我从一个git repo克隆一个项目,但当我执行pod安装时,我看到的第一行是“设置CocoaPods主repo”,之后我看不到任何更多的东西,控制台停在那里。
我不知道发生了什么。有人知道这里发生了什么吗?CocoaPods为何止步于此?
我从一个git repo克隆一个项目,但当我执行pod安装时,我看到的第一行是“设置CocoaPods主repo”,之后我看不到任何更多的东西,控制台停在那里。
我不知道发生了什么。有人知道这里发生了什么吗?CocoaPods为何止步于此?
当前回答
您将不得不删除回购并重新设置它…
pod repo remove master
pod setup
其他回答
我目前使用的是另一种解决方案。通过更改Podfile中的存储库URL为:
source 'https://cdn.cocoapods.org/'
变化:
- source 'https://github.com/CocoaPods/Specs.git'
+ source 'https://cdn.cocoapods.org/'
从cocoapods 1.7.2开始,你可以使用cdn而不是github。它燃烧得很快,挂不起来。从cocopods 1.8.0开始,cdn是默认的。
To use the CDN source in your Podfile: If you don't have private specs: source 'https://cdn.cocoapods.org/' If you have private specs: source 'https://github.com/artsy/Specs.git' - source 'https://github.com/CocoaPods/Specs.git' + source 'https://cdn.cocoapods.org/' Doing this will break your Podfile.lock, so you are likely to need to run pod update to see the changes (be careful, this may update your Pods also). If you have a CI setup, it is recommended to cache the new repo dir as it is very small and would save even more time. With 1.7.2 it should be located at ~/.cocoapods/repos/cocoapods- (yes, with a -), but we're looking to improve the naming in an upcoming release.
更多信息:
CocoaPods 1.7.2 -主Repo CDN完成! CocoaPods 1.8测试版来了!
pod setup --verbose
我现在正在运行上面提到的命令,但正如@Joe Blow所提到的,它显示绝对没有关于进度的信息。
但是如果你打开Mac上的活动监视器(Windows上的任务管理器?),在“网络”选项卡下,你会看到一个名为“git-remote-https”的进程,它显示“接收字节”的大小正在增加。在下载了大约300MB后,它停止了,然后我可以在终端窗口中看到进一步的进展。
上面的解决方案都不适合我,我不得不卸载coacoapods,然后安装一个特定的版本,然后一切才适合我
sudo gem uninstall cocoapods
然后
sudo gem install cocoapods -v 1.7.5
现在,即使是冗长也显示了进步
$ pod setup --verbose
Setting up CocoaPods master repo
Cloning spec repo `master` from `https://github.com/CocoaPods/Specs.git` (branch `master`)
$ /usr/bin/git clone https://github.com/CocoaPods/Specs.git --progress -- master
Cloning into 'master'...
remote: Enumerating objects: 295, done.
remote: Counting objects: 100% (295/295), done.
remote: Compressing objects: 100% (283/283), done.
Receiving objects: 20% (744493/3722462), 132.93 MiB | 567.00 KiB/s
我也遇到过同样的问题,但是很有效。我在3小时前执行了Pod安装命令,之后它更新了我想要的。 你只需要继续跟踪“活动监视器”,你可以在磁盘选项卡中看到他们的“git远程https”或“git”。它将下载大约330 Mb,然后显示1gb,几分钟后,它将开始安装。无需执行额外命令。
注意:在下载过程中,你的MAC需要连续处于活动模式。如果你的系统进入睡眠模式,那么CPU会停止进程,你会得到一个像手动添加的错误。