我正在尝试在我全新的Nexus 10上安装一个Android应用程序。我有一个。apk文件。我下载了Android SDK，安装了“Android SDK Tools”，“Android SDK Platform-tools”和谷歌USB Driver。我已经在我的Nexus 10上检查了“未知来源”的设置。
当我从命令终端运行“adb devices”时，它不会列出任何设备。我试图遵循这个建议，因为它与我之前在Stack Overflow上找到的建议完全相同。在执行这些步骤之后，“adb devices”仍然返回一个空列表，更糟糕的是，当我将Nexus 10连接到我的PC时，Windows不会显示设备内的任何文件夹。
我已经取消了该链接中的步骤，以及迄今为止我所做的所有其他操作，还从设备管理器中卸载了我的Nexus 10并重新安装了它，但我仍然没有在设备中看到任何文件夹。
为了让我的设备显示在ADB设备中，我是否遗漏了什么?
我怎么做才能让Windows看到设备内的文件夹?
当前回答
使用另一根电缆。
刚刚发现我的一根常规充电线有Vcc、Gnd对，但没有Data+、Data-。
https://en.wikipedia.org/wiki/USB#Pinouts
其他回答
你最近更新了安卓系统吗?我更新到棒棒糖，突然间我没有了adb设备。嘘!我花了一段时间尝试了几件事，但都无济于事。然后我进入我的开发人员选项，你瞧，“USB调试”被关闭了。愚蠢的谷歌。在把它重新打开后，它立即显示出来，我又开始工作了!
Windows 8无法识别我的Nexus 10设备。通过设备上的设置对话框设置传输模式为摄像机(PTP)修正。
>存储>菜单> USB计算机连接到“相机(PTP)”
我找到了解决我的问题的办法。
进入工具->布局检查器。 按几次重启按钮。
我不知道它是如何与ADB连接的，但它是有效的。
对于Windows，只要结束所有与Blue堆栈相关的进程或任何类似的模拟器(如果您正在使用)。
为我工作。
For the Blu Studio 5.5s ADB drivers, you have to go through this hoop. I am certain it is the same with all Blu phones or maybe for all non-Google mfg phones, I am not sure. First of all if you connect the Blu device with USB cable and USB Debuggin off, you will see that Windows 7 loads a generic driver for you to copy on/off files to the phone and SD storage. This will appear when the USB cable is first plugged in and appears as a device icon under Control Panel, Device Manager, Portable Devices, BLU STUDIO 5.5 S (or the device you are working with). Do not bother getting the hardware ID yet - just observe that this happens (which indicates you are good so far and don't have a bad cable or something).
Go to the phone and switch on USB Debugging in the Developer section of your phone. Notice that an additional item appears as an undefined device now in the device manager list, it will have the yellow exclamation mark and it may have the same name of the phone listed as you saw under Portable Devices. Ignore this item for the moment. Now, without doing anything to the phone (it should be already in USB debug mode) go back to the Portable Devices in Device Manager and right-click the BLU STUDIO 5.5 S or whatever phone you are working with that is listed there without the exclamation mark (listed under Portable Devices). Right click on the icon under Portable Devices, in this example the name that appears is BLU STUDIO 5.5 S. On that icon select Properties, Details, and under the pull down, select Hardware IDs and copy down what you see.
对于BLU STUDIO 5.5 S，我得到:
USB\VID_0BB4&PID_0C02&REV_0216&MI_00
USB\VID_0BB4&PID_0C02&MI_00
(注意，如果你不按顺序这样做，HW ID将与手机USB调试关闭时不同。你想复制的值，它改变时，USB调试是ON)
现在按照上面的说明进行操作，当然要定制添加INF文件的行，使用与您自己的手机相关的行，而不是与Nexus 10相关的行。下面是要定制的内容;当你下载SDK时，你应该有一个从ZIP扩展而来的文件结构，如下所示:
\adt-bundle-windows-x86_64-20140321\sdk\extras\google\usb_driver
找到名为android_winusb的文件。usb_driver文件夹中的Inf 复制它并命名为任何名称，比如myname.inf 编辑myname。Inf和添加行如上所述，只修改为您的特定电话。例如，对于BLU STUDIO 5.5 S，我根据提示在2个位置添加了以下2行。
;BLU STUDIO 5.5 S
%SingleAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&REV_0216&MI_00
%CompositeAdbInterface% = USB_Install, USB\VID_0BB4&PID_0C02&MI_00
请注意，您将这些行添加到32位和64位部分中，以与教程中的示例相匹配。
Now go back up to the unknown device that appeared in Device Manager when you switched on device USB debugging and right click on this item (has yellow exclamation mark), right click on it and then select Update Driver Software, and then Browse My Computer, Let Me Pick, click on the Have Disk button and browse to find the myname.inf. Continue to agree to all the prompts warning you it might not be the right driver. As the final step, Windows should have identified the device as Android ADB Interface and once that is done, you should be able to go back, open your CMD window and run the command "adb devices" as instructed in this tutorial and now you should see that the phone is now discovered and communicating.
现在您可以开始使用adb命令了。
