我正在写一个shell脚本，需要检查终端应用程序是否已安装。我想使用TRY/CATCH命令来做到这一点，除非有更整洁的方法。
当前回答
你可以使用trap:
try {block A} catch {block B} finally {block C}
翻译:
(
set -Ee
function _catch {
block B
exit 0 # optional; use if you don't want to propagate (rethrow) error to outer shell
}
function _finally {
block C
}
trap _catch ERR
trap _finally EXIT
block A
)
其他回答
以下是我在另一个答案中使用的简化脚本的完整副本。除了额外的错误检查之外，还有一个别名允许用户更改现有别名的名称。语法如下所示。如果省略new_alias参数，则别名将被删除。
ChangeAlias old_alias [new_alias]
完整的脚本如下所示。
common.GetAlias() {
local "oldname=${1:-0}"
if [[ $oldname =~ ^[0-9]+$ && oldname+1 -lt ${#FUNCNAME[@]} ]]; then
oldname="${FUNCNAME[oldname + 1]}"
fi
name="common_${oldname#common.}"
echo "${!name:-$oldname}"
}
common.Alias() {
if [[ $# -ne 2 || -z $1 || -z $2 ]]; then
echo "$(common.GetAlias): The must be only two parameters of nonzero length" >&2
return 1;
fi
eval "alias $1='$2'"
local "f=${2##*common.}"
f="${f%%;*}"
local "v=common_$f"
f="common.$f"
if [[ -n ${!v:-} ]]; then
echo "$(common.GetAlias): $1: Function \`$f' already paired with name \`${!v}'" >&2
return 1;
fi
shopt -s expand_aliases
eval "$v=\"$1\""
}
common.ChangeAlias() {
if [[ $# -lt 1 || $# -gt 2 ]]; then
echo "usage: $(common.GetAlias) old_name [new_name]" >&2
return "1"
elif ! alias "$1" &>"/dev/null"; then
echo "$(common.GetAlias): $1: Name not found" >&2
return 1;
fi
local "s=$(alias "$1")"
s="${s#alias $1=\'}"
s="${s%\'}"
local "f=${s##*common.}"
f="${f%%;*}"
local "v=common_$f"
f="common.$f"
if [[ ${!v:-} != "$1" ]]; then
echo "$(common.GetAlias): $1: Name not paired with a function \`$f'" >&2
return 1;
elif [[ $# -gt 1 ]]; then
eval "alias $2='$s'"
eval "$v=\"$2\""
else
unset "$v"
fi
unalias "$1"
}
common.Alias exception 'common.Exception'
common.Alias throw 'common.Throw'
common.Alias try '{ if common.Try; then'
common.Alias yrt 'common.EchoExitStatus; fi; common.yrT; }'
common.Alias catch '{ while common.Catch'
common.Alias hctac 'common.hctaC -r; done; common.hctaC; }'
common.Alias finally '{ if common.Finally; then'
common.Alias yllanif 'fi; common.yllaniF; }'
common.Alias caught 'common.Caught'
common.Alias EchoExitStatus 'common.EchoExitStatus'
common.Alias EnableThrowOnError 'common.EnableThrowOnError'
common.Alias DisableThrowOnError 'common.DisableThrowOnError'
common.Alias GetStatus 'common.GetStatus'
common.Alias SetStatus 'common.SetStatus'
common.Alias GetMessage 'common.GetMessage'
common.Alias MessageCount 'common.MessageCount'
common.Alias CopyMessages 'common.CopyMessages'
common.Alias TryCatchFinally 'common.TryCatchFinally'
common.Alias DefaultErrHandler 'common.DefaultErrHandler'
common.Alias DefaultUnhandled 'common.DefaultUnhandled'
common.Alias CallStack 'common.CallStack'
common.Alias ChangeAlias 'common.ChangeAlias'
common.Alias TryCatchFinallyAlias 'common.Alias'
common.CallStack() {
local -i "i" "j" "k" "subshell=${2:-0}" "wi" "wl" "wn"
local "format= %*s %*s %-*s %s\n" "name"
eval local "lineno=('' ${BASH_LINENO[@]})"
for (( i=${1:-0},j=wi=wl=wn=0; i<${#FUNCNAME[@]}; ++i,++j )); do
name="$(common.GetAlias "$i")"
let "wi = ${#j} > wi ? wi = ${#j} : wi"
let "wl = ${#lineno[i]} > wl ? wl = ${#lineno[i]} : wl"
let "wn = ${#name} > wn ? wn = ${#name} : wn"
done
for (( i=${1:-0},j=0; i<${#FUNCNAME[@]}; ++i,++j )); do
! let "k = ${#FUNCNAME[@]} - i - 1"
name="$(common.GetAlias "$i")"
printf "$format" "$wi" "$j" "$wl" "${lineno[i]}" "$wn" "$name" "${BASH_SOURCE[i]}"
done
}
common.Echo() {
[[ $common_options != *d* ]] || echo "$@" >"$common_file"
}
common.DefaultErrHandler() {
echo "Orginal Status: $common_status"
echo "Exception Type: ERR"
}
common.Exception() {
common.TryCatchFinallyVerify || return
if [[ $# -eq 0 ]]; then
echo "$(common.GetAlias): At least one parameter is required" >&2
return "1"
elif [[ ${#1} -gt 16 || -n ${1%%[0-9]*} || 10#$1 -lt 1 || 10#$1 -gt 255 ]]; then
echo "$(common.GetAlias): $1: First parameter was not an integer between 1 and 255" >&2
return "1"
fi
let "common_status = 10#$1"
shift
common_messages=()
for message in "$@"; do
common_messages+=("$message")
done
if [[ $common_options == *c* ]]; then
echo "Call Stack:" >"$common_fifo"
common.CallStack "2" >"$common_fifo"
fi
}
common.Throw() {
common.TryCatchFinallyVerify || return
local "message"
if ! common.TryCatchFinallyExists; then
echo "$(common.GetAlias): No Try-Catch-Finally exists" >&2
return "1"
elif [[ $# -eq 0 && common_status -eq 0 ]]; then
echo "$(common.GetAlias): No previous unhandled exception" >&2
return "1"
elif [[ $# -gt 0 && ( ${#1} -gt 16 || -n ${1%%[0-9]*} || 10#$1 -lt 1 || 10#$1 -gt 255 ) ]]; then
echo "$(common.GetAlias): $1: First parameter was not an integer between 1 and 255" >&2
return "1"
fi
common.Echo -n "In Throw ?=$common_status "
common.Echo "try=$common_trySubshell subshell=$BASH_SUBSHELL #=$#"
if [[ $common_options == *k* ]]; then
common.CallStack "2" >"$common_file"
fi
if [[ $# -gt 0 ]]; then
let "common_status = 10#$1"
shift
for message in "$@"; do
echo "$message" >"$common_fifo"
done
if [[ $common_options == *c* ]]; then
echo "Call Stack:" >"$common_fifo"
common.CallStack "2" >"$common_fifo"
fi
elif [[ ${#common_messages[@]} -gt 0 ]]; then
for message in "${common_messages[@]}"; do
echo "$message" >"$common_fifo"
done
fi
chmod "0400" "$common_fifo"
common.Echo "Still in Throw $=$common_status subshell=$BASH_SUBSHELL #=$# -=$-"
exit "$common_status"
}
common.ErrHandler() {
common_status=$?
trap ERR
common.Echo -n "In ErrHandler ?=$common_status debug=$common_options "
common.Echo "try=$common_trySubshell subshell=$BASH_SUBSHELL order=$common_order"
if [[ -w "$common_fifo" ]]; then
if [[ $common_options != *e* ]]; then
common.Echo "ErrHandler is ignoring"
common_status="0"
return "$common_status" # value is ignored
fi
if [[ $common_options == *k* ]]; then
common.CallStack "2" >"$common_file"
fi
common.Echo "Calling ${common_errHandler:-}"
eval "${common_errHandler:-} \"${BASH_LINENO[0]}\" \"${BASH_SOURCE[1]}\" \"${FUNCNAME[1]}\" >$common_fifo <$common_fifo"
if [[ $common_options == *c* ]]; then
echo "Call Stack:" >"$common_fifo"
common.CallStack "2" >"$common_fifo"
fi
chmod "0400" "$common_fifo"
fi
common.Echo "Still in ErrHandler $=$common_status subshell=$BASH_SUBSHELL -=$-"
if [[ common_trySubshell -eq BASH_SUBSHELL ]]; then
return "$common_status" # value is ignored
else
exit "$common_status"
fi
}
common.Token() {
local "name"
case $1 in
b) name="before";;
t) name="$common_Try";;
y) name="$common_yrT";;
c) name="$common_Catch";;
h) name="$common_hctaC";;
f) name="$common_yllaniF";;
l) name="$common_Finally";;
*) name="unknown";;
esac
echo "$name"
}
common.TryCatchFinallyNext() {
common.ShellInit
local "previous=$common_order" "errmsg"
common_order="$2"
if [[ $previous != $1 ]]; then
errmsg="${BASH_SOURCE[2]}: line ${BASH_LINENO[1]}: syntax error_near unexpected token \`$(common.Token "$2")'"
echo "$errmsg" >&2
[[ /dev/fd/2 -ef $common_file ]] || echo "$errmsg" >"$common_file"
kill -s INT 0
return "1"
fi
}
common.ShellInit() {
if [[ common_initSubshell -ne BASH_SUBSHELL ]]; then
common_initSubshell="$BASH_SUBSHELL"
common_order="b"
fi
}
common.Try() {
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[byhl]" "t" || return
common_status="0"
common_subshell="$common_trySubshell"
common_trySubshell="$BASH_SUBSHELL"
common_messages=()
common.Echo "-------------> Setting try=$common_trySubshell at subshell=$BASH_SUBSHELL"
}
common.yrT() {
local "status=$?"
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[t]" "y" || return
common.Echo -n "Entered yrT ?=$status status=$common_status "
common.Echo "try=$common_trySubshell subshell=$BASH_SUBSHELL"
if [[ common_status -ne 0 ]]; then
common.Echo "Build message array. ?=$common_status, subshell=$BASH_SUBSHELL"
local "message=" "eof=TRY_CATCH_FINALLY_END_OF_MESSAGES_$RANDOM"
chmod "0600" "$common_fifo"
echo "$eof" >"$common_fifo"
common_messages=()
while read "message"; do
common.Echo "----> $message"
[[ $message != *$eof ]] || break
common_messages+=("$message")
done <"$common_fifo"
fi
common.Echo "In ytT status=$common_status"
common_trySubshell="$common_subshell"
}
common.Catch() {
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[yh]" "c" || return
[[ common_status -ne 0 ]] || return "1"
local "parameter" "pattern" "value"
local "toggle=true" "compare=p" "options=$-"
local -i "i=-1" "status=0"
set -f
for parameter in "$@"; do
if "$toggle"; then
toggle="false"
if [[ $parameter =~ ^-[notepr]$ ]]; then
compare="${parameter#-}"
continue
fi
fi
toggle="true"
while "true"; do
eval local "patterns=($parameter)"
if [[ ${#patterns[@]} -gt 0 ]]; then
for pattern in "${patterns[@]}"; do
[[ i -lt ${#common_messages[@]} ]] || break
if [[ i -lt 0 ]]; then
value="$common_status"
else
value="${common_messages[i]}"
fi
case $compare in
[ne]) [[ ! $value == "$pattern" ]] || break 2;;
[op]) [[ ! $value == $pattern ]] || break 2;;
[tr]) [[ ! $value =~ $pattern ]] || break 2;;
esac
done
fi
if [[ $compare == [not] ]]; then
let "++i,1"
continue 2
else
status="1"
break 2
fi
done
if [[ $compare == [not] ]]; then
status="1"
break
else
let "++i,1"
fi
done
[[ $options == *f* ]] || set +f
return "$status"
}
common.hctaC() {
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[c]" "h" || return
[[ $# -ne 1 || $1 != -r ]] || common_status="0"
}
common.Finally() {
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[ych]" "f" || return
}
common.yllaniF() {
common.TryCatchFinallyVerify || return
common.TryCatchFinallyNext "[f]" "l" || return
[[ common_status -eq 0 ]] || common.Throw
}
common.Caught() {
common.TryCatchFinallyVerify || return
[[ common_status -eq 0 ]] || return 1
}
common.EchoExitStatus() {
return "${1:-$?}"
}
common.EnableThrowOnError() {
common.TryCatchFinallyVerify || return
[[ $common_options == *e* ]] || common_options+="e"
}
common.DisableThrowOnError() {
common.TryCatchFinallyVerify || return
common_options="${common_options/e}"
}
common.GetStatus() {
common.TryCatchFinallyVerify || return
echo "$common_status"
}
common.SetStatus() {
common.TryCatchFinallyVerify || return
if [[ $# -ne 1 ]]; then
echo "$(common.GetAlias): $#: Wrong number of parameters" >&2
return "1"
elif [[ ${#1} -gt 16 || -n ${1%%[0-9]*} || 10#$1 -lt 1 || 10#$1 -gt 255 ]]; then
echo "$(common.GetAlias): $1: First parameter was not an integer between 1 and 255" >&2
return "1"
fi
let "common_status = 10#$1"
}
common.GetMessage() {
common.TryCatchFinallyVerify || return
local "upper=${#common_messages[@]}"
if [[ upper -eq 0 ]]; then
echo "$(common.GetAlias): $1: There are no messages" >&2
return "1"
elif [[ $# -ne 1 ]]; then
echo "$(common.GetAlias): $#: Wrong number of parameters" >&2
return "1"
elif [[ ${#1} -gt 16 || -n ${1%%[0-9]*} || 10#$1 -ge upper ]]; then
echo "$(common.GetAlias): $1: First parameter was an invalid index" >&2
return "1"
fi
echo "${common_messages[$1]}"
}
common.MessageCount() {
common.TryCatchFinallyVerify || return
echo "${#common_messages[@]}"
}
common.CopyMessages() {
common.TryCatchFinallyVerify || return
if [[ $# -ne 1 ]]; then
echo "$(common.GetAlias): $#: Wrong number of parameters" >&2
return "1"
elif [[ ${#common_messages} -gt 0 ]]; then
eval "$1=(\"\${common_messages[@]}\")"
else
eval "$1=()"
fi
}
common.TryCatchFinallyExists() {
[[ ${common_fifo:-u} != u ]]
}
common.TryCatchFinallyVerify() {
local "name"
if ! common.TryCatchFinallyExists; then
echo "$(common.GetAlias "1"): No Try-Catch-Finally exists" >&2
return "2"
fi
}
common.GetOptions() {
local "opt"
local "name=$(common.GetAlias "1")"
if common.TryCatchFinallyExists; then
echo "$name: A Try-Catch-Finally already exists" >&2
return "1"
fi
let "OPTIND = 1"
let "OPTERR = 0"
while getopts ":cdeh:ko:u:v:" opt "$@"; do
case $opt in
c) [[ $common_options == *c* ]] || common_options+="c";;
d) [[ $common_options == *d* ]] || common_options+="d";;
e) [[ $common_options == *e* ]] || common_options+="e";;
h) common_errHandler="$OPTARG";;
k) [[ $common_options == *k* ]] || common_options+="k";;
o) common_file="$OPTARG";;
u) common_unhandled="$OPTARG";;
v) common_command="$OPTARG";;
\?) #echo "Invalid option: -$OPTARG" >&2
echo "$name: Illegal option: $OPTARG" >&2
return "1";;
:) echo "$name: Option requires an argument: $OPTARG" >&2
return "1";;
*) echo "$name: An error occurred while parsing options." >&2
return "1";;
esac
done
shift "$((OPTIND - 1))"
if [[ $# -lt 1 ]]; then
echo "$name: The fifo_file parameter is missing" >&2
return "1"
fi
common_fifo="$1"
if [[ ! -p $common_fifo ]]; then
echo "$name: $1: The fifo_file is not an open FIFO" >&2
return "1"
fi
shift
if [[ $# -lt 1 ]]; then
echo "$name: The function parameter is missing" >&2
return "1"
fi
common_function="$1"
if ! chmod "0600" "$common_fifo"; then
echo "$name: $common_fifo: Can not change file mode to 0600" >&2
return "1"
fi
local "message=" "eof=TRY_CATCH_FINALLY_END_OF_FILE_$RANDOM"
{ echo "$eof" >"$common_fifo"; } 2>"/dev/null"
if [[ $? -ne 0 ]]; then
echo "$name: $common_fifo: Can not write" >&2
return "1"
fi
{ while [[ $message != *$eof ]]; do
read "message"
done <"$common_fifo"; } 2>"/dev/null"
if [[ $? -ne 0 ]]; then
echo "$name: $common_fifo: Can not read" >&2
return "1"
fi
return "0"
}
common.DefaultUnhandled() {
local -i "i"
echo "-------------------------------------------------"
echo "$(common.GetAlias "common.TryCatchFinally"): Unhandeled exception occurred"
echo "Status: $(GetStatus)"
echo "Messages:"
for ((i=0; i<$(MessageCount); i++)); do
echo "$(GetMessage "$i")"
done
echo "-------------------------------------------------"
}
common.TryCatchFinally() {
local "common_file=/dev/fd/2"
local "common_errHandler=common.DefaultErrHandler"
local "common_unhandled=common.DefaultUnhandled"
local "common_options="
local "common_fifo="
local "common_function="
local "common_flags=$-"
local "common_trySubshell=-1"
local "common_initSubshell=-1"
local "common_subshell"
local "common_status=0"
local "common_order=b"
local "common_command="
local "common_messages=()"
local "common_handler=$(trap -p ERR)"
[[ -n $common_handler ]] || common_handler="trap ERR"
common.GetOptions "$@" || return "$?"
shift "$((OPTIND + 1))"
[[ -z $common_command ]] || common_command+="=$"
common_command+='("$common_function" "$@")'
set -E
set +e
trap "common.ErrHandler" ERR
if true; then
common.Try
eval "$common_command"
common.EchoExitStatus
common.yrT
fi
while common.Catch; do
"$common_unhandled" >&2
break
common.hctaC -r
done
common.hctaC
[[ $common_flags == *E* ]] || set +E
[[ $common_flags != *e* ]] || set -e
[[ $common_flags != *f* || $- == *f* ]] || set -f
[[ $common_flags == *f* || $- != *f* ]] || set +f
eval "$common_handler"
return "$((common_status?2:0))"
}
你可以:
#!/bin/bash
if <command> ; then # TRY
<do-whatever-you-want>
else # CATCH
echo 'Exception'
<do-whatever-you-want>
fi
Bash中有TRY CATCH命令吗?
不。
Bash不像在许多编程语言中那样拥有那么多奢侈的东西。
bash中没有try/catch;但是，可以使用&&或||实现类似的行为。
使用| |:
如果command1失败，则command2按如下方式运行
command1 || command2
类似地，使用&&，如果command1成功，command2将运行
try/catch最接近的近似如下
{ # try
command1 &&
#save your output
} || { # catch
# save log for exception
}
此外，bash还包含一些错误处理机制
set -e
如果任何简单的命令失败，它将停止脚本。
还有为什么不是if…else。它是你最好的朋友。
下面是一个在bash中实现try/catch/finally的脚本示例。
与此问题的其他答案一样，必须在退出子进程后捕获异常。
The example scripts start by creating an anonymous fifo, which is used to pass string messages from a command exception or throw to end of the closest try block. Here the messages are removed from the fifo and placed in an array variable. The status is returned through return and exit commands and placed in a different variable. To enter a catch block, this status must not be zero. Other requirements to enter a catch block are passed as parameters. If the end of a catch block is reached, then the status is set to zero. If the end of the finally block is reached and the status is still nonzero, then an implicit throw containing the messages and status is executed. The script requires the calling of the function trycatchfinally which contains an unhandled exception handler.
trycatchfinally命令的语法如下所示。
trycatchfinally [-cde] [-h ERR_handler] [-k] [-o debug_file] [-u unhandled_handler] [-v variable] fifo function
The -c option adds the call stack to the exception messages. The -d option enables debug output. The -e option enables command exceptions. The -h option allows the user to substitute their own command exception handler. The -k option adds the call stack to the debug output. The -o option replaces the default output file which is /dev/fd/2. The -u option allows the user to substitute their own unhandled exception handler. The -v option allows the user the option to pass back values though the use of Command Substitution. The fifo is the fifo filename. The function function is called by trycatchfinally as a subprocess.
注意:为了简化脚本，删除了cdko选项。
catch命令的语法如下所示。
catch [[-enoprt] list ...] ...
选项定义如下。第一个列表的值是状态。子值是消息。如果有更多的消息 列表，那么其余的消息将被忽略。
-e means [[ $value == "$string" ]] (the value has to match at least one string in the list) -n means [[ $value != "$string" ]] (the value can not match any of the strings in the list) -o means [[ $value != $pattern ]] (the value can not match any of the patterns in the list) -p means [[ $value == $pattern ]] (the value has to match at least one pattern in the list) -r means [[ $value =~ $regex ]] (the value has to match at least one extended regular expression in the list) -t means [[ ! $value =~ $regex ]] (the value can not match any of the extended regular expressions in the list)
try/catch/finally脚本如下所示。为了简化这个答案的脚本，删除了大部分错误检查。这样就减少了64%的尺寸。这个脚本的完整副本可以在我的其他答案中找到。
shopt -s expand_aliases
alias try='{ common.Try'
alias yrt='EchoExitStatus; common.yrT; }'
alias catch='{ while common.Catch'
alias hctac='common.hctaC; done; }'
alias finally='{ common.Finally'
alias yllanif='common.yllaniF; }'
DefaultErrHandler() {
echo "Orginal Status: $common_status"
echo "Exception Type: ERR"
}
exception() {
let "common_status = 10#$1"
shift
common_messages=()
for message in "$@"; do
common_messages+=("$message")
done
}
throw() {
local "message"
if [[ $# -gt 0 ]]; then
let "common_status = 10#$1"
shift
for message in "$@"; do
echo "$message" >"$common_fifo"
done
elif [[ ${#common_messages[@]} -gt 0 ]]; then
for message in "${common_messages[@]}"; do
echo "$message" >"$common_fifo"
done
fi
chmod "0400" "$common_fifo"
exit "$common_status"
}
common.ErrHandler() {
common_status=$?
trap ERR
if [[ -w "$common_fifo" ]]; then
if [[ $common_options != *e* ]]; then
common_status="0"
return
fi
eval "${common_errHandler:-} \"${BASH_LINENO[0]}\" \"${BASH_SOURCE[1]}\" \"${FUNCNAME[1]}\" >$common_fifo <$common_fifo"
chmod "0400" "$common_fifo"
fi
if [[ common_trySubshell -eq BASH_SUBSHELL ]]; then
return
else
exit "$common_status"
fi
}
common.Try() {
common_status="0"
common_subshell="$common_trySubshell"
common_trySubshell="$BASH_SUBSHELL"
common_messages=()
}
common.yrT() {
local "status=$?"
if [[ common_status -ne 0 ]]; then
local "message=" "eof=TRY_CATCH_FINALLY_END_OF_MESSAGES_$RANDOM"
chmod "0600" "$common_fifo"
echo "$eof" >"$common_fifo"
common_messages=()
while read "message"; do
[[ $message != *$eof ]] || break
common_messages+=("$message")
done <"$common_fifo"
fi
common_trySubshell="$common_subshell"
}
common.Catch() {
[[ common_status -ne 0 ]] || return "1"
local "parameter" "pattern" "value"
local "toggle=true" "compare=p" "options=$-"
local -i "i=-1" "status=0"
set -f
for parameter in "$@"; do
if "$toggle"; then
toggle="false"
if [[ $parameter =~ ^-[notepr]$ ]]; then
compare="${parameter#-}"
continue
fi
fi
toggle="true"
while "true"; do
eval local "patterns=($parameter)"
if [[ ${#patterns[@]} -gt 0 ]]; then
for pattern in "${patterns[@]}"; do
[[ i -lt ${#common_messages[@]} ]] || break
if [[ i -lt 0 ]]; then
value="$common_status"
else
value="${common_messages[i]}"
fi
case $compare in
[ne]) [[ ! $value == "$pattern" ]] || break 2;;
[op]) [[ ! $value == $pattern ]] || break 2;;
[tr]) [[ ! $value =~ $pattern ]] || break 2;;
esac
done
fi
if [[ $compare == [not] ]]; then
let "++i,1"
continue 2
else
status="1"
break 2
fi
done
if [[ $compare == [not] ]]; then
status="1"
break
else
let "++i,1"
fi
done
[[ $options == *f* ]] || set +f
return "$status"
}
common.hctaC() {
common_status="0"
}
common.Finally() {
:
}
common.yllaniF() {
[[ common_status -eq 0 ]] || throw
}
caught() {
[[ common_status -eq 0 ]] || return 1
}
EchoExitStatus() {
return "${1:-$?}"
}
EnableThrowOnError() {
[[ $common_options == *e* ]] || common_options+="e"
}
DisableThrowOnError() {
common_options="${common_options/e}"
}
GetStatus() {
echo "$common_status"
}
SetStatus() {
let "common_status = 10#$1"
}
GetMessage() {
echo "${common_messages[$1]}"
}
MessageCount() {
echo "${#common_messages[@]}"
}
CopyMessages() {
if [[ ${#common_messages} -gt 0 ]]; then
eval "$1=(\"\${common_messages[@]}\")"
else
eval "$1=()"
fi
}
common.GetOptions() {
local "opt"
let "OPTIND = 1"
let "OPTERR = 0"
while getopts ":cdeh:ko:u:v:" opt "$@"; do
case $opt in
e) [[ $common_options == *e* ]] || common_options+="e";;
h) common_errHandler="$OPTARG";;
u) common_unhandled="$OPTARG";;
v) common_command="$OPTARG";;
esac
done
shift "$((OPTIND - 1))"
common_fifo="$1"
shift
common_function="$1"
chmod "0600" "$common_fifo"
}
DefaultUnhandled() {
local -i "i"
echo "-------------------------------------------------"
echo "TryCatchFinally: Unhandeled exception occurred"
echo "Status: $(GetStatus)"
echo "Messages:"
for ((i=0; i<$(MessageCount); i++)); do
echo "$(GetMessage "$i")"
done
echo "-------------------------------------------------"
}
TryCatchFinally() {
local "common_errHandler=DefaultErrHandler"
local "common_unhandled=DefaultUnhandled"
local "common_options="
local "common_fifo="
local "common_function="
local "common_flags=$-"
local "common_trySubshell=-1"
local "common_subshell"
local "common_status=0"
local "common_command="
local "common_messages=()"
local "common_handler=$(trap -p ERR)"
[[ -n $common_handler ]] || common_handler="trap ERR"
common.GetOptions "$@"
shift "$((OPTIND + 1))"
[[ -z $common_command ]] || common_command+="=$"
common_command+='("$common_function" "$@")'
set -E
set +e
trap "common.ErrHandler" ERR
try
eval "$common_command"
yrt
catch; do
"$common_unhandled" >&2
hctac
[[ $common_flags == *E* ]] || set +E
[[ $common_flags != *e* ]] || set -e
[[ $common_flags != *f* || $- == *f* ]] || set -f
[[ $common_flags == *f* || $- != *f* ]] || set +f
eval "$common_handler"
}
下面是一个示例，它假设上面的脚本存储在名为simple的文件中。makefifo文件包含这个答案中描述的脚本。假设名为4444kkkkk的文件不存在，因此会发生异常。ls 4444kkkkk命令的错误消息输出将被自动抑制，直到进入适当的捕获块。
#!/bin/bash
#
if [[ $0 != ${BASH_SOURCE[0]} ]]; then
bash "${BASH_SOURCE[0]}" "$@"
return
fi
source simple
source makefifo
MyFunction3() {
echo "entered MyFunction3" >&4
echo "This is from MyFunction3"
ls 4444kkkkk
echo "leaving MyFunction3" >&4
}
MyFunction2() {
echo "entered MyFunction2" >&4
value="$(MyFunction3)"
echo "leaving MyFunction2" >&4
}
MyFunction1() {
echo "entered MyFunction1" >&4
local "flag=false"
try
(
echo "start of try" >&4
MyFunction2
echo "end of try" >&4
)
yrt
catch "[1-3]" "*" "Exception\ Type:\ ERR"; do
echo 'start of catch "[1-3]" "*" "Exception\ Type:\ ERR"'
local -i "i"
echo "-------------------------------------------------"
echo "Status: $(GetStatus)"
echo "Messages:"
for ((i=0; i<$(MessageCount); i++)); do
echo "$(GetMessage "$i")"
done
echo "-------------------------------------------------"
break
echo 'end of catch "[1-3]" "*" "Exception\ Type:\ ERR"'
hctac >&4
catch "1 3 5" "*" -n "Exception\ Type:\ ERR"; do
echo 'start of catch "1 3 5" "*" -n "Exception\ Type:\ ERR"'
echo "-------------------------------------------------"
echo "Status: $(GetStatus)"
[[ $(MessageCount) -le 1 ]] || echo "$(GetMessage "1")"
echo "-------------------------------------------------"
break
echo 'end of catch "1 3 5" "*" -n "Exception\ Type:\ ERR"'
hctac >&4
catch; do
echo 'start of catch' >&4
echo "failure"
flag="true"
echo 'end of catch' >&4
hctac
finally
echo "in finally"
yllanif >&4
"$flag" || echo "success"
echo "leaving MyFunction1" >&4
} 2>&6
ErrHandler() {
echo "EOF"
DefaultErrHandler "$@"
echo "Function: $3"
while read; do
[[ $REPLY != *EOF ]] || break
echo "$REPLY"
done
}
set -u
echo "starting" >&2
MakeFIFO "6"
TryCatchFinally -e -h ErrHandler -o /dev/fd/4 -v result /dev/fd/6 MyFunction1 4>&2
echo "result=$result"
exec >&6-
上面的脚本使用GNU bash, version 3.2.57(1)-release (x86_64-apple-darwin17)进行了测试。运行此脚本的输出如下所示。
starting
entered MyFunction1
start of try
entered MyFunction2
entered MyFunction3
start of catch "[1-3]" "*" "Exception\ Type:\ ERR"
-------------------------------------------------
Status: 1
Messages:
Orginal Status: 1
Exception Type: ERR
Function: MyFunction3
ls: 4444kkkkk: No such file or directory
-------------------------------------------------
start of catch
end of catch
in finally
leaving MyFunction1
result=failure
另一个使用throw的例子可以通过用下面的脚本替换函数MyFunction3来创建。
MyFunction3() {
echo "entered MyFunction3" >&4
echo "This is from MyFunction3"
throw "3" "Orginal Status: 3" "Exception Type: throw"
echo "leaving MyFunction3" >&4
}
throw命令的语法如下所示。如果没有参数，则使用存储在变量中的状态和消息。
throw [status] [message ...]
执行修改后的脚本的输出如下所示。
starting
entered MyFunction1
start of try
entered MyFunction2
entered MyFunction3
start of catch "1 3 5" "*" -n "Exception\ Type:\ ERR"
-------------------------------------------------
Status: 3
Exception Type: throw
-------------------------------------------------
start of catch
end of catch
in finally
leaving MyFunction1
result=failure
正如大家所说，bash没有适当的语言支持的try/catch语法。您可以使用-e参数启动bash，或者在脚本中使用set -e来中止整个bash进程，如果任何命令有非零退出码的话。(你也可以设置+e来临时允许失败的命令。)
因此，模拟try/catch块的一种技术是在启用-e的情况下启动子进程来完成工作。然后在主进程中，检查子进程的返回码。
Bash支持heredoc字符串，因此不需要编写两个单独的文件来处理这个问题。在下面的示例中，TRY heredoc将在单独的bash实例中运行，并启用了-e，因此如果任何命令返回非零退出码，子进程将崩溃。然后，回到主进程，我们可以检查返回代码以处理一个catch块。
#!/bin/bash
set +e
bash -e <<TRY
echo hello
cd /does/not/exist
echo world
TRY
if [ $? -ne 0 ]; then
echo caught exception
fi
它不是一个适当的语言支持的try/catch块，但它可能会为您带来类似的体验。
