Bechir Bejaoui在他的文章中揭露了WPF中RelativeSources的用例:

The RelativeSource is a markup extension that is used in particular binding cases when we try to bind a property of a given object to another property of the object itself, when we try to bind a property of a object to another one of its relative parents, when binding a dependency property value to a piece of XAML in case of custom control development and finally in case of using a differential of a series of a bound data. All of those situations are expressed as relative source modes. I will expose all of those cases one by one. Mode Self: Imagine this case, a rectangle that we want that its height is always equal to its width, a square let's say. We can do this using the element name <Rectangle Fill="Red" Name="rectangle" Height="100" Stroke="Black" Canvas.Top="100" Canvas.Left="100" Width="{Binding ElementName=rectangle, Path=Height}"/> But in this above case we are obliged to indicate the name of the binding object, namely the rectangle. We can reach the same purpose differently using the RelativeSource <Rectangle Fill="Red" Height="100" Stroke="Black" Width="{Binding RelativeSource={RelativeSource Self}, Path=Height}"/> For that case we are not obliged to mention the name of the binding object and the Width will be always equal to the Height whenever the height is changed. If you want to parameter the Width to be the half of the height then you can do this by adding a converter to the Binding markup extension. Let's imagine another case now: <TextBlock Width="{Binding RelativeSource={RelativeSource Self}, Path=Parent.ActualWidth}"/> The above case is used to tie a given property of a given element to one of its direct parent ones as this element holds a property that is called Parent. This leads us to another relative source mode which is the FindAncestor one. Mode FindAncestor In this case, a property of a given element will be tied to one of its parents, Of Corse. The main difference with the above case is the fact that, it's up to you to determine the ancestor type and the ancestor rank in the hierarchy to tie the property. By the way try to play with this piece of XAML <Canvas Name="Parent0"> <Border Name="Parent1" Width="{Binding RelativeSource={RelativeSource Self}, Path=Parent.ActualWidth}" Height="{Binding RelativeSource={RelativeSource Self}, Path=Parent.ActualHeight}"> <Canvas Name="Parent2"> <Border Name="Parent3" Width="{Binding RelativeSource={RelativeSource Self}, Path=Parent.ActualWidth}" Height="{Binding RelativeSource={RelativeSource Self}, Path=Parent.ActualHeight}"> <Canvas Name="Parent4"> <TextBlock FontSize="16" Margin="5" Text="Display the name of the ancestor"/> <TextBlock FontSize="16" Margin="50" Text="{Binding RelativeSource={RelativeSource FindAncestor, AncestorType={x:Type Border}, AncestorLevel=2},Path=Name}" Width="200"/> </Canvas> </Border> </Canvas> </Border> </Canvas> The above situation is of two TextBlock elements those are embedded within a series of borders and canvas elements those represent their hierarchical parents. The second TextBlock will display the name of the given parent at the relative source level. So try to change AncestorLevel=2 to AncestorLevel=1 and see what happens. Then try to change the type of the ancestor from AncestorType=Border to AncestorType=Canvas and see what's happens. The displayed text will change according to the Ancestor type and level. Then what's happen if the ancestor level is not suitable to the ancestor type? This is a good question, I know that you're about to ask it. The response is no exceptions will be thrown and nothings will be displayed at the TextBlock level. TemplatedParent This mode enables tie a given ControlTemplate property to a property of the control that the ControlTemplate is applied to. To well understand the issue here is an example bellow <Window.Resources> <ControlTemplate x:Key="template"> <Canvas> <Canvas.RenderTransform> <RotateTransform Angle="20"/> </Canvas.RenderTransform> <Ellipse Height="100" Width="150" Fill="{Binding RelativeSource={RelativeSource TemplatedParent}, Path=Background}"> </Ellipse> <ContentPresenter Margin="35" Content="{Binding RelativeSource={RelativeSource TemplatedParent},Path=Content}"/> </Canvas> </ControlTemplate> </Window.Resources> <Canvas Name="Parent0"> <Button Margin="50" Template="{StaticResource template}" Height="0" Canvas.Left="0" Canvas.Top="0" Width="0"> <TextBlock FontSize="22">Click me</TextBlock> </Button> </Canvas> If I want to apply the properties of a given control to its control template then I can use the TemplatedParent mode. There is also a similar one to this markup extension which is the TemplateBinding which is a kind of short hand of the first one, but the TemplateBinding is evaluated at compile time at the contrast of the TemplatedParent which is evaluated just after the first run time. As you can remark in the bellow figure, the background and the content are applied from within the button to the control template.

一些有用的小片段:

以下是如何主要在代码中做到这一点:

Binding b = new Binding();
b.RelativeSource = new RelativeSource(RelativeSourceMode.FindAncestor, this.GetType(), 1);
b.Path = new PropertyPath("MyElementThatNeedsBinding");
MyLabel.SetBinding(ContentProperty, b);

我很大程度上复制了这从绑定相对源在代码后面。

同样，就示例而言，MSDN页面也很不错:RelativeSource Class

下面是MVVM架构的一个更直观的解释:

我没有阅读每个答案，但我只是想添加这个信息，以防按钮的相对源命令绑定。

当你使用Mode= find祖宗的相对源时，绑定必须像这样:

Command="{Binding Path=DataContext.CommandProperty, RelativeSource={...}}"

如果你没有在你的路径中添加DataContext，在执行时它不能检索属性。

我创建了一个库来简化WPF的绑定语法，包括让它更容易使用RelativeSource。这里有一些例子。之前:

{Binding Path=PathToProperty, RelativeSource={RelativeSource Self}}
{Binding Path=PathToProperty, RelativeSource={RelativeSource AncestorType={x:Type typeOfAncestor}}}
{Binding Path=PathToProperty, RelativeSource={RelativeSource TemplatedParent}}
{Binding Path=Text, ElementName=MyTextBox}

后:

{BindTo PathToProperty}
{BindTo Ancestor.typeOfAncestor.PathToProperty}
{BindTo Template.PathToProperty}
{BindTo #MyTextBox.Text}

下面是一个如何简化方法绑定的示例。之前:

// C# code
private ICommand _saveCommand;
public ICommand SaveCommand {
 get {
  if (_saveCommand == null) {
   _saveCommand = new RelayCommand(x => this.SaveObject());
  }
  return _saveCommand;
 }
}

private void SaveObject() {
 // do something
}

// XAML
{Binding Path=SaveCommand}

后:

// C# code
private void SaveObject() {
 // do something
}

// XAML
{BindTo SaveObject()}

你可以在这里找到图书馆:http://www.simplygoodcode.com/2012/08/simpler-wpf-binding.html

请注意，在我用于方法绑定的“BEFORE”示例中，代码已经通过使用RelayCommand进行了优化，我最后检查它不是WPF的本机部分。没有这个BEFORE的例子会更长。

如果你想绑定到对象上的另一个属性:

{Binding Path=PathToProperty, RelativeSource={RelativeSource Self}}

如果你想获取一个祖先的属性:

{Binding Path=PathToProperty,
    RelativeSource={RelativeSource AncestorType={x:Type typeOfAncestor}}}

如果你想在父模板上获得一个属性(所以你可以在一个ControlTemplate中做2种方式绑定)

{Binding Path=PathToProperty, RelativeSource={RelativeSource TemplatedParent}}

或者更短(这只适用于OneWay绑定):

{TemplateBinding Path=PathToProperty}