我使用了一个答案，从创建重复字符字符串在shell脚本字符重复。我有两个相对较小的bash版本，用于需要显示进度条的脚本(例如，一个遍历许多文件的循环，但对大的tar文件或复制操作没有用处)。较快的一个由两个函数组成，一个是为条形显示准备字符串:

preparebar() {
# $1 - bar length
# $2 - bar char
    barlen=$1
    barspaces=$(printf "%*s" "$1")
    barchars=$(printf "%*s" "$1" | tr ' ' "$2")
}

一个用来显示进度条:

progressbar() {
# $1 - number (-1 for clearing the bar)
# $2 - max number
    if [ $1 -eq -1 ]; then
        printf "\r  $barspaces\r"
    else
        barch=$(($1*barlen/$2))
        barsp=$((barlen-barch))
        printf "\r[%.${barch}s%.${barsp}s]\r" "$barchars" "$barspaces"
    fi
}

它可以被用作:

preparebar 50 "#"

这意味着为bar准备50个“#”字符的字符串，在那之后:

progressbar 35 80

将显示“#”字符的数量，对应35/80的比例:

[#####################                             ]

请注意，该函数在同一行上反复显示条，直到您(或其他程序)打印换行符。如果你把-1作为第一个参数，条形图将被删除:

progressbar -1 80

较慢的版本都在一个函数中:

progressbar() {
# $1 - number
# $2 - max number
# $3 - number of '#' characters
    if [ $1 -eq -1 ]; then
        printf "\r  %*s\r" "$3"
    else
        i=$(($1*$3/$2))
        j=$(($3-i))
        printf "\r[%*s" "$i" | tr ' ' '#'
        printf "%*s]\r" "$j"
    fi
}

它可以被用作(和上面的例子一样):

progressbar 35 80 50

如果你需要stderr上的进度条，只需在每个printf命令的末尾添加>&2。

我使用了一个答案，从创建重复字符字符串在shell脚本字符重复。我有两个相对较小的bash版本，用于需要显示进度条的脚本(例如，一个遍历许多文件的循环，但对大的tar文件或复制操作没有用处)。较快的一个由两个函数组成，一个是为条形显示准备字符串:

preparebar() {
# $1 - bar length
# $2 - bar char
    barlen=$1
    barspaces=$(printf "%*s" "$1")
    barchars=$(printf "%*s" "$1" | tr ' ' "$2")
}

一个用来显示进度条:

progressbar() {
# $1 - number (-1 for clearing the bar)
# $2 - max number
    if [ $1 -eq -1 ]; then
        printf "\r  $barspaces\r"
    else
        barch=$(($1*barlen/$2))
        barsp=$((barlen-barch))
        printf "\r[%.${barch}s%.${barsp}s]\r" "$barchars" "$barspaces"
    fi
}

它可以被用作:

preparebar 50 "#"

这意味着为bar准备50个“#”字符的字符串，在那之后:

progressbar 35 80

将显示“#”字符的数量，对应35/80的比例:

[#####################                             ]

请注意，该函数在同一行上反复显示条，直到您(或其他程序)打印换行符。如果你把-1作为第一个参数，条形图将被删除:

progressbar -1 80

较慢的版本都在一个函数中:

progressbar() {
# $1 - number
# $2 - max number
# $3 - number of '#' characters
    if [ $1 -eq -1 ]; then
        printf "\r  %*s\r" "$3"
    else
        i=$(($1*$3/$2))
        j=$(($3-i))
        printf "\r[%*s" "$i" | tr ' ' '#'
        printf "%*s]\r" "$j"
    fi
}

它可以被用作(和上面的例子一样):

progressbar 35 80 50

如果你需要stderr上的进度条，只需在每个printf命令的末尾添加>&2。

根据上面列出的建议，我决定实现自己的进度条。

#!/usr/bin/env bash

main() {
  for (( i = 0; i <= 100; i=$i + 1)); do
    progress_bar "$i"
    sleep 0.1;
  done
  progress_bar "done"
  exit 0
}

progress_bar() {
  if [ "$1" == "done" ]; then
    spinner="X"
    percent_done="100"
    progress_message="Done!"
    new_line="\n"
  else
    spinner='/-\|'
    percent_done="${1:-0}"
    progress_message="$percent_done %"
  fi

  percent_none="$(( 100 - $percent_done ))"
  [ "$percent_done" -gt 0 ] && local done_bar="$(printf '#%.0s' $(seq -s ' ' 1 $percent_done))"
  [ "$percent_none" -gt 0 ] && local none_bar="$(printf '~%.0s' $(seq -s ' ' 1 $percent_none))"

  # print the progress bar to the screen
  printf "\r Progress: [%s%s] %s %s${new_line}" \
    "$done_bar" \
    "$none_bar" \
    "${spinner:x++%${#spinner}:1}" \
    "$progress_message"
}

main "$@"

使用Linux命令pv。

如果它在管道中间，它不知道大小，但它给出了速度和总数，从那里你可以计算出它需要多长时间，并得到反馈，这样你就知道它没有挂起。

你可能也对如何做一个旋转器感兴趣:

我能在Bash中做旋转吗?

Sure! i=1 sp="/-\|" echo -n ' ' while true do printf "\b${sp:i++%${#sp}:1}" done Each time the loop iterates, it displays the next character in the sp string, wrapping around as it reaches the end. (i is the position of the current character to display and ${#sp} is the length of the sp string). The \b string is replaced by a 'backspace' character. Alternatively, you could play with \r to go back to the beginning of the line. If you want it to slow down, put a sleep command inside the loop (after the printf). A POSIX equivalent would be: sp='/-\|' printf ' ' while true; do printf '\b%.1s' "$sp" sp=${sp#?}${sp%???} done If you already have a loop which does a lot of work, you can call the following function at the beginning of each iteration to update the spinner: sp="/-\|" sc=0 spin() { printf "\b${sp:sc++:1}" ((sc==${#sp})) && sc=0 } endspin() { printf "\r%s\n" "$@" } until work_done; do spin some_work ... done endspin

My solution displays the percentage of the tarball that is currently being uncompressed and written. I use this when writing out 2GB root filesystem images. You really need a progress bar for these things. What I do is use gzip --list to get the total uncompressed size of the tarball. From that I calculate the blocking-factor needed to divide the file into 100 parts. Finally, I print a checkpoint message for each block. For a 2GB file this gives about 10MB a block. If that is too big then you can divide the BLOCKING_FACTOR by 10 or 100, but then it's harder to print pretty output in terms of a percentage.

假设您正在使用Bash，那么您可以使用 shell函数

untar_progress () 
{ 
  TARBALL=$1
  BLOCKING_FACTOR=$(gzip --list ${TARBALL} |
    perl -MPOSIX -ane '$.==2 && print ceil $F[1]/50688')
  tar --blocking-factor=${BLOCKING_FACTOR} --checkpoint=1 \
    --checkpoint-action='ttyout=Wrote %u%  \r' -zxf ${TARBALL}
}