我从一个git repo克隆一个项目,但当我执行pod安装时,我看到的第一行是“设置CocoaPods主repo”,之后我看不到任何更多的东西,控制台停在那里。
我不知道发生了什么。有人知道这里发生了什么吗?CocoaPods为何止步于此?
我从一个git repo克隆一个项目,但当我执行pod安装时,我看到的第一行是“设置CocoaPods主repo”,之后我看不到任何更多的东西,控制台停在那里。
我不知道发生了什么。有人知道这里发生了什么吗?CocoaPods为何止步于此?
当前回答
从cocoapods 1.7.2开始,你可以使用cdn而不是github。它燃烧得很快,挂不起来。从cocopods 1.8.0开始,cdn是默认的。
To use the CDN source in your Podfile: If you don't have private specs: source 'https://cdn.cocoapods.org/' If you have private specs: source 'https://github.com/artsy/Specs.git' - source 'https://github.com/CocoaPods/Specs.git' + source 'https://cdn.cocoapods.org/' Doing this will break your Podfile.lock, so you are likely to need to run pod update to see the changes (be careful, this may update your Pods also). If you have a CI setup, it is recommended to cache the new repo dir as it is very small and would save even more time. With 1.7.2 it should be located at ~/.cocoapods/repos/cocoapods- (yes, with a -), but we're looking to improve the naming in an upcoming release.
更多信息:
CocoaPods 1.7.2 -主Repo CDN完成! CocoaPods 1.8测试版来了!
其他回答
pod setup --verbose
我现在正在运行上面提到的命令,但正如@Joe Blow所提到的,它显示绝对没有关于进度的信息。
但是如果你打开Mac上的活动监视器(Windows上的任务管理器?),在“网络”选项卡下,你会看到一个名为“git-remote-https”的进程,它显示“接收字节”的大小正在增加。在下载了大约300MB后,它停止了,然后我可以在终端窗口中看到进一步的进展。
当你第一次运行它时,Pod安装或Pod安装会获取整个历史记录。你不需要那个提交历史。
pod setup
Ctrl +C
cd ~/.cocoapods/repos
git clone --depth 1 https://github.com/CocoaPods/Specs.git master
在良好的网络连接(4Mbps)下,大约需要2分钟。主目录大约519M大。
从cocoapods 1.7.2开始,你可以使用cdn而不是github。它燃烧得很快,挂不起来。从cocopods 1.8.0开始,cdn是默认的。
To use the CDN source in your Podfile: If you don't have private specs: source 'https://cdn.cocoapods.org/' If you have private specs: source 'https://github.com/artsy/Specs.git' - source 'https://github.com/CocoaPods/Specs.git' + source 'https://cdn.cocoapods.org/' Doing this will break your Podfile.lock, so you are likely to need to run pod update to see the changes (be careful, this may update your Pods also). If you have a CI setup, it is recommended to cache the new repo dir as it is very small and would save even more time. With 1.7.2 it should be located at ~/.cocoapods/repos/cocoapods- (yes, with a -), but we're looking to improve the naming in an upcoming release.
更多信息:
CocoaPods 1.7.2 -主Repo CDN完成! CocoaPods 1.8测试版来了!
我尝试了什么,比克隆回购更快:
舱设置 创建主目录后按Ctrl +C 从https://github.com/CocoaPods/Specs master下载。zip 将内容复制到~/.cocoapods/repos Pod安装-no-repo-update在我的项目文件夹
在那之后,我终于可以看到吊舱正在安装
好运!
编辑:zip大小为144 MB(2017年7月6日)
你可以试着在verbose模式下运行:
pod install --verbose
这将告诉你可可豆荚的作用:
Setting up CocoaPods master repo
Cloning spec repo `master` from `https://github.com/CocoaPods/Specs.git` (branch `master`)
$ /usr/bin/git clone 'https://github.com/CocoaPods/Specs.git' master
Cloning into 'master'...
(如此处所示)
对我来说,上面的步骤花了很长时间,因为回购(2016年12月)现在是1.1 GB