例如，垂直堆栈视图/滚动视图(使用EasyPeasy自动布局):

let scrollView = UIScrollView()
self.view.addSubview(scrollView)
scrollView <- [
    Edges(),
    Width().like(self.view)
]

let stackView = UIStackView(arrangedSubviews: yourSubviews)
stackView.axis = .vertical
stackView.distribution = .fill    
stackView.spacing = 10
scrollView.addSubview(stackView)
stackView <- [
    Edges(),
    Width().like(self.view)
]

只要确保每个子视图的高度都已定义!

如果有人正在寻找一个没有代码的解决方案，我创建了一个例子来完成这完全在故事板，使用自动布局。

你可以从github上得到。

基本上，要重新创建这个示例(用于垂直滚动):

创建一个UIScrollView，并设置它的约束。 添加一个UIStackView到UIScrollView 设置约束:前导，后尾，顶部和底部应该等于UIScrollView中的约束 在UIStackView和UIScrollView之间设置一个等宽约束。 在UIStackView上设置轴=垂直，对齐=填充，分布=等间距，间距= 0 添加一些uiview到UIStackView 运行

在第4步中将宽度交换为高度，并在第5步中设置轴=水平，以获得水平的UIStackView。

例如，垂直堆栈视图/滚动视图(使用EasyPeasy自动布局):

let scrollView = UIScrollView()
self.view.addSubview(scrollView)
scrollView <- [
    Edges(),
    Width().like(self.view)
]

let stackView = UIStackView(arrangedSubviews: yourSubviews)
stackView.axis = .vertical
stackView.distribution = .fill    
stackView.spacing = 10
scrollView.addSubview(stackView)
stackView <- [
    Edges(),
    Width().like(self.view)
]

只要确保每个子视图的高度都已定义!

这里投票最多的答案中的约束条件对我来说是有效的，我已经将在我的故事板中创建的约束条件的图像粘贴在下面。

我确实提到了两个问题，但其他人应该注意:

After adding constraints similar to those in in the accepted answer, I'd get the red autolayout error Need constraints for: X position or width. This was solved by adding a UILabel as a subview of the stack view. I'm adding the subviews programmatically, so I originally had no subviews on the storyboard. To get rid of the autolayout errors, add a subview to the storyboard, then remove it on load before adding your real subviews and constraints. I originally attempted to add UIButtons to the UIStackView. The buttons and views would load, but the scroll view would not scroll. This was solved by adding UILabels to the Stack View instead of buttons. Using the same constraints, this view hierarchy with the UILabels scrolls but the UIButtons does not. I'm confused by this issue, as the UIButtons do seem to have an IntrinsicContentSize (used by the Stack View). If anyone knows why the buttons don't work, I'd love to know why.

下面是我的视图层次结构和约束，供参考:

苹果的自动布局指南包括了一个关于使用滚动视图的完整部分。一些相关片段:

Pin the content view’s top, bottom, leading, and trailing edges to the scroll view’s corresponding edges. The content view now defines the scroll view’s content area. (Optional) To disable horizontal scrolling, set the content view’s width equal to the scroll view’s width. The content view now fills the scroll view horizontally. (Optional) To disable vertical scrolling, set the content view’s height equal to the scroll view’s height. The content view now fills the scroll view horizontally.

此外:

你的布局必须完全定义内容视图的大小(除了 . ...当内容视图比滚动视图高时，滚动视图允许垂直滚动。当内容视图比滚动视图宽时，滚动视图启用水平滚动。

To summarize, the scroll view's content view (in this case, a stack view) must be pinned to its edges and have its width and/or height otherwise constrained. That means that the contents of the stack view must be constrained (directly or indirectly) in the direction(s) in which scrolling is desired, which might mean adding a height constraint to each view inside a vertically scrolling stack view, for example. The following is an example of how to allow for vertical scrolling of a scroll view containing a stack view:

// Pin the edges of the stack view to the edges of the scroll view that contains it
stackView.topAnchor.constraint(equalTo: scrollView.topAnchor).isActive = true
stackView.leadingAnchor.constraint(equalTo: scrollView.leadingAnchor).isActive = true
stackView.trailingAnchor.constraint(equalTo: scrollView.trailingAnchor).isActive = true
stackView.bottomAnchor.constraint(equalTo: scrollView.bottomAnchor).isActive = true

// Set the width of the stack view to the width of the scroll view for vertical scrolling
stackView.widthAnchor.constraint(equalTo: scrollView.widthAnchor).isActive = true

当使用故事板做这件事时，每个人似乎都错过了修复乘数! 当你按照上面的步骤在任何人教程和重置常数为0，同时检查乘数，并将其重置为1，它将采取了一些其他因素时，视觉链接保持到位

我发现我可以在UIStackView中简单地做一个loooooooooong文本块挤压或拉伸

简单的 向滚动视图添加约束 左上右下，弊为0

向指向滚动条Content Layout Guide的堆栈视图添加约束

然后从框架布局指南中添加等宽或等高的约束。 选择:宽度如果内容需要垂直滚动，高度如果它需要水平滚动。

这是关键。编辑每个约束并将常数重置为0并将乘数设置回1!!!!!

如果你不这样做，它就会摇摇欲坠

如果它工作，你可以点击内部内容和鼠标滚动