我刚刚重新安装XAMPP,当我试图在XAMPP控制面板中启动我的Apache服务器时,我现在得到以下错误:

16:50:25  [Apache]     Status change detected: running
16:50:26  [Apache]     Status change detected: stopped
16:50:26  [Apache]     Error: Apache shutdown unexpectedly.
16:50:26  [Apache]     This may be due to a blocked port, missing dependencies,
16:50:26  [Apache]     improper privileges, a crash, or a shutdown by another method.
16:50:26  [Apache]     Press the Logs button to view error logs and check
16:50:26  [Apache]     the Windows Event Viewer for more clues
16:50:26  [Apache]     If you need more help, copy and post this
16:50:26  [Apache]     entire log window on the forums

我怎么解决这个问题?


当前回答

按照这个方法立即解决!

这是来要么它没有访问启动一个服务监听端口

Soln:使用管理员权限

这是因为系统上已经运行了一个端口80,443

Soln:使用netstat -ano |查找“0.0.0.0:443”,然后使用taskkill /pid ENTER_PROCESS_ID /F关闭并重启Apache

搜索正在运行的后台服务,你不需要的可能是mongo,节点服务器等,关闭它们 如果没有工作,打开httpd.conf和httpd-ssl.conf文件,将443替换为4431,将80替换为8080 没有任何工作可能是由于与文件相关的问题,所以再次安装XAMPP在一个没有空间C:\XAMPP的位置

解决! ! ! !

其他回答

遵循以下步骤:

Open your XAMPP control panel then click its "Config" Choose the "Apache (httpd.conf)" and find this code below and change it into this one: #Change this to Listen on specific IP addresses as shown below #to prevent Apache from glomming onto all bound IP addresses. #Listen 0.0.0.0:80 #Listen [::]:80 Listen 80 # Dynamic Shared Object (DSO) Support Save it (Ctrl + S) After that, go back to the XAMPP control panel and click its config again. Choose "Apache (httpd-ssl.conf)", find this code below, and change it again: # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # #Listen 0.0.0.0:443 #Listen [::]:443 Listen 443 Save it (Ctrl + S) Then, click the "config" (note: above the netstat) and click the "service and port settings". Change "Main Port" to 8080 and "SSL Port" to 4433, then save it. Finally, go to the "control panel" -> "Programs & Features" -> "Turn Windows On or Off". Uncheck your "Internet Information Services", and then click OK.

只需等待它,您的计算机/笔记本电脑将自动重新启动,并尝试再次打开XAMPP控制面板,然后启动Apache。

你可以采用上面提到的解决方案。这个问题可以通过修改你的“httpd.conf”(C:\xampp\apache\conf\httpd.conf)文件和“httpd-ssl.conf”(C:\xampp\apache\conf\extra\httpd-ssl.conf)文件来解决。 如果问题仍然存在,你可以检查你的skype端口。

But in my case this was different. I had to make changes in "server.crt"(C:\xampp\apache\conf\ssl.crt\server.crt) file.Try running your xammp apache from the command line in administration mode. "C:\xampp\apache\bin\httpd.exe" This will give you the errors -in which file and -which line. Likewise, I had an error in server.crt file which was blank. If you have xammp running in any other system, just copy the contents of this file(C:\xampp\apache\conf\ssl.crt\server.crt) and paste in your server.crt file and You are Done!

感谢和问候 阿卡纳

我以前也遇到过同样的问题。我有一台旧笔记本电脑,上面几乎所有的端口不是被阻塞就是故障了。我是这么做的。

打开XAMPP控制面板。 点击Config 然后进入Apache httpd.conf文件。用文本编辑器打开它。 搜索“80”(按Ctrl + F并找到所有它们。将其替换为8080或4040或4000)。 保存文件。并重新启动XAMPP。

它对我很有效,我希望它也能帮助到你。

我试了所有的办法,但我的问题还是没有解决。事实证明,在安装Visual Studio 2019之后,我的c++可重分发文件发生了很多变化。

我实际上在跑步

test_php.bat

它告诉了我错误是什么

C:\Windows\SYSTEM32\VCRUNTIME140.dll' 14.0与此PHP构建不兼容,该PHP构建在未知的第0行中链接到14.28

因此,我开始了:

微软Visual Studio网站->其他工具,框架,和 > Microsoft Visual c++ Redistributable for Visual Studio 2019

和下载。安装文件并重新启动我的电脑后,问题就解决了。Apache现在可以正常运行了

您可以做的一件事是通过发出命令停止端口80上的服务

net stop http

在cmd中。系统将询问您是否确定要停止这些服务。我发现我有一些服务我没有使用,并关闭了它们。

要查看还有谁正在使用端口80,请键入cmd

netstat -abno

我假设您希望在端口80上运行Apache。如果是这种情况,并且希望保留冲突的服务,则需要将它们关联到一个新的端口。

如果问题不是端口繁忙,您也可以尝试以下方法:在XAMPP配置面板中选择“显示调试信息”。当启动Apache时,会显示类似“正在执行”c:\xampp\ Apache \bin\httpd.exe”的内容。如果你运行它

c:\xampp\apache\bin\httpd.exe

在cmd中,你会得到更多的信息(我曾经有一些问题与我的httpd.conf文件)。

相关:如何释放我的端口80在本地主机Windows?Apache不能在xampp中运行