为什么有两个嵌套迭代?对我来说，它只用一次迭代就产生了相同的数据列表:

for single_date in (start_date + timedelta(n) for n in range(day_count)):
    print ...

没有列表被存储，只有一个生成器被迭代。此外，生成器中的“if”似乎是不必要的。

毕竟，线性序列应该只需要一个迭代器，而不是两个。

与John Machin讨论后更新:

也许最优雅的解决方案是使用生成器函数来完全隐藏/抽象日期范围内的迭代:

from datetime import date, timedelta

def daterange(start_date, end_date):
    for n in range(int((end_date - start_date).days)):
        yield start_date + timedelta(n)

start_date = date(2013, 1, 1)
end_date = date(2015, 6, 2)
for single_date in daterange(start_date, end_date):
    print(single_date.strftime("%Y-%m-%d"))

注意:为了与内置的range()函数保持一致，此迭代在到达end_date之前停止。因此，对于包容性迭代使用第二天，就像使用range()一样。

我也有类似的问题，但我需要每月而不是每天迭代一次。

这就是我的解

import calendar
from datetime import datetime, timedelta

def days_in_month(dt):
    return calendar.monthrange(dt.year, dt.month)[1]

def monthly_range(dt_start, dt_end):
    forward = dt_end >= dt_start
    finish = False
    dt = dt_start

    while not finish:
        yield dt.date()
        if forward:
            days = days_in_month(dt)
            dt = dt + timedelta(days=days)            
            finish = dt > dt_end
        else:
            _tmp_dt = dt.replace(day=1) - timedelta(days=1)
            dt = (_tmp_dt.replace(day=dt.day))
            finish = dt < dt_end

示例# 1

date_start = datetime(2016, 6, 1)
date_end = datetime(2017, 1, 1)

for p in monthly_range(date_start, date_end):
    print(p)

输出

2016-06-01
2016-07-01
2016-08-01
2016-09-01
2016-10-01
2016-11-01
2016-12-01
2017-01-01

例# 2

date_start = datetime(2017, 1, 1)
date_end = datetime(2016, 6, 1)

for p in monthly_range(date_start, date_end):
    print(p)

输出

2017-01-01
2016-12-01
2016-11-01
2016-10-01
2016-09-01
2016-08-01
2016-07-01
2016-06-01

你可以使用箭头:

这是一个来自文档的例子，在几个小时内迭代:

from arrow import Arrow

>>> start = datetime(2013, 5, 5, 12, 30)
>>> end = datetime(2013, 5, 5, 17, 15)
>>> for r in Arrow.range('hour', start, end):
...     print repr(r)
...
<Arrow [2013-05-05T12:30:00+00:00]>
<Arrow [2013-05-05T13:30:00+00:00]>
<Arrow [2013-05-05T14:30:00+00:00]>
<Arrow [2013-05-05T15:30:00+00:00]>
<Arrow [2013-05-05T16:30:00+00:00]>

要在几天内迭代，你可以这样使用:

>>> start = Arrow(2013, 5, 5)
>>> end = Arrow(2013, 5, 5)
>>> for r in Arrow.range('day', start, end):
...     print repr(r)

(没有检查你是否能通过datetime。日期对象，但无论如何箭头对象通常更容易)

下面是一个通用日期范围函数的代码，类似于Ber的答案，但更灵活:

def count_timedelta(delta, step, seconds_in_interval):
    """Helper function for iterate.  Finds the number of intervals in the timedelta."""
    return int(delta.total_seconds() / (seconds_in_interval * step))


def range_dt(start, end, step=1, interval='day'):
    """Iterate over datetimes or dates, similar to builtin range."""
    intervals = functools.partial(count_timedelta, (end - start), step)

    if interval == 'week':
        for i in range(intervals(3600 * 24 * 7)):
            yield start + datetime.timedelta(weeks=i) * step

    elif interval == 'day':
        for i in range(intervals(3600 * 24)):
            yield start + datetime.timedelta(days=i) * step

    elif interval == 'hour':
        for i in range(intervals(3600)):
            yield start + datetime.timedelta(hours=i) * step

    elif interval == 'minute':
        for i in range(intervals(60)):
            yield start + datetime.timedelta(minutes=i) * step

    elif interval == 'second':
        for i in range(intervals(1)):
            yield start + datetime.timedelta(seconds=i) * step

    elif interval == 'millisecond':
        for i in range(intervals(1 / 1000)):
            yield start + datetime.timedelta(milliseconds=i) * step

    elif interval == 'microsecond':
        for i in range(intervals(1e-6)):
            yield start + datetime.timedelta(microseconds=i) * step

    else:
        raise AttributeError("Interval must be 'week', 'day', 'hour' 'second', \
            'microsecond' or 'millisecond'.")

> pip install DateTimeRange

from datetimerange import DateTimeRange

def dateRange(start, end, step):
        rangeList = []
        time_range = DateTimeRange(start, end)
        for value in time_range.range(datetime.timedelta(days=step)):
            rangeList.append(value.strftime('%m/%d/%Y'))
        return rangeList

    dateRange("2018-09-07", "2018-12-25", 7)  

    Out[92]: 
    ['09/07/2018',
     '09/14/2018',
     '09/21/2018',
     '09/28/2018',
     '10/05/2018',
     '10/12/2018',
     '10/19/2018',
     '10/26/2018',
     '11/02/2018',
     '11/09/2018',
     '11/16/2018',
     '11/23/2018',
     '11/30/2018',
     '12/07/2018',
     '12/14/2018',
     '12/21/2018']

这可能更清楚:

from datetime import date, timedelta

start_date = date(2019, 1, 1)
end_date = date(2020, 1, 1)
delta = timedelta(days=1)
while start_date <= end_date:
    print(start_date.strftime("%Y-%m-%d"))
    start_date += delta