我昨天把我的Windows 10升级到最后一次更新,现在,当我启动vagrant up命令时,我得到了这个错误:

==> default: Booting VM...
==> default: Waiting for machine to boot. This may take a few minutes...
The guest machine entered an invalid state while waiting for it
to boot. Valid states are 'starting, running'. The machine is in the
'poweroff' state. Please verify everything is configured
properly and try again.

If the provider you're using has a GUI that comes with it,
it is often helpful to open that and watch the machine, since the
GUI often has more helpful error messages than Vagrant can retrieve.
For example, if you're using VirtualBox, run `vagrant up` while the
VirtualBox GUI is open.

The primary issue for this error is that the provider you're using
is not properly configured. This is very rarely a Vagrant issue.

当我尝试与GUI我有这个错误:

Failed to open/create the internal network 'HostInterfaceNetworking-VirtualBox Host-Only Ethernet Adapter' (VERR_INTNET_FLT_IF_NOT_FOUND).
Failed to attach the network LUN (VERR_INTNET_FLT_IF_NOT_FOUND).

我重新安装了VirtualBox 5.0.10和扩展包, 重新配置主机以太网适配器,但总是相同的错误…

什么好主意吗?


当前回答

我刚刚在Windows 8上使用VirtualBox 5.1时遇到了这个问题。原来问题出在我安装的卡巴斯基病毒防护软件上。它在windows侧的主机专用适配器上添加了“卡巴斯基反病毒NDIS 6过滤器”。当我禁用该过滤器时,虚拟机正常启动:

其他回答

这两个答案并没有解决我的问题,但把它们结合起来,我就能解决问题。 我的情况是,我试图在Windows 7 pc上安装和运行Docker,并不断得到一个错误: “看起来好像出了什么问题……按任意键继续…”

经过深入研究,我发现这个问题与Docker创建的主机网络适配器有关。 我安装了NDIS6驱动程序,但它是启用的。我试着取消检查,禁用,重新检查,启用等,但它没有帮助。

然后我卸载VB并按照第一个答案重新安装以获得NDIS5驱动程序。 这是未经检查的,所以检查它,我能够过去这个问题。

卸载Virtualbox并安装最新版本,在回答这个问题时,它是5.12。我安装了Vagrant,它会自动安装Virtualbox 5.10。我在安装Windows 1511更新后遇到了这个问题,卸载Vagrant提供的Virtualbox并安装最新版本解决了这个问题。

在尝试再次创建VirtualBox主机专用适配器之前,您可以尝试在除实际物理网络适配器之外的所有网络适配器上禁用“VirtualBox NDIS6桥接网络驱动程序”。

请看这个答案。

对我来说,将VirtualBox更新到5.1.23解决了这个问题。Windows版本可从官方网站下载。

我从Windows 7升级到Windows 10后也遇到了同样的问题。试了所有流行的答案,但都没用。最后,我知道Windows更改了适配器的名称。虚拟盒配置为使用Realtek PCIe GBE系列控制器,而设备管理器将此作为Realtek PCIe GBE系列控制器#2。选择合适的控制器解决了这个问题。