如果你想按名称杀死一个进程:

killall -9 -g someprocessname

or

pgrep someprocessname | xargs pkill -9 -g

使用进程组ID (PGID)杀死属于同一进程树的所有进程

使用默认信号(TERM = 15) 使用信号kill (9)

您可以从同一进程树的任何进程id (PID)中检索PGID

杀- - - $ (ps - o pgid = $ PID | grep - o '[0 - 9] * ')(信号) $(ps -o pgid= $PID | grep -o '[0-9]*')(信号kill)

特别感谢tanager和Speakus对$PID剩余空间和OSX兼容性的贡献。

解释

kill -9 -"$PGID" => Send signal 9 (KILL) to all child and grandchild... PGID=$(ps opgid= "$PID") => Retrieve the Process-Group-ID from any Process-ID of the tree, not only the Process-Parent-ID. A variation of ps opgid= $PID is ps -o pgid --no-headers $PID where pgid can be replaced by pgrp. But: ps inserts leading spaces when PID is less than five digits and right aligned as noticed by tanager. You can use: PGID=$(ps opgid= "$PID" | tr -d ' ') ps from OSX always print the header, therefore Speakus proposes: PGID="$( ps -o pgid "$PID" | grep [0-9] | tr -d ' ' )" grep -o [0-9]* prints successive digits only (does not print spaces or alphabetical headers).

更多命令行

PGID=$(ps -o pgid= $PID | grep -o [0-9]*)
kill -TERM -"$PGID"  # kill -15
kill -INT  -"$PGID"  # correspond to [CRTL+C] from keyboard
kill -QUIT -"$PGID"  # correspond to [CRTL+\] from keyboard
kill -CONT -"$PGID"  # restart a stopped process (above signals do not kill it)
sleep 2              # wait terminate process (more time if required)
kill -KILL -"$PGID"  # kill -9 if it does not intercept signals (or buggy)

限制

正如davide和Hubert Kario所注意到的，当kill被属于同一棵树的进程调用时，kill在终止整个树的kill之前可能会杀死自己。 因此，请确保使用具有不同process - group - id的进程运行该命令。

很长的故事

> cat run-many-processes.sh
#!/bin/sh
echo "ProcessID=$$ begins ($0)"
./child.sh background &
./child.sh foreground
echo "ProcessID=$$ ends ($0)"

> cat child.sh
#!/bin/sh
echo "ProcessID=$$ begins ($0)"
./grandchild.sh background &
./grandchild.sh foreground
echo "ProcessID=$$ ends ($0)"

> cat grandchild.sh
#!/bin/sh
echo "ProcessID=$$ begins ($0)"
sleep 9999
echo "ProcessID=$$ ends ($0)"

使用'&'在后台运行流程树

> ./run-many-processes.sh &    
ProcessID=28957 begins (./run-many-processes.sh)
ProcessID=28959 begins (./child.sh)
ProcessID=28958 begins (./child.sh)
ProcessID=28960 begins (./grandchild.sh)
ProcessID=28961 begins (./grandchild.sh)
ProcessID=28962 begins (./grandchild.sh)
ProcessID=28963 begins (./grandchild.sh)

> PID=$!                    # get the Parent Process ID
> PGID=$(ps opgid= "$PID")  # get the Process Group ID

> ps fj
 PPID   PID  PGID   SID TTY      TPGID STAT   UID   TIME COMMAND
28348 28349 28349 28349 pts/3    28969 Ss   33021   0:00 -bash
28349 28957 28957 28349 pts/3    28969 S    33021   0:00  \_ /bin/sh ./run-many-processes.sh
28957 28958 28957 28349 pts/3    28969 S    33021   0:00  |   \_ /bin/sh ./child.sh background
28958 28961 28957 28349 pts/3    28969 S    33021   0:00  |   |   \_ /bin/sh ./grandchild.sh background
28961 28965 28957 28349 pts/3    28969 S    33021   0:00  |   |   |   \_ sleep 9999
28958 28963 28957 28349 pts/3    28969 S    33021   0:00  |   |   \_ /bin/sh ./grandchild.sh foreground
28963 28967 28957 28349 pts/3    28969 S    33021   0:00  |   |       \_ sleep 9999
28957 28959 28957 28349 pts/3    28969 S    33021   0:00  |   \_ /bin/sh ./child.sh foreground
28959 28960 28957 28349 pts/3    28969 S    33021   0:00  |       \_ /bin/sh ./grandchild.sh background
28960 28964 28957 28349 pts/3    28969 S    33021   0:00  |       |   \_ sleep 9999
28959 28962 28957 28349 pts/3    28969 S    33021   0:00  |       \_ /bin/sh ./grandchild.sh foreground
28962 28966 28957 28349 pts/3    28969 S    33021   0:00  |           \_ sleep 9999
28349 28969 28969 28349 pts/3    28969 R+   33021   0:00  \_ ps fj

命令pkill -P $PID不杀死孙子:

> pkill -P "$PID"
./run-many-processes.sh: line 4: 28958 Terminated              ./child.sh background
./run-many-processes.sh: line 4: 28959 Terminated              ./child.sh foreground
ProcessID=28957 ends (./run-many-processes.sh)
[1]+  Done                    ./run-many-processes.sh

> ps fj
 PPID   PID  PGID   SID TTY      TPGID STAT   UID   TIME COMMAND
28348 28349 28349 28349 pts/3    28987 Ss   33021   0:00 -bash
28349 28987 28987 28349 pts/3    28987 R+   33021   0:00  \_ ps fj
    1 28963 28957 28349 pts/3    28987 S    33021   0:00 /bin/sh ./grandchild.sh foreground
28963 28967 28957 28349 pts/3    28987 S    33021   0:00  \_ sleep 9999
    1 28962 28957 28349 pts/3    28987 S    33021   0:00 /bin/sh ./grandchild.sh foreground
28962 28966 28957 28349 pts/3    28987 S    33021   0:00  \_ sleep 9999
    1 28961 28957 28349 pts/3    28987 S    33021   0:00 /bin/sh ./grandchild.sh background
28961 28965 28957 28349 pts/3    28987 S    33021   0:00  \_ sleep 9999
    1 28960 28957 28349 pts/3    28987 S    33021   0:00 /bin/sh ./grandchild.sh background
28960 28964 28957 28349 pts/3    28987 S    33021   0:00  \_ sleep 9999

命令kill——-$PGID杀死所有进程，包括孙子进程。

> kill --    -"$PGID"  # default signal is TERM (kill -15)
> kill -CONT -"$PGID"  # awake stopped processes
> kill -KILL -"$PGID"  # kill -9 to be sure

> ps fj
 PPID   PID  PGID   SID TTY      TPGID STAT   UID   TIME COMMAND
28348 28349 28349 28349 pts/3    29039 Ss   33021   0:00 -bash
28349 29039 29039 28349 pts/3    29039 R+   33021   0:00  \_ ps fj

结论

我注意到在这个例子中PID和PGID是相等的(28957)。 这就是为什么我一开始觉得杀了。-$PID就够了。但如果进程是在Makefile中生成的，则进程ID与组ID不同。

我认为kill——-$(ps -o pgid= $PID | grep -o[0-9]*)是当从不同的Group ID(另一个进程树)调用时杀死整个进程树的最好的简单技巧。

根据志刚的回答，这可以避免自我毁灭:

init_killtree() {
    local pid=$1 child

    for child in $(pgrep -P $pid); do
        init_killtree $child
    done
    [ $pid -ne $$ ] && kill -kill $pid
}

我知道这很老了，但这是我找到的更好的解决方案:

killtree() { 
    for p in $(pstree -p $1 | grep -o "([[:digit:]]*)" |grep -o "[[:digit:]]*" | tac);do
        echo Terminating: $p 
        kill $p
    done
}

现在是一些聪明的shell编程。

这种解决方案是有代价的，但至少它是基于日常迭代和递归的。通过仔细注意排版命令并在适当的地方将它们转换为声明或本地，可以将其转换为bash。

讨论

当终止一个进程时，必须面对这样的现实:它可能是许多子进程的父进程，而每个子进程又可能是更多子进程的父进程，等等等等。

怎么办呢?

如果有一个函数来测试进程是否有子进程，以及另一个函数来返回父进程的子pid就好了。

这样，游戏就简单多了，因为你可以创建一个循环来遍历pid列表，在杀死它之前检查每个pid是否有子代。如果没有子进程，则直接终止该进程。如果有子函数，递归地调用驱动函数，并将获得父函数子函数pid的函数的结果传递给它。

基本案例操作(流程没有子过程)。

#!/bin/ksh

function killProcess ()
{
    typeset -r PID=$1

    if [[ ! isProcess $PID ]]
    then
        echo -e "Process $PID cannot be terminated because it does not exist.\n" 1>&2
        return 1
    elif [[ kill -s TERM $PID ]] && [[ ! isProcess $PID ]]
    then
        echo -e "Process $PID was terminated.\n" 1>&2
        return 0
    elif kill -s KILL $PID
        echo -e "Process $PID killed with SIGKILL (9) signal. No time to clean up potential files.\n" 1>&2
        return 0
    elif isZombie $PID
    then
        echo -e "Process $PID in the zombie status.\n" 1>&2 
        return 2
    else
        echo -e "Process $PID is alive. SIGTERM and SIGKILL had no effect. It is not a zombie.\n" 1>&2
    fi

    return 3
}

function attemptToKillPid ()
{
    typeset -r PID=$1

    if killProcess $PID
    then 
        return 0
    fi

    ppid=$(getParentPid $pid)
    echo -e "Process $pid of parent $ppid was not able to be killed.\n" 1>&2
    return 1
}

一般案例操作(流程有子)。

function killPidFamily ()
{
    typeset -r PROCESSES=$*
    typeset -ir NUM_PROCESSES_TO_KILL=$(countLines $PROCESSES)
    typeset -i numKilledProcesses=0
    typeset ppid

    for pid in $PROCESSES
    do
        pid=$(trim $pid)

        if ! hasChildPids $pid
        then
            attemptToKillPid $pid && (( numKilledProcesses++ ))
        else
            killPidFamily $(getChildPids $pid) && attemptToKillPid $pid && (( numKilledProcesses++ ))
        fi
    done

    (( numKilledProcesses == NUM_PROCESSES_TO_KILL ))
    return $?
}

支持函数库。

#!/bin/ksh

function trim ()
{
    echo -n "$1" | tr -d [:space:]
}

function countLines ()
{
    typeset -r $LIST=$*
    trim $(echo $LIST | wc -l | awk {'print $1'})
}

function getProcesses ()
{
    # NOTE: -o pgid below would be $4 in awk.

    ps -e -o comm,pid,ppid,pgid,user,ruid,euid,group,rgid,egid,etime,etimes,stat --no-headers
}

function getProcess ()
{
   typeset -r PID=$1
   ps -p $PID -o comm,pid,ppid,pgid,user,ruid,euid,group,rgid,egid,etime,etimes,stat --no-headers
}

function isProcess ()
{
    typeset -r PID=$1

    ps -p $PID -o pid --no-headers 1>&2
    return $?
}

function getProcessStatus ()
{
    typeset -r PID=$1
    trim $(ps -p $PID -o stat --no-headers)
}

function isZombie ()
{
    typeset -r PID=$1
    typeset processStatus

    processStatus=$(getProcessStatus $PID)

    [[ "$processStatus" == "Z" ]]
    return $?
}

function hasChildPids ()
{
    typeset -r PPID=$1
    echo $(getProcesses) | awk '{print $3}' | sort -n | uniq | grep "^${PPID}$"
    return $?
}

function getChildPids ()
{
    typeset -r PPID=$1
    echo $(getProcesses) | awk '{print $2, $3}' | sort -k 2 | awk "\$2 == $PPID {print \$1}" | sort -n
}

function getParentPid ()
{
    typeset -r PID=$1
    trim $(echo $(getProcess $PID) | awk '{print $3}')
}

通过这种方式，您可以确定流程树正在从分支被销毁，并向上移动到根。这有助于避免潜在的僵尸和其他不受欢迎的情况。

现在，您已经看到了执行此操作的最昂贵的方法(一次杀死一个进程)，研究如何更改此解决方案以使用PGID(进程组ID)。getProcesses()函数已经打印了PGID(在awk中为4美元)，所以学习如何使用它，或者不要使用它。

下面是@zhigang的答案的一个变种，它没有AWK，只依赖于Bash的本地解析可能性:

function killtree {
  kill -STOP "$1"
  ps -e -o pid= -o ppid= | while read -r pid ppid
                           do
                             [[ $ppid = $1 ]] || continue
                             killtree "$pid"  || true # Skip over failures
                           done
  kill -CONT "$1"          
  kill -TERM "$1"
}

它在mac和Linux上都运行得很好。在您不能依赖于管理流程组的情况下——比如在编写测试必须在多个环境中构建的软件的脚本时——这种遍历树技术绝对是有用的。