我在Go中运行一个测试，用语句打印一些东西(即用于调试测试)，但它没有打印任何东西。
func TestPrintSomething(t *testing.T) {
fmt.Println("Say hi")
}
当我在这个文件上运行go test时，输出如下:
ok command-line-arguments 0.004s
据我所知，真正让它打印的唯一方法是通过t.Error()打印它，就像这样:
func TestPrintSomethingAgain(t *testing.T) {
t.Error("Say hi")
}
输出如下:
Say hi
--- FAIL: TestPrintSomethingAgain (0.00 seconds)
foo_test.go:35: Say hi
FAIL
FAIL command-line-arguments 0.003s
gom: exit status 1
我用谷歌搜索过手册，但什么也没找到。
当前回答
以防你使用测试。M和相关的安装/拆卸;-v在这里也是有效的。
package g
import (
"os"
"fmt"
"testing"
)
func TestSomething(t *testing.T) {
t.Skip("later")
}
func setup() {
fmt.Println("setting up")
}
func teardown() {
fmt.Println("tearing down")
}
func TestMain(m *testing.M) {
setup()
result := m.Run()
teardown()
os.Exit(result)
}
$ go test -v g_test.go
setting up
=== RUN TestSomething
g_test.go:10: later
--- SKIP: TestSomething (0.00s)
PASS
tearing down
ok command-line-arguments 0.002s
其他回答
例如,
package verbose
import (
"fmt"
"testing"
)
func TestPrintSomething(t *testing.T) {
fmt.Println("Say hi")
t.Log("Say bye")
}
go test -v
=== RUN TestPrintSomething
Say hi
--- PASS: TestPrintSomething (0.00 seconds)
v_test.go:10: Say bye
PASS
ok so/v 0.002s
命令去 测试标志的描述 - v 详细输出:在运行所有测试时记录它们。同时打印所有 即使测试成功，也会调用Log和Logf中的文本。
包测试 func (*T) Log func (c *T) Log(参数…接口{}) Log使用默认格式(类似于Println)格式化其参数，并在错误日志中记录文本。对于测试，只有在测试失败或-test时才会打印文本。设置V标志。对于基准测试，文本总是打印出来，以避免性能依赖于-test的值。v标志。
t.Log()直到测试完成后才会显示，因此如果您试图调试挂起或执行不良的测试，似乎需要使用fmt。
是的:包括Go 1.13(2019年8月)之前都是这样。
这是在golang.org的24929期
Consider the following (silly) automated tests: func TestFoo(t *testing.T) { t.Parallel() for i := 0; i < 15; i++ { t.Logf("%d", i) time.Sleep(3 * time.Second) } } func TestBar(t *testing.T) { t.Parallel() for i := 0; i < 15; i++ { t.Logf("%d", i) time.Sleep(2 * time.Second) } } func TestBaz(t *testing.T) { t.Parallel() for i := 0; i < 15; i++ { t.Logf("%d", i) time.Sleep(1 * time.Second) } } If I run go test -v, I get no log output until all of TestFoo is done, then no output until all of TestBar is done, and again no more output until all of TestBaz is done. This is fine if the tests are working, but if there is some sort of bug, there are a few cases where buffering log output is problematic: When iterating locally, I want to be able to make a change, run my tests, see what's happening in the logs immediately to understand what's going on, hit CTRL+C to shut the test down early if necessary, make another change, re-run the tests, and so on. If TestFoo is slow (e.g., it's an integration test), I get no log output until the very end of the test. This significantly slows down iteration. If TestFoo has a bug that causes it to hang and never complete, I'd get no log output whatsoever. In these cases, t.Log and t.Logf are of no use at all. This makes debugging very difficult. Moreover, not only do I get no log output, but if the test hangs too long, either the Go test timeout kills the test after 10 minutes, or if I increase that timeout, many CI servers will also kill off tests if there is no log output after a certain amount of time (e.g., 10 minutes in CircleCI). So now my tests are killed and I have nothing in the logs to tell me what happened.
但(可能)Go 1.14(2020年Q1): CL 127120
测试:流日志输出在详细模式
现在的输出是:
=== RUN TestFoo
=== PAUSE TestFoo
=== RUN TestBar
=== PAUSE TestBar
=== RUN TestBaz
=== PAUSE TestBaz
=== CONT TestFoo
=== CONT TestBaz
main_test.go:30: 0
=== CONT TestFoo
main_test.go:12: 0
=== CONT TestBar
main_test.go:21: 0
=== CONT TestBaz
main_test.go:30: 1
main_test.go:30: 2
=== CONT TestBar
main_test.go:21: 1
=== CONT TestFoo
main_test.go:12: 1
=== CONT TestBaz
main_test.go:30: 3
main_test.go:30: 4
=== CONT TestBar
main_test.go:21: 2
=== CONT TestBaz
main_test.go:30: 5
=== CONT TestFoo
main_test.go:12: 2
=== CONT TestBar
main_test.go:21: 3
=== CONT TestBaz
main_test.go:30: 6
main_test.go:30: 7
=== CONT TestBar
main_test.go:21: 4
=== CONT TestBaz
main_test.go:30: 8
=== CONT TestFoo
main_test.go:12: 3
=== CONT TestBaz
main_test.go:30: 9
=== CONT TestBar
main_test.go:21: 5
=== CONT TestBaz
main_test.go:30: 10
main_test.go:30: 11
=== CONT TestFoo
main_test.go:12: 4
=== CONT TestBar
main_test.go:21: 6
=== CONT TestBaz
main_test.go:30: 12
main_test.go:30: 13
=== CONT TestBar
main_test.go:21: 7
=== CONT TestBaz
main_test.go:30: 14
=== CONT TestFoo
main_test.go:12: 5
--- PASS: TestBaz (15.01s)
=== CONT TestBar
main_test.go:21: 8
=== CONT TestFoo
main_test.go:12: 6
=== CONT TestBar
main_test.go:21: 9
main_test.go:21: 10
=== CONT TestFoo
main_test.go:12: 7
=== CONT TestBar
main_test.go:21: 11
=== CONT TestFoo
main_test.go:12: 8
=== CONT TestBar
main_test.go:21: 12
main_test.go:21: 13
=== CONT TestFoo
main_test.go:12: 9
=== CONT TestBar
main_test.go:21: 14
=== CONT TestFoo
main_test.go:12: 10
--- PASS: TestBar (30.01s)
=== CONT TestFoo
main_test.go:12: 11
main_test.go:12: 12
main_test.go:12: 13
main_test.go:12: 14
--- PASS: TestFoo (45.02s)
PASS
ok command-line-arguments 45.022s
它确实在Go 1.14中，正如Dave Cheney在“Go test -v流输出”中所证明的那样:
在Go 1.14中，Go test -v将在t.Log输出发生时进行流处理，而不是将其保存到测试运行结束。
下Go 1.14的fmt。Println和t.Log行是交错的，而不是等待测试完成，这表明当使用go test -v时，测试输出是流的。
根据戴夫的说法，优点是:
对于在测试失败时经常长时间重试的集成风格测试来说，这是一个很大的生活质量改进。 流化t.Log输出将帮助Gophers调试这些测试失败，而不必等到整个测试超时才能接收它们的输出。
警告:这里的答案不适用于同时测试多个包。
来自@VonC和@voidlogic的答案非常棒，但我想引起以下线程的注意，以防有人正在运行go test -v ./…: https://github.com/golang/go/issues/46959
问题在于与从多个包运行测试相关的实现细微差别/困难。
例如:执行go test -v -count=1 -run TestOnlyOneInstanceOfThisTestExists ./multiple/packages/exist/below/…仅在测试完成后打印日志。
但是，执行go test -v -count=1 -run TestOnlyOneInstanceOfThisTestExists ./this/path/points/to/one/package/only/…将按预期输出流。
t.Log和t.Logf会在您的测试中打印出来，但由于它与您的测试打印在同一行上，因此经常会被遗漏。我所做的是记录他们的方式，使他们脱颖而出，即
t.Run("FindIntercomUserAndReturnID should find an intercom user", func(t *testing.T) {
id, err := ic.FindIntercomUserAndReturnID("test3@test.com")
assert.Nil(t, err)
assert.NotNil(t, id)
t.Logf("\n\nid: %v\n\n", *id)
})
把它打印到终端，
=== RUN TestIntercom
=== RUN TestIntercom/FindIntercomUserAndReturnID_should_find_an_intercom_user
TestIntercom/FindIntercomUserAndReturnID_should_find_an_intercom_user: intercom_test.go:34:
id: 5ea8caed05a4862c0d712008
--- PASS: TestIntercom (1.45s)
--- PASS: TestIntercom/FindIntercomUserAndReturnID_should_find_an_intercom_user (1.45s)
PASS
ok github.com/RuNpiXelruN/third-party-delete-service 1.470s
结构测试。T和测试。B都有. log和. logf方法，听起来就是你要找的。log和. logf方法类似于fmt。打印和fmt。Printf分别。
更多详情请访问:http://golang.org/pkg/testing/#pkg-index
fmt。X打印语句在测试中确实可以工作，但是您会发现它们的输出可能不在您期望找到它的屏幕上，因此，您应该在测试中使用日志方法。
如果像您的情况一样，希望查看未失败的测试的日志，则必须提供go test -v标志(v表示冗长)。关于测试标志的更多细节可以在这里找到:https://golang.org/cmd/go/#hdr-Testing_flags
