为了扩展@ renoor的答案，我编写了一个与str_replace() 100%向后兼容的函数。也就是说，可以用str_replace_limit()替换所有出现的str_replace()，而不会搞砸任何事情，即使是使用数组进行$search、$replace和/或$subject。

如果您想用($string===strval(intval(strval($string))))))替换函数调用，则该函数可以完全自包含，但我不建议这样做，因为valid_integer()在处理作为字符串提供的整数时是一个相当有用的函数。

注意:只要可能，str_replace_limit()将使用str_replace()来代替，因此所有对str_replace()的调用都可以用str_replace_limit()来代替，而不用担心对性能的影响。

使用

<?php
$search = 'a';
$replace = 'b';
$subject = 'abcabc';

$limit = -1; // No limit
$new_string = str_replace_limit($search, $replace, $subject, $count, $limit);
echo $count.' replacements -- '.$new_string;

2个替换——BBCBBC

$limit = 1; // Limit of 1
$new_string = str_replace_limit($search, $replace, $subject, $count, $limit);
echo $count.' replacements -- '.$new_string;

1个替换——bbcabc

$limit = 10; // Limit of 10
$new_string = str_replace_limit($search, $replace, $subject, $count, $limit);
echo $count.' replacements -- '.$new_string;

2个替换——BBCBBC

函数

<?php

/**
 * Checks if $string is a valid integer. Integers provided as strings (e.g. '2' vs 2)
 * are also supported.
 * @param mixed $string
 * @return bool Returns boolean TRUE if string is a valid integer, or FALSE if it is not 
 */
function valid_integer($string){
    // 1. Cast as string (in case integer is provided)
    // 1. Convert the string to an integer and back to a string
    // 2. Check if identical (note: 'identical', NOT just 'equal')
    // Note: TRUE, FALSE, and NULL $string values all return FALSE
    $string = strval($string);
    return ($string===strval(intval($string)));
}

/**
 * Replace $limit occurences of the search string with the replacement string
 * @param mixed $search The value being searched for, otherwise known as the needle. An
 * array may be used to designate multiple needles.
 * @param mixed $replace The replacement value that replaces found search values. An
 * array may be used to designate multiple replacements.
 * @param mixed $subject The string or array being searched and replaced on, otherwise
 * known as the haystack. If subject is an array, then the search and replace is
 * performed with every entry of subject, and the return value is an array as well. 
 * @param string $count If passed, this will be set to the number of replacements
 * performed.
 * @param int $limit The maximum possible replacements for each pattern in each subject
 * string. Defaults to -1 (no limit).
 * @return string This function returns a string with the replaced values.
 */
function str_replace_limit(
        $search,
        $replace,
        $subject,
        &$count,
        $limit = -1
    ){

    // Set some defaults
    $count = 0;

    // Invalid $limit provided. Throw a warning.
    if(!valid_integer($limit)){
        $backtrace = debug_backtrace();
        trigger_error('Invalid $limit `'.$limit.'` provided to '.__function__.'() in '.
                '`'.$backtrace[0]['file'].'` on line '.$backtrace[0]['line'].'. Expecting an '.
                'integer', E_USER_WARNING);
        return $subject;
    }

    // Invalid $limit provided. Throw a warning.
    if($limit<-1){
        $backtrace = debug_backtrace();
        trigger_error('Invalid $limit `'.$limit.'` provided to '.__function__.'() in '.
                '`'.$backtrace[0]['file'].'` on line '.$backtrace[0]['line'].'. Expecting -1 or '.
                'a positive integer', E_USER_WARNING);
        return $subject;
    }

    // No replacements necessary. Throw a notice as this was most likely not the intended
    // use. And, if it was (e.g. part of a loop, setting $limit dynamically), it can be
    // worked around by simply checking to see if $limit===0, and if it does, skip the
    // function call (and set $count to 0, if applicable).
    if($limit===0){
        $backtrace = debug_backtrace();
        trigger_error('Invalid $limit `'.$limit.'` provided to '.__function__.'() in '.
                '`'.$backtrace[0]['file'].'` on line '.$backtrace[0]['line'].'. Expecting -1 or '.
                'a positive integer', E_USER_NOTICE);
        return $subject;
    }

    // Use str_replace() whenever possible (for performance reasons)
    if($limit===-1){
        return str_replace($search, $replace, $subject, $count);
    }

    if(is_array($subject)){

        // Loop through $subject values and call this function for each one.
        foreach($subject as $key => $this_subject){

            // Skip values that are arrays (to match str_replace()).
            if(!is_array($this_subject)){

                // Call this function again for
                $this_function = __FUNCTION__;
                $subject[$key] = $this_function(
                        $search,
                        $replace,
                        $this_subject,
                        $this_count,
                        $limit
                );

                // Adjust $count
                $count += $this_count;

                // Adjust $limit, if not -1
                if($limit!=-1){
                    $limit -= $this_count;
                }

                // Reached $limit, return $subject
                if($limit===0){
                    return $subject;
                }

            }

        }

        return $subject;

    } elseif(is_array($search)){
        // Only treat $replace as an array if $search is also an array (to match str_replace())

        // Clear keys of $search (to match str_replace()).
        $search = array_values($search);

        // Clear keys of $replace, if applicable (to match str_replace()).
        if(is_array($replace)){
            $replace = array_values($replace);
        }

        // Loop through $search array.
        foreach($search as $key => $this_search){

            // Don't support multi-dimensional arrays (to match str_replace()).
            $this_search = strval($this_search);

            // If $replace is an array, use the value of $replace[$key] as the replacement. If
            // $replace[$key] doesn't exist, just an empty string (to match str_replace()).
            if(is_array($replace)){
                if(array_key_exists($key, $replace)){
                    $this_replace = strval($replace[$key]);
                } else {
                    $this_replace = '';
                }
            } else {
                $this_replace = strval($replace);
            }

            // Call this function again for
            $this_function = __FUNCTION__;
            $subject = $this_function(
                    $this_search,
                    $this_replace,
                    $subject,
                    $this_count,
                    $limit
            );

            // Adjust $count
            $count += $this_count;

            // Adjust $limit, if not -1
            if($limit!=-1){
                $limit -= $this_count;
            }

            // Reached $limit, return $subject
            if($limit===0){
                return $subject;
            }

        }

        return $subject;

    } else {
        $search = strval($search);
        $replace = strval($replace);

        // Get position of first $search
        $pos = strpos($subject, $search);

        // Return $subject if $search cannot be found
        if($pos===false){
            return $subject;
        }

        // Get length of $search, to make proper replacement later on
        $search_len = strlen($search);

        // Loop until $search can no longer be found, or $limit is reached
        for($i=0;(($i<$limit)||($limit===-1));$i++){

            // Replace 
            $subject = substr_replace($subject, $replace, $pos, $search_len);

            // Increase $count
            $count++;

            // Get location of next $search
            $pos = strpos($subject, $search);

            // Break out of loop if $needle
            if($pos===false){
                break;
            }

        }

        // Return new $subject
        return $subject;

    }

}

我创建了这个小函数，用limit替换字符串上的字符串(区分大小写)，而不需要Regexp。它工作得很好。

function str_replace_limit($search, $replace, $string, $limit = 1) {
    $pos = strpos($string, $search);

    if ($pos === false) {
        return $string;
    }

    $searchLen = strlen($search);

    for ($i = 0; $i < $limit; $i++) {
        $string = substr_replace($string, $replace, $pos, $searchLen);

        $pos = strpos($string, $search);

        if ($pos === false) {
            break;
        }
    }

    return $string;
}

使用示例:

$search  = 'foo';
$replace = 'bar';
$string  = 'foo wizard makes foo brew for evil foo and jack';
$limit   = 2;

$replaced = str_replace_limit($search, $replace, $string, $limit);

echo $replaced;
// bar wizard makes bar brew for evil foo and jack

$string = 'this is my world, not my world';
$find = 'world';
$replace = 'farm';
$result = preg_replace("/$find/",$replace,$string,1);
echo $result;

对于字符串

$string = 'OOO.OOO.OOO.S';
$search = 'OOO';
$replace = 'B';

//replace ONLY FIRST occurance of "OOO" with "B"
    $string = substr_replace($string,$replace,0,strlen($search));
    //$string => B.OOO.OOO.S

//replace ONLY LAST occurance of "OOOO" with "B"
    $string = substr_replace($string,$replace,strrpos($string,$search),strlen($search)) 
    //$string => OOO.OOO.B.S

    //replace ONLY LAST occurance of "OOOO" with "B"
    $string = strrev(implode(strrev($replace),explode(strrev($search),strrev($string),2)))
    //$string => OOO.OOO.B.S

对于单个字符

$string[strpos($string,$search)] = $replace;


//EXAMPLE

$string = 'O.O.O.O.S';
$search = 'O';
$replace = 'B';

//replace ONLY FIRST occurance of "O" with "B" 
    $string[strpos($string,$search)] = $replace;  
    //$string => B.O.O.O.S

//replace ONLY LAST occurance of "O" with "B" 
    $string[strrpos($string,$search)] = $replace; 
    // $string => B.O.O.B.S

For循环解决方案

<?php
echo replaceFirstMatchedChar("&", "?", "/property/details&id=202&test=123#tab-6");

function replaceFirstMatchedChar($searchChar, $replaceChar, $str)
{
    for ($i = 0; $i < strlen($str); $i++) {

        if ($str[$i] == $searchChar) {
            $str[$i] = $replaceChar;
            break;
        }
    }
    return $str;
}

编辑:两个答案都已更新，现在是正确的。我将把答案留下，因为函数时间仍然是有用的。

“僵尸”和“太多php”的答案很不幸是不正确的。这是对僵尸发布的答案的修正(因为我没有足够的声誉来发表评论):

$pos = strpos($haystack,$needle);
if ($pos !== false) {
    $newstring = substr_replace($haystack,$replace,$pos,strlen($needle));
}

注意strlen($needle)，而不是strlen($replace)。Zombat的例子只有在针头和替代物长度相同的情况下才能正确工作。

下面是与PHP自己的str_replace具有相同签名的函数中的相同函数:

function str_replace_first($search, $replace, $subject) {
    $pos = strpos($subject, $search);
    if ($pos !== false) {
        return substr_replace($subject, $replace, $pos, strlen($search));
    }
    return $subject;
}

这是修改后的“too much php”的答案:

implode($replace, explode($search, $subject, 2));

注意最后的2而不是1。或函数格式:

function str_replace_first($search, $replace, $subject) {
    return implode($replace, explode($search, $subject, 2));
}

我对这两个函数进行了计时，当没有找到匹配时，第一个函数的速度是原来的两倍。当找到匹配时，它们的速度是一样的。