如何在IIS Express中启用远程请求?Scott Guthrie写道,这是可能的,但他没有说明如何实现。


当前回答

对于我来说,使用这个相对简单,直接:

通过在扩展对话框中搜索“输送机”下载Visual Studio扩展。然后就安装。

形式: https://marketplace.visualstudio.com/items?itemName=vs-publisher-1448185.ConveyorbyKeyoti

其他回答

如果你尝试过Panic上校的答案,但在Visual Studio中不起作用,试试这个:

在IIS Express配置中附加另一个<binding />

<bindings>
    <binding protocol="http" bindingInformation="*:8080:localhost" />
    <binding protocol="http" bindingInformation="*:8080:hostname" />
</bindings>

最后,你必须以管理员的身份运行Visual Studio

我无法在我的本地网络中为其他用户提供iis请求,我所要做的(除了上面提到的)就是重新启动我的BT Hub路由器。

这是我用Visual Studio 2015为Windows 10启用远程访问所做的,包括http和https:

第一步是将应用程序绑定到内部IP地址。执行cmd -> ipconfig命令获取地址。打开文件/{项目文件夹}/.vs/config/applicationhost。配置并向下滚动,直到你找到像这样的东西:

<site name="Project.Web" id="2">
    <application path="/">
        <virtualDirectory path="/" physicalPath="C:\Project\Project.Web" />
    </application>
    <bindings>
        <binding protocol="http" bindingInformation="*:12345:localhost" />
    </bindings>
</site>

在bindings下添加两个新绑定。如果你喜欢,你也可以使用HTTPS:

<binding protocol="http" bindingInformation="*:12345:192.168.1.15" />
<binding protocol="https" bindingInformation="*:44300:192.168.1.15" />

将以下规则添加到您的防火墙,以admin身份打开一个新的cmd提示符,并运行以下命令:

netsh advfirewall firewall add rule name="IISExpressWeb" dir=in protocol=tcp localport=12345 profile=private remoteip=localsubnet action=allow

netsh advfirewall firewall add rule name="IISExpressWebHttps" dir=in protocol=tcp localport=44300 profile=private remoteip=localsubnet action=allow

现在以管理员身份启动Visual Studio。右键单击web项目项目文件并选择属性。进入“Web”页签,单击“创建虚拟目录”。如果Visual Studio不是以管理员身份运行,则可能会失败。现在一切都正常了。

这是非常棒的,甚至包括HTTPS的漂亮域名:

http://www.hanselman.com/blog/WorkingWithSSLAtDevelopmentTimeIsEasierWithIISExpress.aspx

非常棒的部分,我在其他地方找不到,以防上面的链接消失:

> C:\Program Files (x86)\IIS Express>IisExpressAdminCmd.exe Usage:
> iisexpressadmincmd.exe <command> <parameters> Supported commands:
>       setupFriendlyHostnameUrl -url:<url>
>       deleteFriendlyHostnameUrl -url:<url>
>       setupUrl -url:<url>
>       deleteUrl -url:<url>
>       setupSslUrl -url:<url> -CertHash:<value>
>       setupSslUrl -url:<url> -UseSelfSigned
>       deleteSslUrl -url:<url>
> 
> Examples: 1) Configure "http.sys" and "hosts" file for friendly
> hostname "contoso": iisexpressadmincmd setupFriendlyHostnameUrl
> -url:http://contoso:80/ 2) Remove "http.sys" configuration and "hosts" file entry for the friendly  hostname "contoso": iisexpressadmincmd
> deleteFriendlyHostnameUrl -url:http://contoso:80/

上面的实用程序将为您注册SSL证书!如果你使用-UseSelfSigned选项,这非常简单。

如果你想用困难的方式做事,不明显的部分是你需要告诉HTTP。SYS使用什么证书,像这样:

netsh http add sslcert ipport=0.0.0.0:443 appid={214124cd-d05b-4309-9af9-9caa44b2b74a} certhash=YOURCERTHASHHERE

Certhash是您可以从MMC中的证书属性中获得的“Thumbprint”。

您可以尝试设置端口转发,而不是尝试修改IIS Express配置,添加新的HTTP。sys规则或以管理员身份运行Visual Studio。

基本上,你需要将你的网站运行的IP:PORT转发到你机器上的其他空闲端口,但在外部网络适配器上,而不是localhost。

问题是IIS Express(至少在Windows 10上)绑定到[::1]:port,这意味着它侦听IPv6端口。你需要考虑到这一点。

以下是我如何做到这一点- http://programmingflow.com/2017/02/25/iis-express-on-external-ip.html

希望能有所帮助。