我认为有一种方法可以通过Wi-Fi测试开发中的应用程序。这可能吗?

我希望能够解开我的手机,无线开发。


当前回答

2021年8月编辑

谷歌用ArcticFox Beta 03 https://issuetracker.google.com/issues/190411383删除了它,但在Android Studio Bumblebee它仍然存在。看起来他们有很多问题,这就是为什么它只是金丝雀版本

最初的发布

这个Android WiFi ADB插件不能在4.1.1中工作(不再)

但有一个更简单的解决方案: 如果你有Android 11 (api30)设备,你应该使用Android Studio 2020.3.1 (Canary)来连接。非常简单

然后进入开发者设置,扫描二维码。就是这样。 你现在也可以在其他(旧的)Android Studio版本中使用连接设备

其他回答

我在这里找到了答案:

Connect Android device and adb host computer to a common Wi-Fi network accessible to both. We have found that not all access points are suitable; you may need to use an access point whose firewall is configured properly to support adb. Connect the device with USB cable to host. Make sure adb is running in USB mode on host. $ adb usb restarting in USB mode Connect to the device over USB. $ adb devices List of devices attached ######## device Restart host adb in tcpip mode. $ adb tcpip 5555 restarting in TCP mode port: 5555 Find out the IP address of the Android device: Settings -> About tablet -> Status -> IP address. Remember the IP address, of the form #.#.#.#. sometimes its not possible to find the IP-address of the android device, as in my case. so u can get it using adb as the following: $ adb shell netcfg and the should be in the last line of the result. Connect adb host to device: $ adb connect #.#.#.# connected to #.#.#.#:5555 Remove USB cable from device, and confirm you can still access device: $ adb devices List of devices attached #.#.#.#:5555 device

现在可以开始了!

如果adb连接丢失:

确保你的主机仍然连接到你的Android设备所在的Wi-Fi网络。 再次执行“adb connect”步骤重新连接。 或者如果这不起作用,重置你的adb主机: 亚行kill-server

然后从头再来。

拉杜·西米内斯库的回答对我很管用。谢谢你!对于无法看到android设备ip地址的用户,请转到 >无线> Wi-Fi 然后长按已连接的wifi。然后选择“显示高级选项”上的“修改网络配置检查”,并滚动到IP地址部分。

在系统中安装adb后,请运行 Killadd adb和adb start-server 刷新adb。有时我们会遇到这样的问题

如果你使用Android 11多次点击构建版本激活开发人员选项,然后进入设置>高级>开发人员选项。滚动到调试并打开“无线调试”复选框。点击“无线调试”打开调试菜单。选择“配对设备与配对码”,您将看到与配对码配对的地址。在你的桌面终端上写这个命令来与你的Android设备配对。

adb pair 192.168.XXX.XXX:XXXX   <--------- the address showing on screen under paring code

使用配对代码进行连接。 但是等等,我们还没有连接到adb。 在您成功配对您的设备一次之后。您可以在打开无线调试选项的任何时候连接adb。从现在开始,在每次使用adb之前连接它,您不再需要配对地址,而是使用当您进入无线调试菜单时显示的给定地址。

adb connect 192.168.XXX.XXX:XXXX    <--- this address shows inside wireless debug menu

在游戏商店下载应用程序Wifi ADB。非常容易使用,工作就像一个魅力!:)

我通读了每一个答案,发现没有使用android和根的方法。(使用android 11)

1)。使用termux,我安装了android-tools包,这很容易遵循termux的wiki。

2)打开设置->无线调试:并切换无线调试

3.)单击“配对设备与配对码”。

4)。使用设置应用程序和termux启用分屏。在termux中(设置应用程序仍然打开)输入命令adb pair ip:port(这里的端口就是你在上面的分屏中看到的端口)

5.)它会问你一个代码,再次使用你看到的分屏设置应用程序。

6.)在termux中输入命令adb connect ip:port(确保端口是你上面看到的端口,因为它可能与你刚刚输入的端口不同)

整个过程可以自动使用任务器,我不会张贴在这里,因为我发现它快速和容易手动完成,但任务器的创造者有一个指南在这里的某个地方。