有一个程序叫做GlovePIE。您可以用一种简单的脚本语言对它进行编程，而且我相信它支持MIDI。我不确定这是否符合“Java”的范畴，但它仍然是一个伟大的程序。我用它来控制使用PS3控制器的机器人。它非常强大。

考虑在硬件上模拟usb(或ps/2?)键盘。您将不再依赖于特定的操作系统或特定的操作系统API。硬件解决方案将经受住时间的考验。当其他人都在使用Windows 11时，不要在Windows 7中使用旧的API !Arduino很容易学。

Arduino MIDI硬件是现成的 Arduinos已被用于模拟键盘设备

有很多关于Arduino的信息和帮助。这是一个为新手打造的硬件黑客平台。现在谷歌正在推广Arduino，它只会变得更大。

编辑:虚拟USB键盘软件和硬件

您可以在MIDI DotNet中使用。net中的源代码示例访问硬件。

创建MIDI notes数据流的完整工作示例是在VB 5/6-Tipp 0521中:MIDI-Töne erzeugen (Visual Basic 6.0，某处是.NET版本)

一种模拟键盘敲击的方法是在VB 5/6-Tipp 0155: Tastaturereignisse simulieren (Visual Basic 6.0，某处是.NET版本)

和识别击键在tip - upload: VB中有描述。NET 0266: Globaler KeyHook。

然后，为钢琴演奏者使用一个良好的工作矩阵

在钢琴上，如果你是一个优秀的演奏者，你可以有10个手指在键盘上，如果矩阵是可用的，我认为你可以比任何电脑键盘用户更快。: -)

在这种情况下，如果我没有理解错你的问题，这应该不是什么大事。

如果你使用Linux，可以去Footware看看。

它应该正是你所寻找的-如果你调整MIDI音高到你喜欢的键映射…

我从没想过这对除了我以外的任何人都有用;

我已经很多年没有做过任何MIDI编程了，但是你的基本想法非常合理(没有双关语)。

MIDI是一连串的“事件”(或“信息”)，其中最基本的两个是“开启”和“关闭”，它们都带有音符号(0 = C中C低5个八度，到127 = G中C以上G高5个八度，为半音)。这些事件在速度敏感(“触摸敏感”)的键盘上携带一个“速度”数字，其力度(你猜对了)在0到127之间。

Between velocity, chording, and the pedals, I'd think you could come up with quite a good "typing" interface for the piano keyboard. Chording in particular could be a very powerful technique — as I mentioned in the comments, it's why rank-and-file stenographers can use a stenotype machine to keep up with people talking for hours in a row, when even top-flight typists wouldn't be able to for any length of time via normal typewriter-style keyboards. As with machine stenography, you'd need a "dictionary" of the meanings of chords and sequences of chords. (Can you tell I used to work in the software side of machine stenography?)

要做到这一点，基本的部分是:

接收MIDI输入。不要尝试自己去做，使用一个库。编辑:显然，Java Sound API支持MIDI，包括从MIDI控制器接收事件。酷。本页也可能有用。 将数据转换为你想要发送的击键，例如通过我上面提到的字典。 输出击键到计算机。

为了最广泛地与软件兼容，您必须将其作为键盘设备驱动程序编写。这是操作系统的一个插件，用作键盘事件的源，与底层硬件(在您的例子中是钢琴键盘)通信。对于Windows和Linux，你可能会想要使用C语言。

However, since you're just generating keystrokes (not trying to intercept them, which I was trying to do years ago), you may be able to use whatever features the operating system has for sending artificial keystrokes. Windows has an interface for doing that (probably several, the one I'm thinking of is SendInput but I know there's some "journal" interface that does something similar), and I'm sure other operating systems do as well. That may well be sufficient for your purposes — it's where I'd start, because the device driver route is going to be awkward and you'd probably have to use a different language for it than Java. (I'm a big fan of Java, but the interfaces that operating systems use to talk to device drivers tend to be more easily consumed via C and similar.)

更新:更多关于和弦到按键的“字典”:

基本上，字典是一个trie(谢谢，@Adam)，我们用最长前缀匹配进行搜索。细节:

In machine stenography, the stenographer writes by pressing multiple keys on the stenotype machine at the same time, then releasing them all. They call this a "stroke" of the keyboard; it's like playing a chord on the piano. Strokes frequently (but not always) correspond to a syllable of spoken language. Like syllables, sometimes one stroke (chord) has meaning all on its own, other times it only has meaning combined with following strokes. (Think "good" vs. "good" followed by "bye"). Although they'll be heavily influenced by the school at which they studied, each stenographer will have their own "dictionary" of what strokes they use to mean what, a dictionary they will continuously hone over the course of their working lives. The dictionary will have entries where the stenographic part ("steno", for short) is one stroke long, or multiple strokes long. Frequently, there will be several entries with the same starting stroke which are differentiated by their length and by the subsequent strokes. For instance (and I won't use real steno here, just placeholders), there may be these entries:

A     = alpha
A/B   = alphabet
A/B/C = alphabetic
A/C   = air conditioning
B     = bee
B/C   = because
C     = sea
D     = dog
D/D   = Dee Dee

(这些字母并不是音符，只是抽象的标记。)

请注意，A开始多个条目，还要注意如何转换C笔画取决于您之前是否看过A、B，或者您正在从头开始。

Also note that (although not shown in the very small sample above), there may be multiple ways to "play" the same word or phrase, rather than just one. Stenographers do that to make it easier to flow from a preceding word to the next depending on hand position. There's an obvious analogy to music there, and you could use that to make your typing flow more akin to playing music, in order to both prevent this from negatively affecting your piano playing and to maximize the likelihood of this actually helping with the RSI.

When translating steno into standard text, again we use a "longest-prefix match" search: The translation algorithm starts with the first stroke ever written, and looks for entries starting with that stroke. If there is only one entry, and it's one stroke long, then we can reliably say "that's the entry to use", output the corresponding text, and then start fresh with the next stroke. But more likely, that stroke starts multiple entries of varying lengths. So we look at the next stroke and see if there are entries that start with those two strokes in order; and so on until we get a match.

根据上面的字典，假设我们看到了这个序列:

A C B B C A B C A B D

我们是这样翻译的:

A is the start of three entries of varying lengths; look at next stroke: C A/C matches only one entry; output "air conditioning" and start fresh with next stroke: B B starts two entries; look at next stroke: B B/B doesn't start anything; take the longest previous match (B) and output that ("bee") Having output B = "bee", we still have a B stroke in our buffer. It starts two entries, so look at the next stroke: C B/C matches one entry; output "because" and start fresh with the next stroke: A A starts three entries; look at the next stroke: B A/B starts two entries; look at the next stroke: C A/B/C only matches one entry; output "alphabetic" and start fresh with the next stroke: A A starts three entries; look at next stroke: B A/B starts two entries; look at next stroke: D A/B/D doesn't match anything, so take the longest previous match (A/B) and use it to output "alphabet". That leaves us with D still in the buffer. D starts two entries, so we would normally look at the next stroke — but we've processed all the strokes, so consider it in isolation. In isolation, it translates as "dog" so output that.

以上各方面要注意:

You have a buffer of strokes you've read but haven't translated yet. You always want to match the most strokes against a single entry that you can. A/B should be translated as "alphabet", not "alpha" and "bee". (Not shown above) You may well have sequences of strokes that you can't translate, because they don't match anything in the dictionary. (Steno people use the noun "untranslate" -- e.g., with our dictionary, the strokes E would be an "untranslate".) (Not shown above) Some theories of steno allow the same set of strokes to mean more than one thing, based on a broader context. Steno people call these "conflicts". You probably want to disallow them in your project, and in fact when steno used to be translated manually by the stenographer, conflicts were fine because they'd know just by where in the sentence they were what the right choice was, but with the rise of machine translation, conflict-free theories of steno arose specifically to avoid having to go through the resulting translated text and "fix" conflicts. Translating in real time (which you'd be doing) means that if you receive a partial match, you'll want to hold onto it while waiting for the next chord — but probably only up to a timeout, at which point you'd translate what you have in the buffer as best you can. (Or maybe you don't want a timeout; it's your call.) Probably best to have a stroke that says "disregard the previous stroke" Probably best to have a stroke that says "completely clear the buffer without outputting anything"

许多键盘都有一个串行端口(RS-232)连接器，向计算机发送MIDI信号。我使用一个名为“梁”的程序将串口通信转换为键盘敲击。

“梁”有一个“映射”功能，允许您将每个键一个接一个地映射到相应的击键。

这可能是你正在寻找的简单解决方案!