我刚刚重新安装XAMPP,当我试图在XAMPP控制面板中启动我的Apache服务器时,我现在得到以下错误:

16:50:25  [Apache]     Status change detected: running
16:50:26  [Apache]     Status change detected: stopped
16:50:26  [Apache]     Error: Apache shutdown unexpectedly.
16:50:26  [Apache]     This may be due to a blocked port, missing dependencies,
16:50:26  [Apache]     improper privileges, a crash, or a shutdown by another method.
16:50:26  [Apache]     Press the Logs button to view error logs and check
16:50:26  [Apache]     the Windows Event Viewer for more clues
16:50:26  [Apache]     If you need more help, copy and post this
16:50:26  [Apache]     entire log window on the forums

我怎么解决这个问题?


当前回答

我的例子很简单。

我在我的以太网端口上设置了一个本地IP地址。

然后出现这个错误。结果我并没有连接 将电缆连接到它,因此IP不会解析为Apache中的IP集。

解决方案是将电缆连接到交换机或路由器。然后可以启动Apache。

其他回答

遵循以下步骤:

Open your XAMPP control panel then click its "Config" Choose the "Apache (httpd.conf)" and find this code below and change it into this one: #Change this to Listen on specific IP addresses as shown below #to prevent Apache from glomming onto all bound IP addresses. #Listen 0.0.0.0:80 #Listen [::]:80 Listen 80 # Dynamic Shared Object (DSO) Support Save it (Ctrl + S) After that, go back to the XAMPP control panel and click its config again. Choose "Apache (httpd-ssl.conf)", find this code below, and change it again: # Note: Configurations that use IPv6 but not IPv4-mapped addresses need two # Listen directives: "Listen [::]:443" and "Listen 0.0.0.0:443" # #Listen 0.0.0.0:443 #Listen [::]:443 Listen 443 Save it (Ctrl + S) Then, click the "config" (note: above the netstat) and click the "service and port settings". Change "Main Port" to 8080 and "SSL Port" to 4433, then save it. Finally, go to the "control panel" -> "Programs & Features" -> "Turn Windows On or Off". Uncheck your "Internet Information Services", and then click OK.

只需等待它,您的计算机/笔记本电脑将自动重新启动,并尝试再次打开XAMPP控制面板,然后启动Apache。

在XAMPP控制面板V3.2.1中,单击右上角的“NetStat”按钮。确保端口80没有被任何其他程序使用。然后点击它下面的“Shell”。在shell提示符中发出这个命令;

Apache_Start.bat

或者输入“ap”,然后按tab键两次,这将类似地生成上述命令。 您将看到Apache失败的确切错误。这很可能是虚拟主机配置问题或其他问题。它将显示发生错误的行号。只需要修复这个错误。注意,在RootDocument中,尾随的\也可能是错误的来源。删除任何拖尾""。

我遇到了同样的问题,结果是我忘记运行setup_xampp.bat(可移植版本)。

有时问题不是端口问题,但可能是由于您所做的错误配置,Apache没有在Windows的事件查看器中记录错误。简单地说

cd C:\xampp\apache\bin

然后运行

httpd.exe

Apache会为你吐出错误,如下所示

AH00526: Syntax error on line 2 of C:/xampp/apache/conf/httpd.conf: Invalid command 'This', perhaps misspelled or defined by a module not included in the server configuration

我希望这能帮助一些可怜的人:)

对我有用的技巧是,

以管理员身份启动XAMPP

我尝试使用httpd更改端口。Config和httpd-ssl.config。它结束了我把它保存在。txt文件。也在右边顶部使用配置。没有工作

我正在使用VMworkstation。