务器:

import socket
print([(s.connect(('8.8.8.8', 53)), s.getsockname()[0], s.close()) for s in [socket.socket(socket.AF_INET, socket.SOCK_DGRAM)]][0][1])

然后,我将上述两种技术组合成一个应该在任何地方都适用的一行程序,并在这个答案的顶部创建了myip别名和Python代码片段。

随着IPv6的日益普及,对于具有多个网络接口的服务器,使用第三方Python模块查找IP地址可能比这里列出的任何方法都更健壮和可靠。

在拥有iproute2实用程序的现代*NIX系统上,您可以通过subprocess.run()调用它,因为您可以使用-j开关在JSON中输出,然后使用JSON .loads()模块和方法将其转换为python数据结构。下面的代码显示第一个非环回IP地址。

import subprocess
import json

ip = json.loads(subprocess.run('ip -j a'.split(),capture_output=True).stdout.decode())[1]['addr_info'][0]['local'] 

print(ip)

或者,如果你有多个IP,并且想要找到连接到特定目的地的IP,你可以使用IP -j route get 8.8.8.8,如下所示:

import subprocess 
import json 

ip = json.loads(subprocess.run('ip -j route get 8.8.8.8'.split(),capture_output=True).stdout.decode())[0]['prefsrc']

print(ip)

如果你在寻找所有的IP地址,你可以遍历IP -j a返回的字典列表

import subprocess
import json

list_of_dicts = json.loads(subprocess.run('ip -j a'.split(),capture_output=True).stdout.decode())

for interface in list_of_dicts:
    try:print(f"Interface: {interface['ifname']:10} IP: {interface['addr_info'][0]['local']}")
    except:pass