下面的代码对我来说没有任何问题

Gradle

// Retrofit
implementation 'com.squareup.retrofit2:retrofit:2.5.0'
implementation 'com.squareup.retrofit2:converter-gson:2.5.0'
implementation 'com.squareup.okhttp3:logging-interceptor:3.12.1'

RetrofitClient

HttpLoggingInterceptor logging = new HttpLoggingInterceptor();
logging.setLevel(HttpLoggingInterceptor.Level.BODY);

OkHttpClient client = new OkHttpClient.Builder()
        .addInterceptor(logging)
        .build();

retrofit = new Retrofit.Builder()
        .baseUrl(BASE_URL)
        .addConverterFactory(GsonConverterFactory.create())
        .client(client)
        .build();

你也可以通过进入Android Studio底部的Profiler标签来验证结果，然后点击+号开始一个新的会话，然后在“网络”中选择所需的峰值。在那里你可以得到所有的东西，但是又麻烦又慢。请看下图。

我面临的主要问题是动态添加头文件并将它们记录到调试日志中。我试着增加两个拦截器。一个用于日志记录，一个用于添加动态报头(令牌授权)。问题是我们可以。addinterceptor或。addnetworkinterceptor。正如Jake Wharton对我说的:“网络拦截器总是紧跟在应用程序拦截器之后。看到https://github.com/square/okhttp/wiki/Interceptors”。下面是头文件和日志的工作示例:

OkHttpClient httpClient = new OkHttpClient.Builder()
            //here we can add Interceptor for dynamical adding headers
            .addNetworkInterceptor(new Interceptor() {
                @Override
                public Response intercept(Chain chain) throws IOException {
                    Request request = chain.request().newBuilder().addHeader("test", "test").build();
                    return chain.proceed(request);
                }
            })
            //here we adding Interceptor for full level logging
            .addNetworkInterceptor(new HttpLoggingInterceptor().setLevel(HttpLoggingInterceptor.Level.BODY))
            .build();

    Retrofit retrofit = new Retrofit.Builder()
            .addConverterFactory(GsonConverterFactory.create(gsonBuilder.create()))
            .addCallAdapterFactory(RxJavaCallAdapterFactory.create())
            .client(httpClient)
            .baseUrl(AppConstants.SERVER_ADDRESS)
            .build();

我不知道setLogLevel()是否会在最终2.0版本的Retrofit中返回，但现在你可以使用一个拦截器来记录日志。

一个很好的例子可以在OkHttp wiki上找到:https://github.com/square/okhttp/wiki/Interceptors

OkHttpClient client = new OkHttpClient();
client.interceptors().add(new LoggingInterceptor());

Retrofit retrofit = new Retrofit.Builder()
        .baseUrl("http://www.yourjsonapi.com")
        .addConverterFactory(GsonConverterFactory.create())
        .client(client)
        .build();

下面的代码对我来说没有任何问题

Gradle

// Retrofit
implementation 'com.squareup.retrofit2:retrofit:2.5.0'
implementation 'com.squareup.retrofit2:converter-gson:2.5.0'
implementation 'com.squareup.okhttp3:logging-interceptor:3.12.1'

RetrofitClient

HttpLoggingInterceptor logging = new HttpLoggingInterceptor();
logging.setLevel(HttpLoggingInterceptor.Level.BODY);

OkHttpClient client = new OkHttpClient.Builder()
        .addInterceptor(logging)
        .build();

retrofit = new Retrofit.Builder()
        .baseUrl(BASE_URL)
        .addConverterFactory(GsonConverterFactory.create())
        .client(client)
        .build();

你也可以通过进入Android Studio底部的Profiler标签来验证结果，然后点击+号开始一个新的会话，然后在“网络”中选择所需的峰值。在那里你可以得到所有的东西，但是又麻烦又慢。请看下图。

我找到了打印登录改造的方法

OkHttpClient okHttpClient = new OkHttpClient.Builder()
            .addInterceptor(new Interceptor() {
                @Override
                public Response intercept(Chain chain) throws IOException {
                    Request request = chain.request();
                    if (BuildConfig.DEBUG) {
                        Log.e(getClass().getName(), request.method() + " " + request.url());
                        Log.e(getClass().getName(), "" + request.header("Cookie"));
                        RequestBody rb = request.body();
                        Buffer buffer = new Buffer();
                        if (rb != null)
                            rb.writeTo(buffer);
                        LogUtils.LOGE(getClass().getName(), "Payload- " + buffer.readUtf8());
                    }
                    return chain.proceed(request);
                }
            })
            .readTimeout(60, TimeUnit.SECONDS)
            .connectTimeout(60, TimeUnit.SECONDS)
            .build();

            iServices = new Retrofit.Builder()
                    .baseUrl("Your Base URL")
                    .client(okHttpClient)
                    .addConverterFactory(GsonConverterFactory.create())
                    .build()
                    .create(Your Service Interface .class);

对我有用。

下面是一个拦截器，它同时记录请求和响应体(使用Timber，基于OkHttp文档中的一个例子和其他一些SO答案):

public class TimberLoggingInterceptor implements Interceptor {
    @Override
    public Response intercept(Chain chain) throws IOException {
        Request request = chain.request();

        long t1 = System.nanoTime();
        Timber.i("Sending request %s on %s%n%s", request.url(), chain.connection(), request.headers());
        Timber.v("REQUEST BODY BEGIN\n%s\nREQUEST BODY END", bodyToString(request));

        Response response = chain.proceed(request);

        ResponseBody responseBody = response.body();
        String responseBodyString = response.body().string();

        // now we have extracted the response body but in the process
        // we have consumed the original reponse and can't read it again
        // so we need to build a new one to return from this method

        Response newResponse = response.newBuilder().body(ResponseBody.create(responseBody.contentType(), responseBodyString.getBytes())).build();

        long t2 = System.nanoTime();
        Timber.i("Received response for %s in %.1fms%n%s", response.request().url(), (t2 - t1) / 1e6d, response.headers());
        Timber.v("RESPONSE BODY BEGIN:\n%s\nRESPONSE BODY END", responseBodyString);

        return newResponse;
    }

    private static String bodyToString(final Request request){

        try {
            final Request copy = request.newBuilder().build();
            final Buffer buffer = new Buffer();
            copy.body().writeTo(buffer);
            return buffer.readUtf8();
        } catch (final IOException e) {
            return "did not work";
        }
    }
}