我得到这段代码通过PHP隐蔽大小字节。

现在我想使用JavaScript将这些大小转换为人类可读的大小。我尝试将这段代码转换为JavaScript,看起来像这样:

function formatSizeUnits(bytes){
  if      (bytes >= 1073741824) { bytes = (bytes / 1073741824).toFixed(2) + " GB"; }
  else if (bytes >= 1048576)    { bytes = (bytes / 1048576).toFixed(2) + " MB"; }
  else if (bytes >= 1024)       { bytes = (bytes / 1024).toFixed(2) + " KB"; }
  else if (bytes > 1)           { bytes = bytes + " bytes"; }
  else if (bytes == 1)          { bytes = bytes + " byte"; }
  else                          { bytes = "0 bytes"; }
  return bytes;
}

这是正确的做法吗?有没有更简单的方法?


当前回答

将字节格式化为最符合逻辑大小(KB、MB或GB)的实用程序方法。

Number.prototype.formatBytes = function() { var单位= ['B', 'KB', 'MB', 'GB', 'TB'], 字节= this, 我; For (i = 0;>= 1024 && I < 4;我+ +){ 字节/= 1024; } return bytes.toFixed(2) + units[i]; } 令a = 235678;/ /字节 console.log (a.formatBytes ());//结果为230.15KB

其他回答

当与字节相关时,有两种真实的方法来表示大小,它们是SI单位(10^3)或IEC单位(2^10)。也有JEDEC,但他们的方法是模糊的和令人困惑的。我注意到其他示例有错误,例如使用KB而不是KB来表示千字节,因此我决定编写一个函数,使用当前接受的度量单位的范围来解决这些情况。

在结尾有一个格式化的地方,这将使数字看起来更好一点(至少在我看来),如果它不适合你的目的,请随意删除这个格式。

享受。

// pBytes: the size in bytes to be converted.
// pUnits: 'si'|'iec' si units means the order of magnitude is 10^3, iec uses 2^10

function prettyNumber(pBytes, pUnits) {
    // Handle some special cases
    if(pBytes == 0) return '0 Bytes';
    if(pBytes == 1) return '1 Byte';
    if(pBytes == -1) return '-1 Byte';

    var bytes = Math.abs(pBytes)
    if(pUnits && pUnits.toLowerCase() && pUnits.toLowerCase() == 'si') {
        // SI units use the Metric representation based on 10^3 as a order of magnitude
        var orderOfMagnitude = Math.pow(10, 3);
        var abbreviations = ['Bytes', 'kB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'];
    } else {
        // IEC units use 2^10 as an order of magnitude
        var orderOfMagnitude = Math.pow(2, 10);
        var abbreviations = ['Bytes', 'KiB', 'MiB', 'GiB', 'TiB', 'PiB', 'EiB', 'ZiB', 'YiB'];
    }
    var i = Math.floor(Math.log(bytes) / Math.log(orderOfMagnitude));
    var result = (bytes / Math.pow(orderOfMagnitude, i));

    // This will get the sign right
    if(pBytes < 0) {
        result *= -1;
    }

    // This bit here is purely for show. it drops the percision on numbers greater than 100 before the units.
    // it also always shows the full number of bytes if bytes is the unit.
    if(result >= 99.995 || i==0) {
        return result.toFixed(0) + ' ' + abbreviations[i];
    } else {
        return result.toFixed(2) + ' ' + abbreviations[i];
    }
}
const byteConversion = (bytes: number, decimals = 2) => {
if (bytes === 0) return '0 B';

const kiloByte = 1000;
const decimal = decimals < 0 ? 0 : decimals;
const sizes = ['B', 'KB', 'MB', 'GB', 'TB', 'PB', 'EB', 'ZB', 'YB'];

const i: number = Math.floor(Math.log(bytes) / Math.log(kiloByte));

return `${parseFloat((bytes / kiloByte ** i).toFixed(decimal))} ${sizes[i]}`;

};

var大小=[“字节”,“知识库”,“m”,“g”,“结核”,“铅”、“海尔哥哥”,“ZB”,“YB”); 函数formatBytes(字节,小数){ For (var I = 0, r = bytes, b = 1024;R > b;I ++) r /= b; 返回' ${parseFloat(r.toFixed(decimal))} ${SIZES[i]} '; }

函数by睾丸(字节){ const sizes = ['Bytes', 'KB', 'MB', 'GB', 'TB']; If (bytes === 0)返回'n/a'; const i = Math.min(Math.floor(Math.log(bytes) / Math.log(1024))),大小。长度- 1); 如果(i === 0)返回' ${bytes} ${sizes[i]} '; 返回“${(字节/(1024 * *我)).toFixed(1)} ${大小[我]}'; } console.log (bytesToSize (400000)) console.log (bytesToSize (5000000))

这对我很有用。

bytesForHuman(bytes) {
    let units = ['B', 'KB', 'MB', 'GB', 'TB', 'PB']

    let i = 0
    
    for (i; bytes > 1024; i++) {
        bytes /= 1024;
    }

    return bytes.toFixed(1) + ' ' + units[i]
}