的开发者, 我在界面生成器(Xcode 5 / iOS 7)中的自动布局遇到了麻烦。 这是非常基础和重要的,所以我认为每个人都应该知道这是如何正确工作的。如果这是Xcode中的一个bug,那它就是一个严重的bug !

所以,每当我有这样的视图层次结构时,我就会遇到麻烦:

>UIViewController
>> UIView
>>>UIScrollView
>>>>UILabel (or any other comparable UIKit Element)

UIScrollView有固定的约束,例如,每边50px(没问题)。 然后我添加一个顶部空间约束UILabel(没有问题)(我甚至可以钉标签的高度/宽度,改变什么,但应该是不必要的,由于标签的内在大小)

当我给UILabel添加一个尾随约束时,问题就开始了:

例如,尾随空间到:Superview等于:25

现在出现了两个警告——我不明白为什么:

A)滚动内容大小不明确(滚动视图具有不明确的滚动内容高度/宽度)

B)视图错位(Label Expected: x= -67 Actual: x= 207)

我在一个新项目中做了这个最小的例子,你可以下载,我附上了一张截图。如你所见,Interface Builder期望Label位于UIScrollView的边界之外(橙色虚线矩形)。用解决问题工具更新标签的框架,将其移到那里。

请注意:如果你用一个UIView替换UIScrollView,行为是预期的(标签的帧是正确的,根据约束)。所以看起来要么是UIScrollView有问题,要么是我错过了一些重要的东西。

当我运行应用程序而不更新标签的框架时,它的位置很好,正是它应该在的地方,UIScrollView是可滚动的。 如果我确实更新了帧,标签就会从视野中消失,UIScrollView也不会滚动。

帮帮我,欧比王·克诺比!为什么是模棱两可的布局?为什么会出现这种错位的观点?

你可以在这里下载示例项目,试着看看你能弄清楚发生了什么: https://github.com/Wirsing84/AutoLayoutProblem


当前回答

我得到了同样的错误。我已经做了以下工作

视图(父视图) 滚动视图0,0600600 ScrollView中的UIView: 0,0,600,600 UIView包含图像视图,标签

现在为scrollView(2)和UIView(3)添加开头/结尾/顶部/底部。

选择视图(1)和视图(3)设置相同的高度和重量。它解决了我的问题。

我已经做了一个视频,这将会有所帮助:

https://www.youtube.com/watch?v=s-CPN3xZS1A

其他回答

Xcode 11+, Swift 5。

根据@WantToKnow的回答,我解决了我的问题,我准备了视频和代码

你只需要确保有办法使它连续 从滚动视图的顶部到底部的约束行。 (-X-X-X)

在我的例子中——一个水平滚动的滚动视图——我还需要为滚动视图的每个子视图添加宽度和高度限制,尽管苹果的技术说明没有告诉你这一点。

我知道我可能晚了,但是下一个解决方案无需额外的代码就解决了这类问题,只是使用故事板:

对于你的内容视图,你需要设置前/后/上/下空格到滚动视图的约束,这不会改变内容视图框架,如下所示:

当然,您需要为内容视图创建额外的约束,以便滚动视图可以知道内容大小。例如,设置固定高度和中心x。

希望这能有所帮助。

Xcode 11 +。

使用自动布局的最简单方法:

Add UIScrollView and pin it 0,0,0,0 to superview (or your desired size) Add container of UIView type inside ScrollView, pin it 0,0,0,0 to all 4 sides and center it horizontally and vertically. In size inspector of container, change bottom and align center Y priority to 250. (for horizontal scroll change trailing and align center X) Add all views that you need into said container (UIView). Don't forget to set the bottom constraint on the lowest view. Select the UIScrollView, select the size inspector and deselect Content Layout Guides.

This error took me a while to track down, initially I tried pinning the ScrollView's size but the error message clearly says "content size". I made sure everything I pinned from the top of the ScrollView was also pinned to the bottom. That way the ScrollView can calculate its content height by finding the height of all the objects & constraints. This solved the ambiguous content height, the width is pretty similar... Initially I had most things X centered in the ScrollView, but I had to also pin the objects to the side of the ScrollView. I don't like this because the iPhone6 might have a wider screen but it will remove the 'ambiguous content width' error.