#!/usr/bin/python3

import subprocess as sp

ip = "192.168.122.60"
status,result = sp.getstatusoutput("ping -c1 -w2 " + ip)

if status == 0: 
    print("System " + ip + " is UP !")
else:
    print("System " + ip + " is DOWN !")

在windows或linux中Ping它们，返回一个排序的列表。这是@Ahmed Essam和@Arno回复的混合/修正。

import asyncio
import re

import platform
isWindows = platform.system()


async def ping(host):
    cmd = 'ping {} {} 1'.format(host, '-n' if isWindows else '-c')
    ping_proc = \
        await asyncio.create_subprocess_shell(cmd, stdout=asyncio.subprocess.PIPE,
                                                      stderr=asyncio.subprocess.PIPE)
    stdout, stderr = await ping_proc.communicate()
    outstr = stdout.decode()

    if ping_proc.returncode == 0:
        delay = int(re.search(r'(?:time=)([\d]*)', outstr).group(1)) if 'time=' in outstr else -1
        if delay >= 0:
            # print('{} {}ms'.format(host, delay))
            return [host, delay]

    return [host, None]


async def ping_all():
    tasks = []

    for i in range(1, 256):
        ip = "192.168.1.{}".format(i)
        task = asyncio.ensure_future(ping(ip))
        tasks.append(task)

    retList = await asyncio.gather(*tasks, return_exceptions=True)
    retList = [x for x in retList if x[1] is not None]
    retList.sort(key=lambda x: int(x[0].split('.')[-1]))

    return retList


loop = asyncio.ProactorEventLoop()
asyncio.set_event_loop(loop)
pingRet = loop.run_until_complete(ping_all())

for ip, d in pingRet:
    print('{:<16s} {}ms'.format(ip, d))

使用Multi-ping (pip install multiPing)，我做了这个简单的代码(简单地复制和粘贴，如果你愿意!):

from multiping import MultiPing

def ping(host,n = 0):
    if(n>0):
        avg = 0
        for i in range (n):
            avg += ping(host)
        avg = avg/n
    # Create a MultiPing object to test hosts / addresses
    mp = MultiPing([host])

    # Send the pings to those addresses
    mp.send()

    # With a 1 second timout, wait for responses (may return sooner if all
    # results are received).
    responses, no_responses = mp.receive(1)


    for addr, rtt in responses.items():
        RTT = rtt


    if no_responses:
        # Sending pings once more, but just to those addresses that have not
        # responded, yet.
        mp.send()
        responses, no_responses = mp.receive(1)
        RTT = -1

    return RTT

用法:

#Getting the latency average (in seconds) of host '192.168.0.123' using 10 samples
ping('192.168.0.123',10)

如果你想要一个单一的样本，第二个参数“10”可以忽略!

希望能有所帮助!

import subprocess
ping_response = subprocess.Popen(["/bin/ping", "-c1", "-w100", "192.168.0.1"], stdout=subprocess.PIPE).stdout.read()

在linux上，可以创建ICMP数据报(不是原始)套接字，而不需要root(或setuid或CAP_NET_RAW): https://unix.stackexchange.com/a/592914。最后我得到了

$ id
uid=1000(raylu) gid=1000(raylu) [...]
$ sudo sysctl net.ipv4.ping_group_range='1000 1000'

import socket
import struct
import time

def main():
    ping('192.168.1.10')

def ping(destination):
    sock = socket.socket(socket.AF_INET, socket.SOCK_DGRAM, socket.getprotobyname('icmp'))
    sock.settimeout(10.0)
    start_time = time.time_ns() # python 3.7+ only

    payload = struct.pack('L', start_time)
    sock.sendto(encode(payload), (destination, 0))
    while (time.time_ns() - start_time) // 1_000_000_000 < 10:
        try:
            data, source = sock.recvfrom(256)
        except socket.timeout:
            print('timed out')
            return
        message_type, message_code, check, identifier, sequence_number = struct.unpack('bbHHh', data[:8])
        if source == (destination, 0) and message_type == ICMP.ECHO_REPLY and data[8:] == payload:
            print((time.time_ns() - start_time) // 1_000_000, 'ms')
            break
        else:
            print('got unexpected packet from %s:' % source[0], message_type, data[8:])
    else:
        print('timed out')

def encode(payload: bytes):
    # calculate checksum with check set to 0
    checksum = calc_checksum(icmp_header(ICMP.ECHO_REQUEST, 0, 0, 1, 1) + payload)
    # craft the packet again with the checksum set
    return icmp_header(ICMP.ECHO_REQUEST, 0, checksum, 1, 1) + payload

def icmp_header(message_type, message_code, check, identifier, sequence_number) -> bytes:
    return struct.pack('bbHHh', message_type, message_code, check, identifier, sequence_number)

def calc_checksum(data: bytes) -> int:
    '''RFC 1071'''
    # code stolen from https://github.com/alessandromaggio/pythonping/blob/a59ce65a/pythonping/icmp.py#L8
    '''
    MIT License

    Copyright (c) 2018 Alessandro Maggio

    Permission is hereby granted, free of charge, to any person obtaining a copy
    of this software and associated documentation files (the "Software"), to deal
    in the Software without restriction, including without limitation the rights
    to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
    copies of the Software, and to permit persons to whom the Software is
    furnished to do so, subject to the following conditions:

    The above copyright notice and this permission notice shall be included in all
    copies or substantial portions of the Software.

    THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
    IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
    FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
    AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
    LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
    OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
    SOFTWARE.
    '''
    subtotal = 0
    for i in range(0, len(data)-1, 2):
        subtotal += (data[i] << 8) + data[i+1]
    if len(data) % 2:
        subtotal += (data[len(data)-1] << 8)
    while subtotal >> 16:
        subtotal = (subtotal & 0xFFFF) + (subtotal >> 16)
    check = ~subtotal
    return ((check << 8) & 0xFF00) | ((check >> 8) & 0x00FF)

class ICMP:
    ECHO_REPLY = 0
    ECHO_REQUEST = 8

虽然这里其他答案建议的许多软件包也可以工作

我的版本的ping函数:

适用于Python 3.5及更高版本，适用于Windows和Linux。 在Windows上，如果ping命令失败且“目标主机不可达”，则返回False。 并且不显示任何输出，无论是弹出窗口还是命令行。

import platform, subprocess

def ping(host_or_ip, packets=1, timeout=1000):
    ''' Calls system "ping" command, returns True if ping succeeds.
    Required parameter: host_or_ip (str, address of host to ping)
    Optional parameters: packets (int, number of retries), timeout (int, ms to wait for response)
    Does not show any output, either as popup window or in command line.
    Python 3.5+, Windows and Linux compatible
    '''
    # The ping command is the same for Windows and Linux, except for the "number of packets" flag.
    if platform.system().lower() == 'windows':
        command = ['ping', '-n', str(packets), '-w', str(timeout), host_or_ip]
        # run parameters: capture output, discard error messages, do not show window
        result = subprocess.run(command, stdin=subprocess.DEVNULL, stdout=subprocess.PIPE, stderr=subprocess.DEVNULL, creationflags=0x08000000)
        # 0x0800000 is a windows-only Popen flag to specify that a new process will not create a window.
        # On Python 3.7+, you can use a subprocess constant:
        #   result = subprocess.run(command, capture_output=True, creationflags=subprocess.CREATE_NO_WINDOW)
        # On windows 7+, ping returns 0 (ok) when host is not reachable; to be sure host is responding,
        # we search the text "TTL=" on the command output. If it's there, the ping really had a response.
        return result.returncode == 0 and b'TTL=' in result.stdout
    else:
        command = ['ping', '-c', str(packets), '-w', str(timeout), host_or_ip]
        # run parameters: discard output and error messages
        result = subprocess.run(command, stdin=subprocess.DEVNULL, stdout=subprocess.DEVNULL, stderr=subprocess.DEVNULL)
        return result.returncode == 0

你想怎么用就怎么用。